AZ850 PCB signal relays 151 Microminiature - polarized relays. Monostable and bistable MONOSTABLE BISTABLE AZ850 microminiature - polarized relays • Monostable and bistable (latching) single coil and two coil versions available • DC coils: up to 48 V DC - monostable, up to 24 V DC - bistable • High sensitivity, 79 mW pick up • 2,54 mm pinning • Standard PC 0,1" grid terminal spacing • DIP terminal layout, fits 10 pin IC socket • Epoxy sealed for automatic wave soldering and cleaning • Meets FCC Part 68.302 1500 V lightning surge • UL, CUR-E43203 Contacts Contact number & arrangement Contact material Resistive load • max. switching power • max. switching current • max. switching voltage • rated load Rated current Resistance 2C/O DPDT (2 Form C) Bifurcated crossbar contacts AgPd/Au ❶ 30 W / 62,5 VA 1A 220 V DC ❷ UL: 1 A / 30 V DC 2A ≤ 50 mΩ initially 250 V AC 0,5 A / 125 V AC (resistive) Coil (Polarized) Rated voltage Must release voltage Power consumption Power at pickup voltage (typical value) DC DC Max. continuous dissipation Temperature rise at Un coil Temperature 3-5-6-9-12-24-48 V ❸ ≥ 0,1 Un monostable 0,1...0,3 W monostable 79-142 mW 56-84 mW bistable 1 coil 113-169 mW bistable 2 coils 0,875 W 20oC 18 oC max. 105 oC General data Electrical life: • AC1 • DC1 Mechanical life Operating time (typical value) at Un coil Release time (typical value) at Un coil Min. time of power supply impulse Capacitance Dielectric strength insulation (at sea level for 1 min.) Insulation resistance 25 oC, 500 V DC, 50% RH Dimensions (L x W x H) Weight Enclosure Terminals Ambient temperature • storing • operating (at Un coil) Cover protection category Shock resistance Vibration resistance Solder bath temperature Solvent temperature Immersion Time / Soldering time ❶ Min. current / voltage: 10 µA / 10 mV ❷ At switching voltage above 30 V DC, contact Relpol S.A. ❸ Bistable relays: coil voltage up to 24 V www.relpol.com.pl 105 0,5 A, 125 V AC 2 x 105 1 A, 30 V DC 108 2 ms monostable 2 ms bistable 1 ms monostable (with no coil suppression) 2 ms bistable 2 ms at Un coil bistable 0,4 pF contact to contact 0,2 pF between contact sets 0,9 pF contact to coil 1 250 Vrms contact to coil 1 000 Vrms contact to contact 1 000 Vrms between contact sets min. 1000 MΩ 14 x 9 x 5 mm 1,5 g LCP alloy Cu-Sn -40...+105 oC -40...+70 oC IP 67 50 g stable amplitude to 3,3 mm DA at 10...55 Hz max. 250 oC max. 80 oC max. 30 s / max. 5 s AZ850 152 PCB signal relays Microminiature - polarized relays. Monostable and bistable Notes: All values at 20 °C • Relays should not operate when the limit values are exceeded • Relay adjustment may be affected by undue pressure on relay case • Coil polarity is fixed • For complete insulation between the ralay's magnetic fields, it is recommended that 5,0 mm space be provided between adjacent relays • Bistable realys to be energized by pulse supply voltage only • Specifications subject to change without notice. www.relpol.com.pl AZ850 PCB signal relays Microminiature - polarized relays. Monostable and bistable Ordering codes See Coil data - Tables 1, 2, 3 www.relpol.com.pl 153