Shielded Wire Wound SMD Power Inductor TISxxxxLS Series Shielded Wire Wound SMD Power Inductor Features • • • • Compact, low profile with low DCR and large current With magnetically shielded against radiation Flat bottom surface allows reliable mounting onto the board Available on tape and reel for auto surface mounting • RoHS Compliant Applications • • • • Portable Telephone Personal Computers DC/DC Converters, etc. Other Various Electronic Appliances Dimensions TIS 0628 / 0728 / 0730 / 0732 / 0745 / 1045 TIS 1255 / 1265 / 1275 TAITRON COMPONENTS INCORPORATED www.taitroncomponents.com Tel: (800)-TAITRON Fax: (800)-TAITFAX (800)-824-8766 (800)-824-8329 (661)-257-6060 (661)-257-6415 Rev. B/JH Page 1 of 9 Shielded Wire Wound SMD Power Inductor TISxxxxLS Series Unit=mm Type A C D E H I J TIS0628 6.0±0.20 2.8±0.20 4.00 2.00 2.20 1.50 4.00 TIS0728 7.0±0.20 2.8±0.20 4.00 2.00 2.20 1.50 4.00 TIS0730 7.0±0.20 3.0±0.20 4.00 2.00 2.20 1.50 4.00 TIS0732 7.0±0.20 3.2±0.20 4.00 2.00 2.20 1.50 4.00 TIS0745 7.0±0.20 4.5±0.30 4.00 2.00 2.20 1.50 4.00 TIS1045 10.1±0.30 4.5±0.30 6.00 3.00 3.20 2.50 5.60 TIS1255 12.5±0.30 5.5±0.35 8.60 3.00 3.20 2.50 8.60 TIS1265 12.5±0.30 6.5±0.35 8.60 3.00 3.20 2.50 8.60 TIS1275 12.5±0.30 7.5±0.35 8.60 3.00 3.200 2.50 8.60 Electrical Specifications Inductance and Rated Current Range Type Inductance Range Current Range TIS0628 4.7 ~ 100 uH 0.42 ~ 1.6 A TIS0728 3.3 ~ 56 uH 0.50 ~ 1.6 A TIS0730 3.3 ~ 100 uH 0.35 ~ 1.8 A TIS0732 3.3 ~ 1000 uH 0.13 ~ 1.9 A TIS0745 3.3 ~ 1000 uH 0.14 ~ 2.5 A TIS1045 10 ~ 1500 uH 0.22 ~ 3.0 A TIS1255 6.0 ~ 1500 uH 0.29 ~ 3.6 A TIS1265 2.0 ~ 150 uH 1.00 ~ 10 A TIS1275 1.2 ~ 220 uH 1.30 ~ 13 A Rev. B/JH www.taitroncomponents.com Page 2 of 9 Shielded Wire Wound SMD Power Inductor TISxxxxLS Series TIS 0628 / 0728 / 0730 Type: Inductance (µH) IDC(A) max. DCR (Ω) 20% Tolerance (%) 0628 0728 I sat 0730 I rms 0628 0728 0730 0628 0728 0730 3.3 20% - 0.037 0.023 - 1.60 1.80 - 1.60 1.80 4.7 20% 0.036 0.045 0.036 1.60 1.50 1.60 2.50 1.50 1.60 6.8 20% 0.052 0.059 0.041 1.50 1.30 1.50 2.20 1.30 1.50 10 20% 0.068 0.083 0.053 1.30 1.10 1.30 1.80 1.10 1.30 15 20% 0.100 0.130 0.084 1.00 0.88 1.00 1.40 0.88 1.00 22 20% 0.120 0.180 0.110 0.77 0.75 0.86 1.30 0.75 0.86 33 20% 0.180 0.240 0.160 0.69 0.65 0.65 1.10 0.65 0.65 47 20% 0.270 0.340 0.240 0.59 0.54 0.57 0.92 0.54 0.57 56 20% 0.330 0.420 0.280 0.51 0.50 0.53 0.85 0.45 0.60 68 20% 0.390 - 0.310 0.50 - 0.49 0.78 - 0.49 100 20% 0.620 - 0.450 0.42 - 0.35 0.64 - 0.35 TIS 0732 / 0745 / 1045 Type: Inductance (µH) IDC(A) max. DCR (Ω) 20% Tolerance (%) I sat I rms 0732 0745 1045 0732 0745 1045 0732 0745 1045 3.3 20% 0.023 0.020 - 1.90 2.50 - 1.90 2.30 - 4.7 20% 0.036 0.030 - 1.70 2.00 - 1.70 2.10 - 6.8 20% 0.041 0.039 - 1.60 1.70 - 1.60 1.74 - 10 20% 0.053 0.036 0.036 1.40 1.30 3.00 1.40 1.78 2.50 15 20% 0.075 0.052 0.047 1.10 1.10 2.40 1.10 1.53 2.20 22 20% 0.110 0.061 0.059 0.96 0.90 2.10 0.96 1.34 1.90 33 20% 0.160 0.096 0.082 0.75 