06071 DFN-6 PACKAGE Only One Name Means ProTek’Tion™ package outline & pad layout outline dimensions dim A millimeters max min max 0.45 0.55 0.017 0.021 0.13 BSC E 0.005 BSC b 0.35 0.45 0.013 0.017 D 1.90 2.10 0.074 0.082 E 1.40 1.60 0.055 0.063 e BOTTOM VIEW inches min A3 L D 0.65 BSC 0.025 BSC L 0.45 0.55 0.017 0.021 L1 0.55 0.65 0.021 0.025 L2 0.65 0.75 0.025 0.029 L2 L1 TOP VIEW e A3 A b SIDE VIEW NOTEs 1. Controlling dimension: millimeters. 2. Dimensioning and tolerances per ANSI Y14.M, 1985. A C pad layout dimensions millimeters inches NOMINAL NOMINAL A 0.21 0.083 B 0.16 0.063 C 0.65 0.026 D 0.55 0.022 E 0.45 0.018 dim B E D NOTES 1. Controlling dimension: millimeters. 06071.R1 3/11 Page 1 www.protekdevices.com 06071 DFN-6 PACKAGE Only One Name Means ProTek’Tion™ tape & reel specifications D t Top Cover Tape P2 10 Pitches Cumulative Tolerance on tape ± 0.2 E P0 A0 F B0 K0 W Pin 1 P User Direction of Feed specifications Reel Dia. Tape Width 178mm (7”) 8mm A0 B0 K0 D E F W P0 P2 P 1.70 ± 0.10 2.20 ± 0.10 0.70 ± 0.10 1.50 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 8.00 ± 0.30 4.00 ± 0.10 2.00 ± 0.05 4.00 ± 0.10 tmax 0.25 Notes 1. Dimensions are in millimeters. 2. Surface mount product is taped and reeled in accordance with EIA-481. 3. Suffix - T73 = 7” Reel - 3,000 pieces per 8mm tape. 06071.R1 3/11 Page 2 www.protekdevices.com 06071 DFN-6 PACKAGE Only One Name Means ProTek’Tion™ company information COMPANY PROFILE ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specifically for the protection of electronic systems from the effects of lightning, Electrostatic Discharge (ESD), Nuclear Electromagnetic Pulse (NEMP), inductive switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide application specific protection solutions for all electronic equipment/systems. ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products. CONTACT US Corporate Headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By Telephone General: 602-431-8101 Sales: 602-414-5109 Customer Service: 602-414-5114 By Fax General: 602-431-2288 By E-mail: Sales: [email protected] Customer Service: [email protected] Technical Support: [email protected] Web www.protekdevices.com www.protekanalog.com COPYRIGHT © ProTek Devices 2009 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 06071.R1 3/11 Page 3 www.protekdevices.com