DC/DC Converters TVN 5WI Series, 5 Watt Features ◆ Ultra low ripple and noise 10 mVp-p typ. ◆ 6-side shielded DIP-24 metal package ◆ Input filter to meet EN55022, class B ◆ Ultra wide 4:1 input voltage range 9–36, 18–75 VDC ◆ Operating temperature range –40°C to +85°C without derating ◆ Under voltage lockout ◆ I/O isolation 1500 VDC ◆ Adjustable output voltage ◆ No minimum load required ◆ Remote On/Off ◆ 3-year product warranty The TVN 5WI series is a ultra low ripple and noise 5 Watt dc/dc converter in six side shielded metal package. The conducted noise complies with EN 55022 class B and makes this converters the ideal solution for audio, measurement and detection circuits. Standard features include remote On/Off, over voltage protection, under voltage shut down and short circuit protection. Models Order code TVN 5-2410WI TVN 5-2411WI TVN 5-2412WI TVN 5-2413WI TVN 5-2415WI TVN 5-2421WI TVN 5-2422WI TVN 5-2423WI TVN 5-2425WI TVN 5-4810WI TVN 5-4811WI TVN 5-4812WI TVN 5-4813WI TVN 5-4815WI TVN 5-4821WI TVN 5-4822WI TVN 5-4823WI TVN 5-4825WI http://www.tracopower.com Input voltage range 9 – 36 VDC (24 VDC nominal) 18 – 75 VDC (48 VDC nominal) Output voltage 3.3 VDC 5.0 VDC 12 VDC 15 VDC 24 VDC ±5 VDC ±12 VDC ±15 VDC ±24 VDC 3.3 VDC 5.0 VDC 12 VDC 15 VDC 24 VDC ±5 VDC ±12 VDC ±15 VDC ±24 VDC Output current max. Efficiency typ. 1‘515 mA 1‘000 mA 416 mA 333 mA 208 mA ±500 mA ±208 mA ±166 mA ±104 mA 1‘515 mA 1‘000 mA 416 mA 333 mA 208 mA ±500 mA ±208 mA ±166 mA ±104 mA 80 % 83 % 86 % 86 % 86 % 84 % 85 % 86 % 87 % 80 % 83 % 85 % 86 % 88 % 83 % 85 % 86 % 86 % Page 1 of 4 DC/DC Converters TVN 5WI Series 5 Watt Input Specifications Input current at no load 7 mA typ. Start-up voltage 24 Vin models: < 9.0 VDC 48 Vin models: < 18 VDC Under voltage shut down (lock-out circuit) 24 Vin models: 8.5 VDC typ. 48 Vin models: 16 VDC typ. Surge voltage (1 sec. max.) 24 Vin models: 50 V max. 48 Vin models: 100 V max. Conducted noise EN 55022 class Binternal filter for 48 Vin models with two 4.7μF/100V MLCC input capacitor in parallel ESD (electrostatic discharge) EN 61000-4-2, air ±8 kV, contact ±6 kV, perf. criteria A Radiated immunity EN 61000-4-3, 20 V/m, perf. criteria A Fast transient / surge (with external input capacitor) – external input capacitor 24 Vin models: 48 Vin models: EN 61000-4-4, ±2 kV, perf. criteria A EN 61000-4-5, ±2 kV perf. criteria A Nippon chemi-con KY 220 µF, 100 V, ESR 48 mOhm and TVS 70V, 3000W peak (SMDJ70A) in parallel Nippon chemi-con KY 220 µF, 100 V, ESR 48 mOhm and TVS 120V, 3000W peak (SMDJ120A) in parallel Conducted immunity EN 61000-4-6, 10 Vrms, perf. criteria A Output Specifications Voltage set accuracy ±1 % Voltage adjustment range (single output models only) single output models: -10%, +20% dual output models: ±10 % Regulation – Input variation Vin min. to Vin max. – Load variation 0 – 100 % single output models: dual output models: – Load cross variation 25 % / 100 % 0.2 % max. 0.5 % max. 1 % max. 3 % max. Minimum load not required Temperature coefficient ±0.02 %/K Ripple and noise (20 MHz bandwidth) 10 mVp-p typ. Start up time (constant resistive load) – Power On 50 ms typ. – Remote On 50 ms typ. Transient response (50% load step change) 250 µs typ. Short circuit protection continuous, automatic recovery Over load protection at 170 % of Iout nom. hiccup mode Over-voltage protection Capacitive load (max. values) at 135 % of Vout nom. 3.3 5.0 12 15 24 ±5 ±12 ±15 ±24 VDC VDC VDC VDC VDC VDC VDC VDC VDC models: models: models: models: models: models: models: models: models: 2’200 µF 1’000 µF 220 µF 150 µF 100 µF 680 µF (each output) 150 µF (each output) 150 µF (each output) 100 µF (each output) All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 4 DC/DC Converters TVN 5WI Series 5 Watt General Specifications Temperature ranges – Operating –40°C to +85°C (without derating) – Casing temperature +105°C max. – Storage –55°C to +125°C Thermal impedance – Natural convection 20 K/W Humidity (non condensing) 5 – 95 % rel. H Isolation voltage (60 sec.) – Input / Output 1600 VDC Isolation resistance – Input / Output (500 VDC) >1 GOhm Isolation capacitance – Input / Output 1’200 pF max. Switching frequency 300 kHz typ. (pulse width modulation PWM) Thermal shock, mechanical shock & vibration MIL-STD-810F – Test conditions www.tracopower.com/products/mil810.pdf Remote On/Off – On: 3.0 ... 12 VDC or open circuit – Off: 0 ... 1.2 VDC or short circuit pin 23 and pin 22 – Off idle current: 3.0 mA Reliability, calculated MTBF (MIL-HDBK-217F, at +70°C, ground benign) 4.4 mio. h Environmental compliance – Reach www.tracopower.com/overview/tvn5wi – RoHS RoHS directive 2011/65/EU Output Voltage Adjustment Trim up Trim down Trim +Vout Rd Ru Trim - Vout Nominal output voltage at open Trim input Ru, Rd for adjustment to be advised All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 3 of 4 DC/DC Converters TVN 5WI Series 5 Watt Physical Specifications Casing material copper Baseplate material non conductive FR4 Potting material epoxy (UL94V-0 rated) Weight 14.8 g (0.52oz) Soldering temperature max. +265°C / 10 sec. Outline Dimensions 2.0 2.54 2.54 (0.1) (0.1) 17.78 (0.7) 27.94 (1.1) (0.787) 20.0 (0.4 ±0.02) (0.18) 4.5 10.2 ±0.5 2.4 15 14 13 Pin (0.094) 24 23 22 15.24 Bottom View Pin-Out (0.6) 10 11 12 1 2 3 2.54 2.54 (0.1) (0.1) Single Dual 1 +Vin (Vcc) 2 +Vin (Vcc) 3 Case 10 No pin Common 11 No pin +Vout 1 12 Case 13 TRIM 14 –Vout 15 +Vout –Vout 2 Common 22 Remote On / Off 23 –Vin 24 –Vin (0.079) 32.0 (1.26) Dimensions in [mm], () = Inch Pin diameter: 1.0 ±0.1 (0.04 ±0.004) Pin pitch tolerances: ±0.25 (±0.01) Case tolerances: ±0.5 (±0.02) Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com www.tracopower.com Rev. August 24. 2015 Page 4 of 4