5 Bump Flip Chip Package

06055
5 BUMP FLIP CHIP PACKAGE
Only One Name Means ProTek’Tion™
package outline & pad layout
BOTTOM VIEW
A
outline dimensions
dim
millimeters
inches
min
max
min
max
A
0.914
1.016
0.036
0.040
B
1.285
1.375
0.0506
0.0541
C
0.495
0.505
0.0195
0.0199
D
0.245
0.255
0.0096
0.0100
E
0.430
0.440
0.0169
0.0173
F
0.430
0.440
0.0169
0.0173
G
0.180
0.280
0.0071
0.0110
H
0.180
0.280
0.0071
0.0110
I
0.432
0.559
0.017
0.022
J
0.330
0.457
0.013
0.018
G
C
SIDE VIEW
E
O
F
G
B
H
I
1
2
I
SOLDER BUMPS
D
Notes
J
1. Controlling dimensions in millimeters.
2. Solder bumps (63/67 Sn/Pb) 0.30 dia.
layout dimensions
dim
millimeters
A
inches
min
max
min
max
A
0.25
0.25
0.010
0.010
B
0.50
0.50
0.020
0.020
C
0.86
0.86
0.034
0.034
Non solder mask
defined pad 0.275mm
C
Notes
Solder mask opening
0.325mm
Solder stencil
opening 0.330mm
1. Controlling dimensions in millimeters
B
06055.R2 9/09
Page 1
www.protekdevices.com
06055
5 BUMP FLIP CHIP PACKAGE
Only One Name Means ProTek’Tion™
tape & reel specifications
D
t
P2
Top Cover
Tape
10 Pitches Cumulative
Tolerance on tape ± 0.2
E
P0
A0
F
K0
W
B0
Orientation Dot
P
User Direction of Feed
specifications
Reel Dia.
Tape
Width
A0
178(7”)
8
1.08±0.05
B0
K0
D
E
F
W
P0
P2
P
tmax
1.60±0.05 0.72 ± 0.05 1.50 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 8.00 ± 0.30 4.00 ± 0.10 2.00 ± 0.05 4.00 ± 0.10 0.20±0.025
Notes
1.
2.
3.
4.
Dimensions in millimeters.
Top view of tape. Solder bumps are face down in tape package.
Surface mount product is taped and reeled in accordance with EIA 481.
8mm plastic tape: 7” Reels - 3,000 pieces per reel.
06055.R2 9/09
Page 2
www.protekdevices.com
06055
5 BUMP FLIP CHIP PACKAGE
Only One Name Means ProTek’Tion™
company information
COMPANY PROFILE
ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specifically for
the protection of electronic systems from the effects of lightning, Electrostatic Discharge (ESD), Nuclear Electromagnetic Pulse (NEMP), inductive switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide
application specific protection solutions for all electronic equipment/systems.
ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products.
CONTACT US
Corporate Headquarters
2929 South Fair Lane
Tempe, Arizona 85282
USA
By Telephone
General: 602-431-8101
Sales: 602-414-5109
Customer Service: 602-414-5114
By Fax
General: 602-431-2288
By E-mail:
Sales: [email protected]
Customer Service: [email protected]
Technical Support: [email protected]
Web
www.protekdevices.com
www.protekanalog.com
COPYRIGHT © ProTek Devices 2007 - This literature is subject to all applicable copyright laws and is not for resale in any manner.
SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice.
DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering
and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of
its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special,
consequential or incidental damages.
LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory.
06055.R2 9/09
Page 3
www.protekdevices.com