TRACOPOWER TMR2422

DC/DC Converters
TMR Series, 2 Watt
RoHS
compliant
Features
◆ 2 Watt in SIL Package
◆ Regulated Output
◆ Wide 2 : 1 Input Range
◆ No external Capacitors needed
◆ Low Ripple and Noise
◆ Indefinite Short-Circuit Protection
◆ External On/Off - Control
◆ Lead free Design, RoHS compliant
◆ 3 Year Product Warranty
The TMR series is a range of miniature regulated 2 Watt DC/DC- converters in a SILpackage. Requiring only 2cm2 board space they provide a state of art functionality.
Wide 2:1 Input voltage range, 1000 VDC isolation voltage, external on/off control
and a temperature range of -40°C – 75°C with no derating makes this converter
suitable for many applications in telecommunication, control units and industrial
equipments.
Models
Ordercode
Input voltage range
TMR 0510
TMR 0511
Output voltage
Output current max.
Efficiency typ.
3.3 VDC
500 mA
64 %
5 VDC
400 mA
66 %
12 VDC
167 mA
71 %
TMR 0521
±5 VDC
±200 mA
64 %
TMR 0522
±12 VDC
±83 mA
69 %
TMR 0523
±15 VDC
±67 mA
71 %
TMR 1210
3.3 VDC
500 mA
70 %
TMR 0512
4.5 – 9.0 VDC
TMR 1211
5 VDC
400 mA
73 %
12 VDC
167 mA
80 %
TMR 1221
±5 VDC
±200 mA
73 %
TMR 1222
±12 VDC
±83 mA
78 %
TMR 1223
±15 VDC
±67 mA
78 %
TMR 2410
3.3 VDC
500 mA
71 %
TMR 2411
5 VDC
400 mA
74 %
TMR 1212
TMR 2412
9 – 18 VDC
18 – 36 VDC
12 VDC
167 mA
81 %
TMR 2421
±5 VDC
±200 mA
74 %
TMR 2422
±12 VDC
±83 mA
78 %
TMR 2423
±15 VDC
±67 mA
80 %
TMR 4810
3.3 VDC
500 mA
70 %
TMR 4811
5 VDC
400 mA
73 %
TMR 4812
36 – 75 VDC
12 VDC
167 mA
79 %
TMR 4821
±5 VDC
±200 mA
71 %
TMR 4822
±12 VDC
±83 mA
77 %
TMR 4823
±15 VDC
±67 mA
77 %
http://www.tracopower.com
Page 1 of 3
DC/DC Converters
TMR Series
2 Watt
Input Specifications
Input current at full load (nominal input)
5
12
24
48
Vin
Vin
Vin
Vin
models:
models:
models:
models:
667 mA max.
242 mA max.
119 mA max.
62 mA max.
Surge voltage (100 msec. max.)
5
12
24
48
Vin
Vin
Vin
Vin
models:
models:
models:
models:
15 V max.
25 V max.
50 V max.
100 V max.
Input Filter
capacitor type
Start up time
< 1ms (at nominal input and resistive load)
Output Specifications
Voltage set accuracy
Regulation
±2%
– Input variation Vin min. to Vin max.
– Load variation 25 – 100 %:
± 0.5 % max.
± 0.75 % max. for single output models
± 1.0% max. for dual output models
Ripple and noise (20 MHz Bandwidth)
50 mVpk-pk max
Temperature coefficient
± 0.1 % / °C
Short circuit protection
continuous, automatic recovery
Minimum load
25% of rated max current (operation at lower
load condition is safe but a higher output ripple
will be experianced)
Capacitive load
3.3 VDC / 5 VDC output models: 2’200 µF max. / 1’000 µF max.
12 VDC / ±5 VDC output models: 70 µF max. / ±470 µF max.
±12 VDC / ±15 VDC output models: 100 µF max. / ± 47 µF max.
General Specifications
Temperature ranges
– Operating
– Storage
– 40 °C ... + 75 °C (no derating)
– 55 °C ... + 105 °C
Humidity (non condensing)
95 % rel. H max.
Reliability, calculated MTBF (MIL-HDBK-217 F)
> 2.3 Mio h @ 25°C
Isolation voltage
– Input/Output
1’000 VDC
Isolation capacity
– Input/Output
300 pF max.
Isolation resistance
– Input/Output (500 VDC)
> 1‘000 M Ohm
Switching frequency
Remote On/Off
100 to 650 kHz (PFM)
ON: open or high impedance
OFF: 3...6mA input current applied via 1KW resistor
OFF stand by input current max 1mA
Physical Specifications
Case material
non-conductive plastic
Potting material
epoxy, UL 94V-0 - rated
Weight
4.8g (0.17oz)
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
http://www.tracopower.com
Page 2 of 3
DC/DC Converters
TMR Series
2 Watt
EMC Characteristics
- Use an electrolytic low ESR capacitor at input side to reduce reflected ripple current.
- In order to meet EN55022 class B additionally use a choke to build an L/C filter as follows:
+
L
+
– C
Input
Recommended values for filter:
+
TMR
–
Input
C
L
Output
5VDC
100µF
10µH
–
12VDC
100µF
10µH
24VDC
10µF
120µH
48VDC
10µF
120µH
Outline Dimensions mm (inches)
5
6
7
8
3.2
2.0
±0.5
(0.08
±0.025 )
2.54 2.54
(0.1)
(0.1)
Pin
Single
Dual
1
–Vin (GND)
–Vin (GND)
2
+Vin (Vcc)
+Vin (Vcc)
3
Remote On/Off
Remote On/Off
5
No function
No function
6
+Vout
+Vout
7
–Vout
Common
8
No function
–Vout
(0.16)
11.1 (0.44)
4.0
0.5 (0.02)
0.5 (0.02)
(0.36)
3
9.2
2
(0.13)
1
Pin-Out
0.25 (0.01)
Bottom view
2.54 2.54 2.54
5.08
(0.2)
(0.1)
21.8
(0.1)
(0.1)
(0.86)
Specifications can be changed without notice
Rev. 07/05.2
Jenatschstrasse 1 · CH-8002 Zurich · Switzerland
Tel. +41 43311 4511 · Fax +41 43311 4545 · [email protected] · www.tracopower.com
Page 3 of 3