FCR Series

TOKEN
FCR, RCA, RCN Chip Resistors
Surface Mount
Chip Resistors
Token has introduced precision surface-mount
resistor networks, chip array, and flip-chips.
Preview
Token has introduced precision surface-mount resistor networks,
chip array, and flip-chips. Those no-lead packages are optimized
to meet new automotive industry requirements for temperature
and humidity, while offering high repeatability and stable
performance for industrial, telecommunication, and consumer
electronics.
Suitable for processing on automatic SMD assembly systems,
those new devices are RoHS-compliant and compatible with
lead (Pb)-free and tin/lead (Sn/Pb) reflow and vapor-phase soldering processes.
Flip Chip Resistor FCR Series:
● The resistor flip chip configurations (FCR Series) are available in industry standard EIA0603, EIA0805,and EIA1206.
● Power Rating 1/10W, 1/8W, and 1/4W are available in max. voltage
100V, 300V, and 300V respectively.
● Resistance tolerance is tight to F(± 1%), J(± 5%) with resistance range
1Ω to 10MΩ.
Resistor Chip Array RCA Series:
● Its small 1.6mm by 3.2mm package enables the design of high-density circuits.
● The resistor chip array (RCA Series) offers a low cost when compared to using four high-precision resistors.
● The devices feature precision ratio tolerances to F(± 1%), G(± 2%), and J(± 5%) are available with resistance range 10Ω to 1MΩ.
Resistor Networks RCN Series:
● The (RCN) resistor networks offer a resistance range from 10Ω to 1MΩ at operating temperature range
-55°C~+125°C.
● All devices offer power ratings of 1/16W at +70°C per resistor, custom configurations of the devices are
available.
Full line products meet RoHS compliant. Detailed specifications, both mechanical and electrical, please contact
our sales representative for more information.
Version 2010
http://www.token.com.tw/
rfq token.com.tw
01 of 06
TOKEN
FCR, RCA, RCN Chip Resistors
FCR Series Dimensions (Unit: mm)
L
124
W
L1
H
L2
Dimensions Type
L
W
H
L1
L2
FCR 03
1.60 ± 0.10
0.80 ± 0.10
0.45 ± 0.10
0.30 ± 0.20
0.30 ± 0.20
FCR 05
2.00 ± 0.15
1.25 ± 0.15
0.50 ± 0.10
0.40 ± 0.20
0.35 ± 0.15
FCR 06
3.10 ± 0.15
1.55 ± 0.15
0.55 ± 0.10
0.50 ± 0.25
0.50 ± 0.25
FCR Series Dimensions (Unit: mm)
L2
L1
124
R1
R2
R3
R4
W
H
Q
P
R1=R2=R3=R4
L
Type
RCA03-4D (0603)
L
3.2±0.2
W
1.6±0.15
H
0.5±0.1
L1
0.30±0.15
L2
0.35Max
P
0.8±0.1
Q
0.5±0.1
FCR Series Dimensions (Unit: mm)
L1
S473
S Circuit
L2
R Circuit
W
H
Q
P
L
Type
RCN06-10R
RCN06-10S
02 of 06
L
W
H
L1
L2
P
Q
6.4 ± 0.2
3.1 ± 0.2
0.55 ± 0.1
0.5 ± 0.3
0.5 ± 0.2
1.27 ± 0.1
0.8 ± 0.2
http://www.token.com.tw/
rfq token.com.tw
Version 2010
TOKEN
FCR, RCA, RCN Chip Resistors
FCR Series Electrical Specifications
Type
Power
Ratingat 70°C
Max. Max. Overload
RCWV
Voltage
FCR 03
1/10W
50V
100V
FCR 05
1/8W
150V
300V
FCR 06
1/4W
200V
300V
Resistance
Tolerance(%)
± 1% (F)
± 5% (J)
± 1% (F)
± 5% (J)
± 1% (F)
± 5% (J)
Resistance Range (Ω)
Min.
Max.
