AC/DC Power Modules TMPS 03 Series, 3 Watt CB Scheme Features ◆ PCB Power module in 1" x 1" package ◆ To comply with ErP directive ◆ No load input power <150mW, to UL 60950-1 comply with ErP directive ◆ Operating temperature range –25°C to +70°C ◆ Certified to EN60335-2 (household appliance) ◆ EMI meets EN 55022, class B ◆ Protection class II ◆ 3-year product warranty The TMPS-03 series are ultra compact AC/DC power supplies in a fully encapsulated plastic casing for PCB mount. Their safety approvals and extended operating temp. range from –25°C to +70°C qualify them for worldwide markets. They are certified to EN 60335 for household appliance and offer an interesting solution for space critical applications in commercial, and industrial electronic equipment and if compliance to ErP directive is required. Models Order code Output power max. Output Current max. peak 1) Efficiency TMPS 03-103 3.3 VDC 900 mA 1170 mA 70 % TMPS 03-105 5.0 VDC 600 mA 780 mA 72 % 9.0 VDC 333 mA 430 mA 77 % 12 VDC 250 mA 320 mA 78 % TMPS 03-115 15 VDC 200 mA 260 mA 78 % TMPS 03-124 24 VDC 125 mA 160 mA 78 % TMPS 03-109 TMPS 03-112 1) Output Voltage 3W < 30s with maximum duty cycle of 10%, average output power must not exceed 3W http://www.tracopower.com Page 1 of 3 AC/DC Power Modules TMPS 03 Series 3 Watt Input Specifications Input voltage ranges – AC input 85 – 264 VAC – DC Input 120 – 370 VDC Input frequency 47 – 63 Hz Input current at full load (115 VAC / 230 VAC nominal input) 62 mA typ. No-Load power consumption 150 mW max. Output Specifications Voltage set accuracy ±2 % max. Minimum load no minimum load required Ripple and noise (20 MHz bandwidth) 70 mVp-p max. Regulation – Input variation 1 % max. Regulation – Load variation 1 % max. Hold-up time 8 ms typ. (at 115 VACand full load) Current limitation at 150 % typ. (auto recovery) (Operation under over-load conditions may cause demage) Over load protection 150 % of Iout nominal typ. (foldback, auto recovery) Short circuit protection continuous Max. capacitive load 3.3 5.0 9.0 12 15 24 VDC VDC VDC VDC VDC VDC model: model: model: model: model: model: 1200 µF 820 µF 470 µF 330 µF 270 µF 180 µF General Specifications Temperature ranges – Operating (convection cooling) –25°C to +70°C – Power derating above +60°C 5.0 %/K – Storage (non operating) –40°C to +85°C Temperature coefficient 0.05 %/°C Humidity (non condensing) 95 % rel max. Switching frequency (pulse width modulation PWM) 65 kHz typ. Isolation voltage – Input/Output 3‘000 VAC Isolation resistance (500 VDC) >100 MOhm Reliability /calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >1.2 mio h Electromagnetic compatibility– Conducted input RI suppression EN 55022, class B, FCC part 15, level B (EMC), emissions – Radiated input suppression EN 55014-1, EN55014-2 Electromagnetic compatibility (EMC), Immunity EN 61204-3 – Electrostatic discharge ESD EN 61000-4-2, air 8 kV / 4 kV, criteria A – RF field immunity EN 61000-4-3, 10V/m 80% AM criteria A – Electrical fast transients/burst immunity EN 61000-4-4, 2kV DC criteria A – Surge EN 61000-4-5, 1kV criteria A – Conducted RF EN 61000-4-6, 10Vrms criteria A – Magnetic field immunity EN 61000-4-8, 30A/m criteria A – Mains voltage dips and interruptions EN 61000-4-11 95 % 10 ms, criteria A 60 % 200 ms, criteria A 95 % 5000 ms, criteria B All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 AC/DC Power Modules TMPS 03 Series 3 Watt General Specifications (continued) Protection class II Acording IEC/EN 60536 Safety standards UL 60950-1 and CSA C22.2 No. 60950-1-07 IEC/EN 60950-1 EN 60335-1 – Certification documents www.tracopower.com/overview/tmps03 Environmental compliance – Reach www.tracopower.com/overview/tmps03 – RoHS RoHS directive 2011/65/EU Physical Specifications Casing material plastic resin + fiberglass (UL 94V-0 rated) Pin copper alloy with gold plated nickel subplate Weight 17.4 g (0.61 oz) Outline Dimensions TMPS 03: 5.08 (0.20) 2.54 2.54 (0.10) (0.10) 25.4 (1.00) Pinout 2 5 4 25.4 (1.00) Pin 20.3 (0.80) 1 3 10.16 10.16 (0.40) (0.40) 1 AC(N) 2 AC(L) 3 NC 4 –Vout 5 +Vout 25.4 (1.00) 16.3 (0.64) 5.08 (0.20) Dimensions in[mm], () = Inches Tolerances = 0.5mm (0.01) Pin diameter ø 0.6 mm (0.02 ± 0.004) Ø 0.6 (Ø 0.02) Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com www.tracopower.com http://www.tracopower.com Rev. July 07. 2015 Page 3 of 3