+Download Datasheet

05118
PSD03 - PSD36C
Only One Name Means ProTek’Tion™
HIGH POWERED TVS ARRAY
DESCRIPTION
The PSDxx and PSDxxC Series are transient voltage suppressor arrays designed for ESD protection of SMART phones,
laptop computers and other portable electronics. These silicon based diodes offer superior clamping voltage and
performance compared to other technologies such as MLVs.
The PSDxx and PSDxxC Series can be utilized as a single line protector in either a unidirectional or bidirectional configuration. The SOD-323 small package configuration offers designers the flexibility of placement on the printed circuit
board for each I/O port or voltage bus. The PSDxx and PSDxxC Series meets the IEC 61000-4-2 (ESD), 61000-4-4 (EFT)
and 61000-4-5 requirements.
SOD-323 PACKAGE
FEATURES
APPLICATIONS
• Compatible with IEC 61000-4-2 (ESD): Air - 15kV, Contact - 8kV
• Compatible with IEC 61000-4-4 (EFT): 40A - 5/50ns
• Compatible with IEC 61000-4-5 (Surge): 24A, 8/20µs Level 2(LineGnd) & Level 3 (Line-Line)
• Unidirectional: 500 Watts Peak Pulse Power per Line (tp = 8/20µs)
• Bidirectional: 400 Watts Peak Pulse Power per Line (tp = 8/20µs)
• Replacement for MLV (0805)
• Unidirectional & Bidirectional Configurations
• Protects One Power or I/O Port
• ESD Protection > 25kV
• Low Clamping Voltage
• Available in Multiple Voltages Ranging From 3V to 36V
• RoHS Compliant
• REACH Compliant
• Laptop Computers
• SMART Phones
• Portable Electronics
MECHANICAL CHARACTERISTICS
• Molded JEDEC SOD-323 Package
• Approximate Weight: 5 milligrams
• Lead-Free Pure-Tin Plating (Annealed)
• Solder Reflow Temperature:
Pure-Tin - Sn, 100: 260-270°C
• 8mm Tape and Reel Per EIA Standard 481
• Flammability Rating UL 94V-0
PIN CONFIGURATIONS
05118.R15 11/13
1
1
2
UNIDIRECTIONAL
2
BIDIRECTIONAL
Page 1
www.protekdevices.com
05118
PSD03 - PSD36C
Only One Name Means ProTek’Tion™
TYPICAL DEVICE CHARACTERISTICS
MAXIMUM RATINGS @ 25°C Unless Otherwise Specified
PARAMETER
SYMBOL
VALUE
UNITS
Unidirectional: Peak Pulse Power (tp = 8/20µs) - See Figure 1
PPP
500
Watts
Bidirectional: Peak Pulse Power (tp = 8/20µs) - See Figure 1
PPP
400
Watts
Operating Temperature
TL
-55 to 150
°C
TSTG
-55 to 150
°C
Storage Temperature
ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified
PART
NUMBER
(Note 1 )
DEVICE
MARKING
RATED
STAND-OFF
VOLTAGE
MINIMUM
BREAKDOWN
VOLTAGE
VWM
VOLTS
MAXIMUM
LEAKAGE
CURRENT
TYPICAL
CAPACITANCE
@ 1mA
V(BR)
VOLTS
MAXIMUM
CLAMPING
VOLTAGE
(Fig. 2)