10Ω
1MΩ
1Ω
10MΩ
10Ω
1MΩ
1Ω
10MΩ
10Ω
1MΩ
1Ω
10MΩ
Standard
ResistanceValues
E-96
E-24
E-96
E-24
E-96
E-24
RCA Series Electrical Specifications
Type
Rated
Power
at70°C
RCA03-4D
(0603)
0.063
Resistance Range
G(±2%)
F(±1%)
J(±5%)
E-96
E-24
Max.
Max.
T.C.R.
Working Overload
(ppm/°C)
Voltage
Voltage
50V
100V
± 200
Jumper
Jumper
Rated Resistance
Current
Value
Operating
Temperature
Range
1A
50mΩ
MAX
Number of
Terminals
Number
of
Elements
Operating
Temperature
Range
10
8
-55°C~+125°C
100Ω~470KΩ 10Ω~1MΩ
-55°C~+125°C
RCN Series Electrical Specifications
Type
Rated
Power
at70°C
RCN06-10R
1/16W
RCN06-10S
Version 2010
Resistance
Max.
Max.
T.C.R.
Range
Working Overload
(ppm/°C)
Voltage
Voltage
J (±5%) E-12
50V
100V
±200
http://www.token.com.tw/
10Ω~1MΩ
rfq token.com.tw
03 of 06
TOKEN
FCR, RCA, RCN Chip Resistors
Environmental Characteristics
Item
DC Resistance
Specification
J: ±5%, F: ±1%
Temperature
Coefficient of
Resistance(TCR)
J: ±200ppm/°C
F: ±100ppm/°C
Short Time Overload
J:ΔR≤ ± (2%+0.1Ω)
F:ΔR≤ ± (1%+0.05Ω)
Resistance to Solder Heat
Solderability
Temperature Cycle
Terminal Strength
J:ΔR≤ ± (1%+0.1Ω)
F:ΔR≤ ± (0.5%+0.05Ω)
No mechanical damage
Over 95% of termination
must becovered with solder
J:ΔR≤ ± (1%+0.1Ω)
F:ΔR≤ ± (0.5%+0.05Ω)
No mechanical damage
ΔR≤ ± (0.5%+0.05Ω)
No mechanical damage
Load Life
J:ΔR≤ ± (3%+0.1Ω)
F:ΔR≤ ± (1%+0.05Ω)
Load Life Humidity
J:ΔR≤ ± (3%+0.1Ω)
F:ΔR≤ ± (1%+0.05Ω)
Intermittent Overload
ΔR≤ ± (5%+0.1Ω)
No mechanical damage
Test Method
JIS C 5202 5.1
JIS C 5202 5.2 / IEC 115-1 4.8.4.2;
T1
T2
Test emperature: 25°C→-55°C
25°C →-55°C
JIS C 5202 5.5 / IEC 115-1 4.13;
2.5xRated voltage (Max. Overload Voltage) for 5 sec.
measure resistance after 30 minutes
JIS C 5202 6.4 / IEC 115-1 4.18;
With 260 ± 5 °C for 10 ± 1 sec.
JIS C 5202 7.4 / IEC 115-1 4.17; After immersing flux, dip in the
235 ± 5°C molten solderbath for 2 ± 0.5 sec.
JIS C 5202 7.4 / IEC 115-1 4.19; Repeat 5 cycles as follow;
-55°C(30minutes)+25°C(10~15minutes)
+125°C(30minutes)+25°C(10~15minutes)
JIS C 5202 6.1; 500g for 10 seconds
JIS C 5202 7.10 / IEC 115-1 4.25.1;
Permanent resistance change after 1000+48/-0
hours (1.5 hours ON,0.5hour OFF) at RCWV or Max.
Keep the element at 70 ± 3°Cambient
JIS C 5202 7.9 / IEC 115-1 4.24.2;
Maintain the temperature of the element at
40 ± 2 °Cand 90~95% RH with the ratedvoltage applied.
