SO-20WB Package Outline & Layout

06018
SO-20WB PACKAGE
Only One Name Means ProTek’Tion™
package outline & pad layout
-A-
outline dimensions
dim
millimeters
inches
min
max
min
max
A
12.60
13.00
0.496
0.512
B
7.40
7.60
0.292
0.299
C
2.35
2.65
0.093
0.104
D
0.35
0.49
0.014
0.019
F
0.50
0.90
0.020
0.035
G
1.27 BSC
11
20
-B-
1
0.05 BSC
0.25
0.32
0.010
0.012
K
0.10
0.25
0.004
0.008
P
10.05
10.55
0.395
0.415
-T-
R
0.25
0.50
0.010
0.019
20 PL
+ 0.010” (0.25mm)
10 PL
M B M
10
G
J
P
D
R X 45°
C
0° - 10°
K
+ 0.010” (0.25mm) M T B S A S
F
NOTES
1.
2.
3.
4.
5.
6.
-T- = Seating plane and datum surface.
Dimensions “A” and “B” are datum.
Dimensions “A” and “B” do not include mold protrusion.
Maximum mold protrusion is 0.015” (0.380mm) per side.
Dimensioning and tolerances per ANSI Y14.5M, 1982.
Dimensions are exclusive of mold flash and metal burrs.
A
pad layout dimensions
dim
millimeters
inches
min
max
min
max
A
1.14
1.40
0.045
0.055
B
0.64
0.89
0.025
0.035
C
10.67
-
0.420
-
D
8.13
8.38
0.320
0.330
E
1.02
1.27
0.040
0.050
NOTES
B
C
D
E
1. Controlling dimension: inches.
06018.R2 10/09
Page 1
www.protekdevices.com
J
06018
SO-20WB PACKAGE
Only One Name Means ProTek’Tion™
tape & reel specifications
10 Pitches Cumulative
Tolerance on tape ± 0.2
E
P2
P0
D
t
Pin 1
F
K0
W
B0
A0
P
User Direction of Feed
specifications
Reel Dia.
330mm (13”)
Tape
Width
A0
B0
K0
D
E
F
W
P0
P2
P
24mm 10.80 ± 0.10 13.30± 0.10 2.70 ± 0.10 1.50 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 24.00 ± 0.30 4.00 ± 0.12 2.00 ± 0.10 12.00 ± 0.10
tmax
0.25
Notes
1.
2.
3.
4.
Dimensions are in millimeters.
Surface mount product is taped and reeled in accordance with EIA-481.
Suffix - T13 = 13” Reel - 1,000 pieces per 24mm tape.
Bulk product shipped in tubes of 37 pieces per tube.
06018.R2 10/09
Page 2
www.protekdevices.com
06018
SO-20WB PACKAGE
Only One Name Means ProTek’Tion™
company information
COMPANY PROFILE
ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specifically for
the protection of electronic systems from the effects of lightning, Electrostatic Discharge (ESD), Nuclear Electromagnetic Pulse (NEMP), inductive switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide
application specific protection solutions for all electronic equipment/systems.
ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products.
CONTACT US
Corporate Headquarters
2929 South Fair Lane
Tempe, Arizona 85282
USA
By Telephone
General: 602-431-8101
Sales: 602-414-5109
Customer Service: 602-414-5114
By Fax
General: 602-431-2288
By E-mail:
Sales: [email protected]
Customer Service: [email protected]
Technical Support: [email protected]
Web
www.protekdevices.com
www.protekanalog.com
COPYRIGHT © ProTek Devices 1998 - This literature is subject to all applicable copyright laws and is not for resale in any manner.
SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice.
DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering
and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of
its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special,
consequential or incidental damages.
LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory.
06018.R2 10/09
Page 3
www.protekdevices.com