0406 Package - ProTek Devices

06023
0406 PACKAGE
Only One Name Means ProTek’Tion™
package outline & pad layout
outline dimensions
dim
millimeters
min
max
inches
min
max
A
0.56
0.022
B
0.86
0.034
C
0.98
E
F
0.038
1.53
0.058
0.127
0.003
0.15 SQ
1.47
G
H
1.02
0.006 SQ
0.15
0.076
I
0.040
0.060
0.006
0.406
0.005
0.016
Notes
1. Controlling dimensions in inches.
2. Decimal tolerance: .xxx ± 0.05mm (0.002”).
TOP
A
B C
SIDE
G
E
F
H
I
END
06023.R4 9/09
Page 1
www.protekdevices.com
06023
0406 PACKAGE
Only One Name Means ProTek’Tion™
package outline & pad layout
Option 1 - layout dimensions
millimeters
inches
nominal
nominal
A
0.51
0.020
C
0.30
0.012
D
0.46
0.018
E
0.20
0.008
F
0.15 SQ
0.006 SQ
G
0.71
0.028
H
0.99
0.039
I
0.51
0.020
dim
C
D
A
DIE
SOLDER
BUMPS
E
H G
I
Notes
1. Controlling dimensions in inches.
2. Decimal tolerance: .xxx ± 0.05mm (0.002”).
3. Preferred: Usign 0.1mm (0.004”) stencil.
F
SOLDER PADS
SOLDER PRINT
0.010” - 0.012” DIA.
COPPER CONTACTS
0.009”[0.23] DIA.
Option 2 - layout dimensions
millimeters
inches
nominal
nominal
A
0.51
0.020
F
0.15 SQ
0.006 SQ
G
0.71
0.028
H
0.99
0.039
I
0.51
0.020
dim
SOLDER MASK
A
DIE
SOLDER
BUMP
H G
Notes
I
1. Controlling dimensions in inches.
2. Decimal tolerance: .xxx ± 0.05mm (0.002”).
3. Preferred: Usign 0.1mm (0.004”) stencil.
F
SOLDER PRINT
0.014”[0.36] DIA.
06023.R4 9/09
Page 2
SOLDER MASK
www.protekdevices.com
06023
0406 PACKAGE
Only One Name Means ProTek’Tion™
tape & reel specifications
D
t
P2
Top Cover
Tape
10 Pitches Cumulative
Tolerance on tape ± 0.2
E
P0
A0
F
K0
W
B0
P
User Direction of Feed
specifications
Reel Dia.
Tape
Width
178(7”)
8
A0
B0
K0
D
E
W
P0
P2
P
0.80 ± 0.10 1.20 ± 0.10 0.70 ± 0.10 1.50 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 8.00 ± 0.20 4.00 ± 0.12 2.00 ± 0.05 2.00 ± 0.10
Notes
1.
2.
3.
4.
5.
F
tmax
0.25
tape & reel orientation
Dimensions in millimeters.
Top view of tape. Solder bumps are face down in tape package.
Orientation: preferred stencil - 0.1mm (0.004”).
Surface mount product is taped and reeled in accordance with EIA 481.
8mm plastic tape: 7” Reels - 5,000.
Triple Die - 0406
06023.R4 9/09
Page 3
www.protekdevices.com
06023
0406 PACKAGE
Only One Name Means ProTek’Tion™
company information
COMPANY PROFILE
ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specifically for
the protection of electronic systems from the effects of lightning, Electrostatic Discharge (ESD), Nuclear Electromagnetic Pulse (NEMP), inductive switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide
application specific protection solutions for all electronic equipment/systems.
ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products.
CONTACT US
Corporate Headquarters
2929 South Fair Lane
Tempe, Arizona 85282
USA
By Telephone
General: 602-431-8101
Sales: 602-414-5109
Customer Service: 602-414-5114
By Fax
General: 602-431-2288
By E-mail:
Sales: [email protected]
Customer Service: [email protected]
Technical Support: [email protected]
Web
www.protekdevices.com
www.protekanalog.com
COPYRIGHT © ProTek Devices 2000 - This literature is subject to all applicable copyright laws and is not for resale in any manner.
SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice.
DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering
and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of
its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special,
consequential or incidental damages.
LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory.
06023.R4 9/09
Page 4
www.protekdevices.com