WPANT10018-CF 2.4 GHz Wi-Fi / Bluetooth Flex Antenna Description / Application This 2.4 GHz Flexible Antenna is very small and can be installed inside any wireless device with proper application support (needs to be integrated in a certain fashion). This Antenna can be soldered directly to the circuit board of a wireless device. We can assist your engineers to optimize mounting positions for these antennas in your specific application and can further assist to trouble shoot system integration issues such as TRP/TIS and FCC requirements. We specialize in developing customized Antenna solutions. Please contact [email protected] with your specific application requirements. Electrical Properties Operating Frequency Approximate Antenna Impedance [Ω] VSWR – Typical Peak Gain [dBi] (Typical) Efficiency [%] (Typical) Polarization Pattern 2.4 – 2.5 GHz 50Ω < 2:1 0.5 to 1 dBi ~ 40 % Linear Near Isotropic Mechanical / Environmental Properties Antenna Dimensions Antenna Color Operating / Storage Temperature Environmental Hazardous Materials Rev: 3.0 Created on: February 21, 2014 0.8’’ X 0.26’’ X 7.8 mils Green o (20mm X 6.7mm X 0.2mm) o -40 C to +90 C Meets standards for UL 94V-0 RoHS Compliant Created by: MKS Approved by: BP Page | 1 VSWR of the Antenna Rev: 3.0 Created on: February 21, 2014 Created by: MKS Approved by: BP Page | 2 Total Radiation Efficiency of the Antenna in % (including VSWR losses) Rev: 3.0 Created on: February 21, 2014 Created by: MKS Approved by: BP Page | 3 Peak Gain of the Antenna in dBi Rev: 3.0 Created on: February 21, 2014 Created by: MKS Approved by: BP Page | 4