Cycle ON for 1.5hours and Off for 0.5 hour for 1000+48/-0
hours.After one hour, measure the resistance value.
JIS C 5202 5.8; 2.5xRated Voltage(Max.OverloadVoltage),
1secON,25sec OFF, test 10,000 cycles
Marking
124
3 digit marking
for E24(J)
100~10Ω
122~1.2KΩ
473~47KΩ
105~1MΩ
04 of 06
1542
4 digit marking
for E96(F)
22R1~22.1Ω
1020~102Ω
1542~15.4KΩ
http://www.token.com.tw/
02C
3 digit marking
for E96(F)
02C
102102=10.2KΩ
15E
15E
140104=1.4MΩ
rfq token.com.tw
Version 2010
TOKEN
FCR, RCA, RCN Chip Resistors
Tape Specifications (Unit: mm)
P0
P2
D
E
W F
B
G
P1
A
Codes
A
B
W
F
E
P1
P2
P0
FCR03
1.10±0.20
1.90±0.20
8.0±0.3
3.50±0.05
1.75±0.10
4.0±0.1
2.00±0.05
4.0±0.1
FCR05
1.65±0.20
2.45±0.20
8.0±0.3
3.50±0.05
1.75±0.10
4.0±0.1
2.00±0.05
4.0±0.1
FCR06
2.00±0.10
-0.15
3.57±0.10
-0.15
8.0±0.3
3.50±0.05
1.75±0.10
4.0±0.1
2.00±0.05
4.0±0.1
D
1.5±0.1
-0
1.5±0.1
-0
1.5±0.1
-0
G
2.75
2.75
2.75
Tape Specifications (Unit: mm)
T
B
N
D
C
Symbol
Dimension
A
178 ± 2.0
B
20 ± 0.5
G
A
C
13.0 ± 0.5
D
20 min.
G
100 ± 1.5
N
80.0 ± 0.5
T
14.9 max.
How to Order
RCN
06
10
R
103
J
TRS







 Type: SMD Network
 Size: 06 (6.40×3.10mm)
 Number of Terminals: 10
 Circuit Structure: R Circuit,S Circuit
 Nominal Resistance
Code
3-Digit
Version 2010
Resistance Tolerance
E12 Series
EX 10Ω=100
100Ω=101
http://www.token.com.tw/
 Resistance Tolerance (%)
Code
J
Resistance Tolerance
±5%
 Package
Code
TR
P
rfq token.com.tw
Package
Taping Reel
Bulk
05 of 06
TOKEN
FCR, RCA, RCN Chip Resistors
How to Order
FCR
03
100
J
TR





 Part Number: FCR
 Size
 Resistance Tolerance
Code
03
05
06
Size (mm)
1.60×0.80
2.00×1.25
3.10×1.55
Code
F
J
 Package
 Nominal Resistance
Code
SMD
Elements
Jumper
Resistance Tolerance
±1%
±5%
Code
TR
P
Nominal Resistance
E24 Series
3-Digit EX 10Ω=100
47Ω=470
E96 Series
4-Digit EX 10.2Ω=10R2
10KΩ=1002
000
Package
Taping Reel
Bulk
How to Order
RCA
03
4
D
101
J
TR







 Part Number: RCA
 Size: 03 (3.20×1.60mm)
 Number of circuits: 4 (4 circuits)
 Electrode Structure: D (protruding electrode)
 Nominal Resistance
Code
SMD
Elements
Jumper
Nominal Resistance
E24 Series
3-Digit
EX 10Ω=100
47Ω=470
E96 Series
4-Digit
EX 10.2Ω=10R2
10KΩ=1002
000
 Resistance Tolerance
Code
F
G
J
Resistance Tolerance
±1%
±2%
±5%
 Package
Code
TR
P
Package
Taping Reel
Bulk
Back to 1st Page - Surface Mount Resistors FCR, RCA, RCN
06 of 06
http://www.token.com.tw/
rfq token.com.tw
Version 2010