0.82 1.60 0.75 1.09 1.70 47 20% 0.240 0.125 0.100 0.67 0.75 1.40 0.67 0.92 1.50 56 20% 0.300 0.130 0.110 0.60 0.67 1.30 0.70 0.88 1.40 68 20% 0.310 0.175 0.140 0.59 0.60 1.20 0.59 0.77 1.30 100 20% 0.450 0.250 0.200 0.45 0.50 1.00 0.45 0.65 1.10 150 20% 0.650 0.340 0.350 0.37 0.40 0.79 0.37 0.55 0.81 220 20% 1.050 0.520 0.470 0.29 0.33 0.65 0.29 0.45 0.70 330 20% 1.670 0.740 0.680 0.22 0.25 0.54 0.22 0.37 0.58 470 20% 2.050 1.050 1.030 0.20 0.22 0.47 0.20 0.31 0.47 680 20% 3.150 1.480 1.600 0.16 0.20 0.38 0.16 0.27 0.38 1000 20% 4.780 2.280 2.800 0.13 0.14 0.32 0.13 0.25 0.29 1500 20% - - 3.400 - - 0.22 - - 0.26 Rev. B/JH www.taitroncomponents.com Page 3 of 9 Shielded Wire Wound SMD Power Inductor TISxxxxLS Series TIS 1255 / 1265 / 1275 Type: Inductance (µH) IDC(A) max. DCR (Ω) 20% Tolerance (%) 1255 I sat 1265 1275 1255 I rms 1265 1275 1255 1265 1275 1.2 30% - - 0.069 - - 13.00 - - 8.20 2.0 30% - 0.0117 - - 10.0 - - 6.20 - 2.7 30% - - 0.0094 - - 10.00 - - 7.00 3.9 30% - - 0.0104 - - 9.00 - - 6.70 4.2 30% - 0.0150 - - 7.30 - - 5.50 - 5.6 30% - - 0.0116 - - 7.80 - - 6.30 6.0 30% 0.0164 - - 3.60 - - 4.90 - - 7.0 20% - 0.0177 - - 5.70 - - 5.00 - 10 20% 0.0215 0.0202 0.0156 3.40 5.00 5.50 4.30 4.80 5.40 15 20% 0.0259 0.0237 0.0184 2.80 4.20 4.70 3.90 4.40 5.00 22 20% 0.0338 0.0316 0.0263 2.30 3.50 4.00 3.40 3.80 4.00 33 20% 0.0415 0.0406 0.0395 1.90 2.80 3.20 3.10 3.40 3.40 47 20% 0.0618 0.0578 0.0528 1.60 2.40 2.70 2.50 2.80 3.00 56 20% 0.0750 0.0750 0.0670 1.45 2.20 2.30 2.30 2.50 2.60 68 20% 0.0832 0.0787 0.0778 1.30 2.00 2.00 2.20 2.40 2.40 100 20% 0.1170 0.1230 0.1250 1.10 1.60 1.90 1.80 1.90 1.90 120 20% - 0.1850 - - 1.30 - - 1.50 - 150 20% 0.1900 0.2730 0.1750 0.88 1.00 1.50 1.40 1.20 1.60 220 20% 0.2700 - 0.2580 0.72 - 1.30 1.20 - 1.30 330 20% 0.4100 - - 0.59 - - 1.00 - - 470 20% 0.5200 - - 0.49 - - 0.88 - - 680 20% 0.7600 - - 0.43 - - 0.73 - - 1000 20% 1.1200 - - 0.34 - - 0.60 - - 1500 20% 1.7300 - - 0.29 - - 0.48 - - Note: 1. Test Condition: 1KHZ, 0.5V; 2. Saturation Rated Current (I sat) is the current when the inductance becomes 30% lower than its nominal value 3. Temperature Rated Current (I rms) is the actual current when the temperature of coil becomes to ∆40 °C; 4. operating temperature range is -40~+85 °C. Rev. B/JH www.taitroncomponents.com Page 4 of 9 Shielded Wire Wound SMD Power Inductor TISxxxxLS Series Environment Characteristics General Test Item Specification Shelf Storage Condition Temperature range: 25±3 °C; Humidity: <80% relative humidity. Recommended product should be used within 6 months from time of delivery. Storage Temperature range -40~+85 °C Enviromental Test Test Item Test Method High Temperature Storage Test Temperature: 85±2 °C, Time: 48±2 hours, Tested after 1 hour at room temperature. Low Temperature Storage Test Temperature: -25±2 °C, Time: 48±2 hours, Tested after 1 hour at room temperature. Humidity Test Thermal Shock Test Temperature: 40±2 °C, 90~95% relative humidity, Time: 