AC/DC Power Supplies TIW Series, 4 – 24 Watt CB Scheme Features ◆ High efficiency switching power supplies ◆ Easy installation into standard flush boxes ◆ Fully encapsulated plastic housing ◆ Dust and waterproof to IP 67 ◆ Protection class ll ◆ Safety approval to IEC/EN 60950-1 EN 50178, EN 60335-1, UL 1310 class 2 ◆ Ready to meet ErP directive ◆ Universal input range 93 to 264 VAC ◆ Regulated output voltage (models from 3.3 to 24 VDC) ◆ Operating temp. range –25°C to +50°C ◆ Short circuit and overload protection ◆ 3-year product warranty The TIW series is a new range of small size DC-power supplies which have been designed particularly for applications in home and office installations. The compact modules cases fit in the standardized in-wall flush boxes or also can be mounted on walls. For connection there are models available with flying wires The power supplies comply fully with the safety and EMC standards requested for commercial and residential class ll installations. Typical applications are powering of electric devices used in home automation and in security systems like i.e. DC-motors, controllers, indicators, etc. (Mounted in standard flush box) Models Order Code Output Power max. Output Voltage Output Current Efficiency TIW 06-103 4W 3.3 VDC 1.2 A 75 % TIW 06-105 5W 5.0 VDC 1.0 A 75 % TIW 06-106 6W 6.0 VDC 1.0 A 80 % TIW 12-112 12 W* 12 VDC 1.0 A 80 % TIW 12-115 12 W* 15 VDC 0.8 A 80 % TIW 12-124 12 W* 24 VDC 0.5 A 80 % TIW 24-112 24 W* 12 VDC 2.0 A 83 % TIW 24-124 24 W* 24 VDC 1.0 A 85 % * If these models are used with 115 VAC input voltage, a 25% load reduction must be applied. http://www.tracopower.com Page 1 of 3 AC/DC Power Supplies TIW Series 4 – 24 Watt Input Specifications Input voltage range – nominal – ranges – output power derating for 12 & 24 W models 115 – 230 VAC 93 – 264 VAC (universal input) 0.45 %/V below 187 VAC down to 132 VAC 1 %/V below 115 VAC Input frequency 47 – 63 Hz No load power consumption(acc. ErP directive EC No.278/2009) < 300 mW External input fuse required (recommended values) 2 to 6 A slow blow resp. characteristic C Harmonic limits EN 61000-3-2, Class A Output Specifications Voltage set accuracy ±3 % max. Regulation – Input variation 1 % max. – Load variation (0–100%) 2 % max. Ripple and noise (20 Mhz Bandwidth) <200 mVp-p Start-up time <1s Hold-up time – Vin = 115 VAC 5 ms typ. – Vin = 230 VAC 20 ms typ. Overload protection by current limit TIW 06-xxx & TIW 24-xxx models: <2.5 A TIW 12-xxx models: <3.5 A Short circuit protection foldback (automatic recovery) General Specifications Operating Temperature –25°C to +50°C Over temperature protection built in Protection class class II as per IEC/EN 61140 Safety standards – CB test certificate IT safety IEC 60950-1:2005(2nd)+A1:2009+A2:2013, EN 60950-1:2006+A1:2010+A2:2013+ A11:2009+A12:2011 – BV certificate household appliance IEC/EN 60335-1 safety of transformers IEC/EN 61558-2-16, IEC/EN 61558-2-8 used in conjunction with IEC/EN 61558-1 lamp controlgear IEC/EN 61347-2-13 used in conjunction with IEC/EN 61347-1 electronic equipment for power installation IEC 62103 (1st Ed.), EN 50178:1997 – CSA certificate of compliance IT safety UL 60950-1(2nd Ed.)+Am1:2011, CAN/CSA-C22.2 No.60950-1-07+Am1:201 class 2 power units UL 1310 (6th Edition), CAN/CSA-C22.2 No.223-M91(R2008) – Certification documents www.tracopower.com/overview/tiw Electromagnetic compatibility (EMC), emissions EN 61000-6-3 – Conducted RI suppression on input EN 55022 class B, EN 55014-1 – Radiated RI suppression EN 55022 class B, EN 55014-1 Electromagnetic compatibility (EMC), immunity – Electrostatic discharge (ESD) – Radiated RF field immunity – Electrical fast transient / burst immunity – Surge immunity line – ground – Surge immunity line – line – Surge immunity output – Immunity to conducted RF disturbances – Mains voltage dips and interruptions EN 61000-6-2-1, IEC 61204-3 EN 61000-4-2 4 kV / 8 kV EN 61000-4-3 3 V/m EN 61000-4-4 1 kV / 0.5 kV EN 61000-4-5 2 kV EN 61000-4-5 1 kV EN 61000-4-5 0.5 kV EN 61000-4-6 3 V EN 61000-4-11 30 % /10 mS, 60 % /100 mS All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 AC/DC Power Supplies TIW Series 4 – 24 Watt General Specifications Efficiency (average at power consumption 25-100%) 82 % min. Casing material plastic (UL 94V-0 rated) Casing protection IP 67 Reliability, calculated MTBF according to IEC 61709 www.tracopower.com/overview/tiw Humidity (non condensing) 5 – 95 % rel. H max. Environment – Vibration acc. IEC 60068--2-6 Part 2, test Fe: Vibration (sinusoidal) – Shock acc. IEC 60068-2-27 Part 2, test Ea: Shock Connection wires – Input 2 x 570 mm +30/-0 (black/white) AWG 18 – Output 2 x 200 mm +20/-0 (red/black) AWG 20 Environmental compliance – Reach www.tracopower.com/overview/tiw – RoHS RoHS directive 2011/65/EU Weight – 24 Watt models: 100 g (3.8 oz) – other models: 80 g (2.7 oz) Outline Dimensions TIW 6 & 12 Watt models: TIW 24 Watt model: 63 .0 3.2 R 23.5 Flat 2-core cable 16 -18AWG. Outer insulation 3.5mm x 7.0mm typ. 3.2 23.5 8mm 20.5 570mm (+30/-0) Flat 2-core cable 16 -18AWG. Outer insulation 3.5mm x 7.0mm typ. R .5 27 600mm 3.2 20.5 40mm 8mm 55 .0 15.4 12.5 15.4 50.2 56.0 Bottm View N L .5 3.2 12.5 N L Bottm View Input 4.5 4.0 Output 52.0 +- 48.0 Input 31 Output +- Ø 1 .8 Ø 1 .8 Ø 1. 8 200mm Ø 1 .8 4.0 20AWG/BLACK 5.0±2 20AWG/RED Side View 5.7 Top Side 20AWG/BLACK 4.5 32.0 20AWG/RED 5.0±2 200mm (+20/-0) 23.6 Side View 5.7 Tolerances: ±0.2mm Top Side Tolerances: ±0.2mm Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com www.tracopower.com Rev. March 26. 2015 Page 3 of 3