WPANT10051-C1A 2.4 GHz Wi-Fi Horizontally Polarized Embedded Antenna Note: 3D Drawing shown. Description / Application This antenna has a very thin & sleek profile, and can easily be installed inside any wireless device. It has a Horizontally Polarized near-Omnidirectional radiation pattern. Good efficiency and ease of integration make this an ideal choice for applications where space is a constraint. We can assist your engineers to optimize mounting positions for these antennas in your specific application and can further assist to trouble shoot system integration issues such as TRP/TIS and FCC requirements. We specialize in developing customized Antenna solutions. Please contact [email protected] with your specific application requirements. Electrical Properties Operating Frequency* Approximate Antenna Impedance [Ω] VSWR – Typical* Peak Gain [dBi] (Typical)* Efficiency [%] (Typical)* Polarization Pattern 2.4 – 2.5 GHz 50Ω < 2:1 2.5 dBi 65 – 80 % Linear (Horizontal) Near Omni-directional *Note: These performance metrics were recorded with the Antenna installed on WPI test Evaluation Board. These Evaluation boards mimic the customer’s circuit board in general. The Antenna has enough bandwidth to accommodate for minor tuning issues when installed on the client’s actual circuit boards. In case of discrepancy, WPI engineers will assist the clients in designing proper matching circuit. Mechanical / Environmental Properties Antenna Dimensions Antenna Color Cable Connector Operating / Storage Temperature Environmental Hazardous Materials Rev: 3.0 Created on: February 24, 2014 2’’ X 0.55’’ X 0.031’’ Black (51mm X 14mm X 0.79mm) 60mm long 1.32mm dia micro-coax U.FL IPX / Hirose equivalent o o -40 C to +90 C Meets standards for UL 94V-0 RoHS Compliant Created by: MKS Approved by: BP Page | 1 Pictures of the Antenna (3D Drawings) Mounting Legs Note: There is no need for any additional Cables or Connectors. This eliminates the possibility of additional overhead for the Clients. Antenna is soldered directly in place on the Eval board. Rev: 3.0 Created on: February 24, 2014 Created by: MKS Approved by: BP Page | 2 Antenna Placement on a Circuit Board (62 mils thick FR4 WPI Evaluation Board) Rev: 3.0 Created on: February 24, 2014 Created by: MKS Approved by: BP Page | 3 Total Radiation Efficiency of the Antenna in % (including VSWR losses) Rev: 3.0 Created on: February 24, 2014 Created by: MKS Approved by: BP Page | 4 Peak Gain of the Antenna in dBi Rev: 3.0 Created on: February 24, 2014 Created by: MKS Approved by: BP Page | 5