96±2 hours, apply rated current, Tested after 1 hour at room temperature. Requirement No case deformation or change in appearance. L change: within ±10%. First -25 °C, 30 minutes then 25 °C, 10 minutes last 85 °C, 30 minutes, as 1 cycle. Go through 5 cycles. Tested after 1 hour at room temperature. Mechanical Test Test Item Test Method Solderability Test Product with Lead-free terminal: dip pads in flux then dip in solder pot at 245±5 °C for 3 seconds. Heat Endurance of Reflow Soldering Refer to the reflow soldering condition. Go through 3 times. Vibration Test Apply frequency 10~55 HZ, 1.5mm amplitude in each of perpendicular direction for 2 hours. Shock Resistance Drop down with 981 m/s2 (100G) shock attitude upon a rubber block method shock testing machine for 1 time in each of three directions. Requirement Terminal area must have 90% min. solder coverage. No case deformation or change in appearance. L change: within ±10%. Rev. B/JH www.taitroncomponents.com Page 5 of 9 Shielded Wire Wound SMD Power Inductor TISxxxxLS Series The Condition of Reflow (recommendation) Packing Information: Reel Specifications Rev. B/JH www.taitroncomponents.com Page 6 of 9 Shielded Wire Wound SMD Power Inductor TISxxxxLS Series Tape Specifications Packing Quntities: Tape Size (mm) W P Quantities Per 13” Reel TIS0628 16 12 1000 TIS0728 16 12 1000 TIS0730 16 12 1000 TIS0732 16 12 1000 TIS0745 16 12 1000 TIS1045 24 16 750 TIS1255 24 16 500 TIS1265 24 16 500 TIS1275 24 16 350 Type Leader Tape Specifications Peel-off Force Specifications The force for tearing off cover tape is 10 ~ 60 grams in the arrow direction. Rev. B/JH www.taitroncomponents.com Page 7 of 9 Shielded Wire Wound SMD Power Inductor TISxxxxLS Series How to Order TIS 0745 L S 6R8 M - xx –TR30 Packing Code TR30: 13” Reel, RoHS Factory Location Code Tolerance Code: M: ±20%; N: ±30% Inductance Code: 3N9:3.9nH; 27N: 27nH; 6R8: 6.8uH; R22: 0.22uH Shielded Shape Code Size Code in mm 0745: 7x7x4.5; Taitron Wire Wound SMD Power Inductor Rev. B/JH www.taitroncomponents.com Page 8 of 9 Shielded Wire Wound SMD Power Inductor TISxxxxLS Series How to contact us: US HEADQUARTERS 28040 WEST HARRISON PARKAWAY, VALENCIA, CA 91355-4162 Tel: (800) TAITRON (800) 824-8766 (661) 257-6060 Fax: (800) TAITFAX (800) 824-8329 (661) 257-6415 Email: [email protected] Http://www.taitroncomponents.com TAITRON COMPONENTS MEXICO, S.A .DE C.V. BOULEVARD CENTRAL 5000 INTERIOR 5 PARQUE INDUSTRIAL ATITALAQUIA, HIDALGO C.P. 42970 MEXICO Tel: +52-55-5560-1519 Fax: +52-55-5560-2190 TAITRON COMPONETS INCORPORATED E REPRESENTAÇÕES DO BRASIL LTDA RUA DOMINGOS DE MORAIS, 2777, 2.ANDAR, SALA 24 SAÚDE - SÃO PAULO-SP 04035-001 BRAZIL Tel: +55-11-5574-7949 Fax: +55-11-5572-0052 TAITRON COMPONETS INCORPORATED, SHANGHAI REPRESENTATIVE OFFICE METROBANK PLAZA, 1160 WEST YAN’AN ROAD, SUITE 1503, SHANGHAI, 200052, CHINA Tel: +86-21-5424-9942 Fax: +86-21-5424-9931 Rev. B/JH www.taitroncomponents.com Page 9 of 9