@ IP = 1A
VC
VOLTS
@V WM
ID
µA
@0V, 1MHz
C
pF
PSD03
A
3.3
4.0
6.5
125
500
PSD03C
G
3.3
4.0
7.0
125
200
PSD05
B
5.0
6.0
9.8
10
350
PSD05C
H
5.0
6.0
9.8
10
175
PSD08
C
8.0
8.5
13.4
10
250
PSD08C
J
8.0
8.5
13.4
10
150
PSD12
D
12.0
13.3
19.0
1
150
PSD12C
K
12.0
13.3
19.0
1
50
PSD15
E
15.0
16.7
24.0
1
100
PSD15C
L
15.0
16.7
24.0
1
40
PSD18
18
18.0
20.0
29.0
1
90
PSD18C
N
18.0
20.0
29.0
1
40
PSD24
F
24.0
26.7
43.0
1
88
PSD24C
M
24.0
26.7
43.0
1
40
PSD36
R
36.0
40.0
60.0
1
75
PSD36C
T
36.0
40.0
60.0
1
35
NOTES
1. Part numbers with an additional “C” suffix are bidirectional devices, i.e., PSD05C.
05118.R15 11/13
Page 2
www.protekdevices.com
05118
PSD03 - PSD36C
Only One Name Means ProTek’Tion™
TYPICAL DEVICE CHARACTERISTICS
FIGURE 1
PEAK PULSE POWER VS PULSE TIME
PPP - Peak Pulse Power - Watts
10,000
1,000
500W, 8/20µs Waveform
400W, 8/20µs Waveform
100
10
0.1
10
100
td - Pulse Duration - µs
Peak Value IPP
80
100
TEST
WAVEFORM
PARAMETERS
tf = 8µs
td = 20µs
e-t
60
40
10,000
FIGURE 3
POWER DERATING CURVE
Peak Pulse Power
8/20µs
80
% Of Rated Power
tf
100
td = t/(IPP/2)
60
40
20
20
0
1,000
FIGURE 2
PULSE WAVE FORM
120
IPP - Peak Pulse Current - % of IPP
1
0
05118.R15 11/13
5
10
15
t - Time - µs
20
25
0
30
Page 3
Average Power
0
25
50
75 100 125
TA - Ambient Temperature - °C
150
www.protekdevices.com
05118
PSD03 - PSD36C
Only One Name Means ProTek’Tion™
TYPICAL DEVICE CHARACTERISTICS
FIGURE 4
OVERSHOOT & CLAMPING VOLTAGE FOR PSD03
35
5 Volts per Division
25
15
5
-5
ESD Test Pulse - 25 kilovolt, 1/30ns (Waveshape)
C - Capacitance - pF
400
300
200
100
0
05118.R15 11/13
0
1
2
3
4
VR - Reverse Voltage - Volts
Page 4
5
6
www.protekdevices.com
05118
PSD03 - PSD36C
Only One Name Means ProTek’Tion™
TYPICAL DEVICE CHARACTERISTICS
Current (I) - Amps
FIGURE 6
PSD03 FORWARD TLP
Leakage Current @ Pulse (I) - µA
Leakage Test Voltage = 0.5V
Voltage (V) - Volts
Current (I) - Amps
FIGURE 7
PSD03 REVERSE TLP
Leakage Current @ Pulse (I) - µA
Leakage Test Voltage = 0.5V
Voltage (V) - Volts
Note: Indicative TLP performance- for reference only
05118.R15 11/13
Page 5
www.protekdevices.com
05118
PSD03 - PSD36C
Only One Name Means ProTek’Tion™
TYPICAL DEVICE CHARACTERISTICS
Current (I) - Amps
FIGURE 8
PSD36 FORWARD TLP
Leakage Current @ Pulse (I) - µA
Leakage Test Voltage = 0.5V
Voltage (V) - Volts
Current (I) - Amps
FIGURE 9
PSD36 REVERSE TLP
Leakage Current @ Pulse (I) - µA
Leakage Test Voltage = 0.5V
Voltage (V) - Volts
Note: Indicative TLP performance- for reference only
05118.R15 11/13
Page 6
www.protekdevices.com
05118
PSD03 - PSD36C
Only One Name Means ProTek’Tion™
SPICE MODEL
FIGURE 1
SPICE MODEL FOR
ABD
ABD
ABD
Lg
0.55nH
Lg
0.5nH
UNIDIRECTIONAL
BIDIRECTIONAL
ABD - Avalanche Breakdown Diode (TVS)
Lg - Lead Inductance
TABLE 1 - SPICE PARAMETERS
PART NUMBER
05118.R15 11/13
PARAMETER
UNIT
ABD(TVS)
BV
V
See Table 2
IBV
µA
1
Cjo
pF
See Table 2
IS
A
See Table 2
Vj
V
0.6
M
-
0.33
N
-
1
RS
Ohms
See Table 2
TT
s
1E-8
EG
eV
1.11
TABLE 2 - ABD SPECIFIC SPICE PARAMETERS
I S (AMPS)
B V(VOLTS)
Cjo(pF)
Rs(OHMS)
