Pilkor components EMI Suppression film capacitors (RC unit) PCRC 420 MKP RADIAL POTTED CAPACITORS Pitch 15.0/17.5 mm P = 15.0 / 17.5mm QUICK REFERENCE DATA Potting & Encapsulation material Safety class 0.033, 0.047, 0.068, 0.1, 0.15, 0.22㎌ ±20% 22Ω, 47Ω, 120Ω ±10% 250 V~ 40/085/21 -40℃ ~ +85℃ IEC 60384-14 UL60384-14 & CSA E60384-14:09(cUL) VDE, EK Qualified in accordance with UL 94V-0 X2 FEATURES APPLICATIONS . 15.0mm, 17.5mm lead pitch . Supplied loose in box and taped in ammopack . Consist of a low-inductive wound cell of metalized polypropylene film and carbon composition resistor, potted in a flame retardant case . For X2 – electromagnetic Interference suppression . Spark quenching . Noise suppression Capacitance value Capacitance tolerance Resistance value Resistance tolerance Rated (AC) voltage 50 to 60 Hz Climatic category Temperature range Reference IEC specification Safety approvals • Please refer to caution and warning at http://www.pilkor.co.kr/download/Introductions.pdf before using these products. 147 Pilkor components EMI Suppression film capacitors (RC unit) PCRC 420 Ordering Information l l b h d1 h H lt P dt d2 PCRC 420 P0 X X XXX Type series code Resistance 1 22Ω 2 47Ω 3 120Ω Capacitance code Packing method Lead configuration C – tol, R - tol 12NC** 1 Loose in box lt = 4.0 ± 1.0mm C-tol ±20% & R-tol ±10% PCRC 420 x1xxx 2 Loose in box 20 < lt ≤ 25mm C-tol ±20% & R-tol ±10% PCRC 420 x2xxx 3 Ammopack H = 18.5 mm / P0=12.7mm C-tol ±20% & R-tol ±10% PCRC 420 x3xxx 4 Ammopack H = 18.5 mm / P0=15.0mm C-tol ±20% & R-tol ±10% PCRC 420 x4xxx ** Some values do not follow coding rule. 148 Pilkor components EMI Suppression film capacitors (RC unit) PCRC 420 SAFETY APPROVALS SAFETY APPROVALS Voltage Value File Number UL 60384-14 & CSA E60384-14:09(cUL) 250V(AC) 33nF to 220nF + 22Ω, 47Ω, 120Ω E165646 VDE 250V(AC) 33nF to 220nF + 22Ω, 47Ω, 120Ω 120831 EK 250V(AC) 33nF to 220nF + 22Ω, 47Ω, 120Ω SH03001-2004 Packaging Information SMALLEST PACKING QUANTITIES (SPQ) LOOSE IN BOX DIMENSIONS lt = 4 ± 1.0 mm 20 < lt ≤ 25 mm 8.5 x 15.0 x 18.0 10.0 x 17.5 x 18.0 1000 1000 1000 1000 8.0 x 17.0 x 22.0 9.0 x 17.5 x 22.0 10.5 x 18.5 x 22.0 1000 500 500 1000 500 500 149 Pilkor components EMI Suppression film capacitors (RC unit) PCRC 420 SPECIFIC REFERENCE DATA FOR 250 VAC Frequency at 1 khz Value ( Cap. + Res. ) Tangent of loss angle Resistance (Ω) Capacitance (µF) 0.033 ∼ 0.047 0.068 ∼ 0.1 0.15 ∼ 0.22 Rated voltage pulse slope (dV/dt)R 22 47 120 < 1.5% < 3% < 5% < 3% < 5% < 10% < 6% < 10% < 20% 100 V/μs R between leads, for all value 〉30 000 ㏁ Test voltage (DC) on line; 2250V, 1min Withstanding(AC) Voltage between leads and case 2400 V ; 1 min VRac = 250 V~ Cap. (㎌) Combination Resistance (Ω) CATALOGUE NUMBER PCRC 420 ..... loose in box bxhxl (mm) lt = 4.0 ± 1.0 mm 20 < lt ≤ 25 mm C – tol ; ± 20 % & R – tol ; ± 10 % Pitch = 15.0 ± 0.5 mm d1 = 0.8 +0.08/-0.05 mm, d2 = 0.7 +0.08/-0.05 mm 22 11333 12333 47 21333 22333 120 31333 32333 8.5 x 15.0 x 18.0 22 11473 12473 0.047 47 21473 22473 120 31473 32473 22 11683 12683 0.068 47 21683 22683 120 31683 32683 11.0 x 19.0 x 18.0 22 11A04 12A04 0.1 47 21A04 22A04 120 31A04 32A04 Pitch = 17.5 ± 0.5 mm d1 = 0.8 +0.08/-0.05 mm, d2 = 0.7 +0.08/-0.05 mm 22 