06056 DFN-16 PACKAGE Only One Name Means ProTek’Tion™ package outline & pad layout P1 outline dimensions dim millimeters inches min max min max P1 3.90 4.10 0.154 0.161 P2 1.50 1.70 0.059 0.067 P3 0.74 0.84 0.029 0.033 L1 0.21 0.28 0.008 0.011 L2 0.23 0.30 0.009 0.012 L3 0.178 0.228 0.007 0.009 p 0.50 BSC P2 Pin 1 Reference TOP VIEW END VIEW L3 0.020 BSC G1 2.90 3.10 0.114 0.122 G2 0.40 0.50 0.016 0.020 G3 0.15 0.25 0.006 0.010 G4 0.25 0.35 0.010 0.014 A1 0.00 0.05 0.00 0.002 K 0.33 0.40 0.013 0.016 NOTEs SIDE VIEW L2 A1 p L1 1 8 G2 K 10 1. Controlling dimension: millimeters. 2. Dimensioning and tolerances per ANSI Y14.M, 1985. 3. Dimension L1 applies to terminal and is measured between 0.25 and 0.30mm from terminal. 4. Coplanarity applies to the exposed pad as well as the terminals. G3 9 G4 G1 BOTTOM VIEW pad layout dimensions dim millimeters max min max A 1.86 1.96 0.073 0.077 B 3.10 3.30 0.122 0.130 C 0.46 0.56 0.018 0.022 D 0.50 BSC C E inches min P3 F A 0.020 BSC E 0.23 0.33 0.009 0.013 F 0.20 0.30 0.008 0.012 D B NOTES 1. Controlling dimension: millimeters. 06056.R3 3/11 Page 1 www.protekdevices.com 06056 DFN-16 PACKAGE Only One Name Means ProTek’Tion™ tape & reel specifications D t Top Cover Tape P2 Pin 1 10 Pitches Cumulative Tolerance on tape ± 0.2 E P0 A0 K0 F W B0 P User Direction of Feed specifications Reel Dia. Tape Width 178mm (7”) 12mm A0 B0 K0 D E 1.90 ± 0.10 4.30 ± 0.10 0.80 ± 0.10 1.50 ± 0.10 1.75 ± 0.10 F W P0 P2 P tmax 5.50 12.00 ± 0.30 4.00 ± 0.10 2.00 ± 0.05 4.00 ± 0.10 0.30 ± 0.05 Notes 1. Dimensions are in millimeters. 2. Surface mount product is taped and reeled in accordance with EIA-481. 3. Suffix - T73 = 7” Reel - 3,000 pieces per 8mm tape. 06056.R3 3/11 Page 2 www.protekdevices.com 06056 DFN-16 PACKAGE Only One Name Means ProTek’Tion™ company information COMPANY PROFILE ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specifically for the protection of electronic systems from the effects of lightning, Electrostatic Discharge (ESD), Nuclear Electromagnetic Pulse (NEMP), inductive switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide application specific protection solutions for all electronic equipment/systems. ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products. CONTACT US Corporate Headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By Telephone General: 602-431-8101 Sales: 602-414-5109 Customer Service: 602-414-5114 By Fax General: 602-431-2288 By E-mail: Sales: [email protected] Customer Service: [email protected] Technical Support: [email protected] Web www.protekdevices.com www.protekanalog.com COPYRIGHT © ProTek Devices 2005 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 06056.R3 3/11 Page 3 www.protekdevices.com