PSD03
4.0
438
1E-11
0.21
PSD05
6.0
284
1E-11
0.14
PSD08
8.5
146
1E-11
0.28
PSD12
13.3
123
1E-13
0.40
PSD15
16.7
102
1E-13
0.52
PSD24
26.7
61
1E-13
1.54
PSD03C
4.5
219
1E-11
0.21
PSD05C
6.0
142
1E-11
0.14
PSD08C
8.5
73
1E-11
0.28
PSD12C
13.3
62
1E-13
0.40
PSD15C
16.7
51
1E-13
0.52
PSD24C
26.7
30
1E-13
1.54
Page 7
www.protekdevices.com
05118
PSD03 - PSD36C
Only One Name Means ProTek’Tion™
SOD-323 PACKAGE INFORMATION
OUTLINE DIMENSIONS
DIM
MILLIMETERS
C
INCHES
A
MIN
MAX
MIN
MAX
A
1.60
1.90
0.063
0.075
B
1.15
1.45
0.045
0.057
C
2.39
2.70
0.094
0.106
D
0.80
1.10
0.031
0.043
E
0.25
0.40
0.010
0.016
F
0.10
0.20
0.004
0.008
H
-
0.10
-
0.004
L
0.20
-
0.008
-
E
B
F
D
H
NOTES
1. Controlling dimension: millimeters.
2. Dimensioning and tolerances per ANSI Y14.5M, 1985.
3. Dimensions are exclusive of mold flash and metal burrs.
L
A
PAD LAYOUT DIMENSIONS
DIM
MILLIMETERS
INCHES
MIN
MAX
MIN
MAX
A
2.87
3.12
0.113
0.123
B
0.66
0.91
0.026
0.036
C
0.66
0.91
0.026
0.036
C
B
NOTES
1. Controlling dimension: millimeters.
05118.R15 11/13
Page 8
www.protekdevices.com
05118
PSD03 - PSD36C
Only One Name Means ProTek’Tion™
TAPE AND REEL
D
t
Top Cover
Tape
P2
P0
10 Pitches Cumulative
Tolerance on tape ± 0.2
E
A0
F
K0
W
B0
Pin 1 Indicated by Band
P
User Direction of Feed
SPECIFICATIONS
REEL DIA.
TAPE
WIDTH
178mm (7”)
8mm
A0
B0
K0
D
E
F
W
P0
P2
P
1.55 ± 0.10 2.90 ± 0.10 1.35 ± 0.10 1.50 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 8.00 ± 0.30 4.00 ± 0.10 2.00 ± 0.05 4.00 ± 0.10
tmax
0.25
NOTES
1.
2.
3.
4.
Dimensions are in millimeters.
Surface mount product is taped and reeled in accordance with EIA-481.
Suffix - T7 = 7” Reel - 3,000 pieces per 8mm tape.
Marking on Part - marking code (see page 2), polarity band (Unidirectional Only).
Package outline, pad layout and tape specifications per document number 06010.R4 9/10.
ORDERING INFORMATION
BASE PART NUMBER
(xx = Voltage)
LEADFREE SUFFIX
TAPE SUFFIX
QTY/REEL
REEL SIZE
TUBE QTY
PSDxx/PSDxxC
-LF
-T7
3,000
7”
n/a
This device is only available in a Lead-Free configuration.
05118.R15 11/13
Page 9
www.protekdevices.com
05118
PSD03 - PSD36C
Only One Name Means ProTek’Tion™
COMPANY INFORMATION
COMPANY PROFILE
In business more than 20 years, ProTek Devices™ is a privately held semiconductor company. The company offers a product line of overvoltage protection and overcurrent protection components. These include transient voltage suppressor array (TVS arrays) avalanche breakdown diode, steering
diode TVS array and electronics SMD chip fuses. These components deliver circuit protection in electronic systems from numerous overvoltage and
overcurrent events. They include lightning; electrostatic discharge (ESD); nuclear electromagnetic pulses (NEMP); inductive switching; and electromagnetic interference (EMI) / radio frequency interference (RFI). ProTek Devices also offers high performance interface and linear products. They
include analog switches; multiplexers; LED drivers; LED wafer die for ESD protection; audio control ICs; RF and related high frequency products.
CONTACT US
Corporate Headquarters
2929 South Fair Lane
Tempe, Arizona 85282
USA
By Telephone
General: 602-431-8101
Sales: & Marketing: 602-414-5109
Customer Service: 602-414-5114
Product Technical Support: 602-414-5107
By Fax
General: 602-431-2288
By E-mail:
Sales: [email protected]
Customer Service: [email protected]
Technical Support: [email protected]
ProTek Devices (Asia Pacific) Pte. Ltd.
8 Ubi Road 2, #06-19
Zervex
Singapore - 408538
Tel: +65-67488312
Fax: +65-67488313
Web
www.protekdevices.com
COPYRIGHT © ProTek Devices 2000 - This literature is subject to all applicable copyright laws and is not for resale in any manner.
SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice.
DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering
and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of
its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special,
consequential or incidental damages.
LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory.
05118.R15 11/13
Page 10
www.protekdevices.com