11104 12104 0.1 8.0 x 17.0 x 22.0 47 21104 22104 120 31104 32104 22 11154 12154 0.15 9.0 x 17.5 x 22.0 47 21154 22154 120 31154 32154 22 11224 12224 0.22 10.5 x 18.5 x 22.0 47 21224 22224 120 31224 32224 Example : 68㎋ + 120Ω ( lt = 4 ±1.0 mm) Æ code number : PCRC 420 31683 0.033 150 Pilkor components EMI Suppression film capacitors (RC unit) PCRC 420 CONSTRUCTION MKP metallized polypropylene film Carbon resistor Lead wire 0.8Φ Lead wire 0.7Φ (tin-coated) (tin-coated) Metal spray layer MOUNTING NORMAL USE The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for mounting on printed-circuit boards by means of automatic insertion machines. For detailed specifications refer to chapter "PACKAGING". SPECIFIC METHOD OF MOUNTING TO WITHSTAND VIBRATION AND SHOCK In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the printed-circuit board. - For pitches of 15.0mm the capacitors shall be mechanically fixed by leads. - For pitches of 17.5mm the capacitors shall be mounted in the same way and the body clamped. SPACE REQUIREMENTS ON PRINTED-CIRCUIT BOARD The maximum length and width of film capacitors are shown in the following drawing ; b max = b + 0.3mm Eccentricity Imax = I +0.3 mm - Eccentricity as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned. - Product height with seating plane as given by IEC 60717 as reference : hmax ≤ h+0.3mm 151 Pilkor components EMI Suppression film capacitors (RC unit) PCRC 420 RATINGS AND CHARACTERISTICS Unless otherwise specified all electrical values apply to an ambient temperature of 23±1℃, an atmospheric pressure of 86 to 106KPa and a relative humidity 50±2%. For reference testing, a conditioning period shall be applied of 96±4 hours by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20%. CAPACITANCE - All capacitance values are specified at 1 kHz. (Vs. Temperature) Capacitance vs frequency 100 (nF) 10 1 0.1 102 103 104 105 106 107 108 f(Hz) - Capacitance at 25℃ (Vs. Frequency) , ex) 100nF+120Ω 2 △C/C (%) 1 0 -1 -2 -40 -20 0 20 40 60 80 100 Tamb(℃) 152 Pilkor components EMI Suppression film capacitors (RC unit) PCRC 420 TEMPERATURE - Storage temperature : Tstg = - 25 to + 40℃ with RH maximum 80% without condensation. VOLTAGE - Test voltage between leads, 100% on line for 1 second : for all value ; 2200V (DC) - Test voltage between interconnected leads and case (foil method) : 2050V (AC). DISSIPATION FACTOR The dissipation factor is measured at 1㎑ INSULATION RESISTANCE The insulation resistance is measured after a voltage of 100±15 V has been applied for 1 minute ±5 seconds at Tamb = 20℃. - R between leads for all value : > 30 000 ㏁. - R between interconnected leads and case (foil method) : > 30 000 ㏁. PRODUCT MARKING Capacitors are marked with following information; 1.Manufacturer (PILKOR) 2.Manufacturer's type designation (PCRC 420 ) 3.Rated capacitance 4.Rated (AC) voltage (250V~) 5.Sub class (X2) 6.Tolerance on rated capacitance M = ±20 % K = ±10 % 7.Climatic category (40/085/21) 8.Code for dielectric material (MKP) 9.Resistance value (Ω) 10.Year and week of manufacturing (e.g. WK1301) 11.Safety approvals Example of marking Pitch P = 15.0 / 17.5mm, all value 100n M + 120Ω K PCRC 420 250V~ X2 40/085/21 MKP PILKOR WK1401 Marking on the side 153