R2M Miniature plug-in power relays 103 • General purpose relays • Plug-in version - 35 mm DIN rail mount, EN 50022 • For PCB and soldering connections • Coil AC and DC Contacts Contact number & arrangement Contact material Max. switching voltage Min. switching voltage Rated load Min. switching current Rated current Max. breaking capacity Min. breaking capacity Resistance Max. operating frequency • at rated load • no load AC/DC AC1 DC1 AC1 AC1 2C/O AgNi, AgNi/Au 0,2 µm, AgSnO2 250 V / 250 V 5 V AgNi, 5 V AgNi/Au 0,2 µm, 10 V AgSnO2 5 A / 250 V AC 5 A / 24 V DC 5 mA AgNi, 5 mA AgNi/Au 0,2 µm, 10 mA AgSnO2 5A 1 250 VA 0,3 W AgNi, 0,3 W AgNi/Au 0,2 µm, 1 W AgSnO2 ≤ 100 mΩ 1 200 cycles/hour 36 000 cycles/hour Coil Rated voltage 50/60 Hz Must release voltage Operating range of supply voltage Rated power consumption AC DC AC DC 6...240 V 6...110 V ≥ 0,1 Un see Table 1, 2 1,2 VA 0,9 W Insulation Insulation category Insulation rated voltage Dielectric strength • coil - contact • contact - contact • pole - pole Contact - coil distance • clearance • creepage C250 400 V AC 2 000 V AC 1 000 V AC 2 000 V AC ≥ 3 mm ≥ 4 mm General data Operating time (typical value) Release time (typical value) Electrical life • resistive AC1 • cosφ Mechanical life (cycles) Dimensions (L x W x H) Weight Ambient temperature • storing • operating Cover protection category Shock resistance Vibration resistance Solder bath temperature Soldering time AC: 8 AC: 7 ms ms DC: 10 DC: 3 ms ms ≥ 2 x 105 5 A, 250 V AC see Fig. 2 ≥ 107 27,5 x 14 x 32,9 mm 22 g -40...+70 oC -40...+55 oC IP 40 10 g 5 g 10...150 Hz max. 270 oC max. 5 s Standard contact material marked with bolt type. Note: Relays with AgNi contacts can be used up to 5 A at resistive and inductive loads. www.relpol.com.pl R2M Miniature plug-in power relays 104 www.relpol.com.pl R2M Miniature plug-in power relays 105 Mounting Relays R2M are designed for: • screw terminals sockets GZ2 with clip GZ2 1060 and spring clamp GZ2 1111, 35 mm DIN rail mount, EN 50022 or on panel mounting • terminals sockets for PCB mounting S2M with clip G4 1050 • solder terminals sockets G2M with clip G4 1050 and spring clamp G2M 1020 • direct PCB mounting. www.relpol.com.pl R2M Miniature plug-in power relays 106 Contact material selection for different load types • AgNi - for resistive or inductive loads, • AgNi/Au 0,2 µm - contact surface protection against oxidation during storage, • AgSnO2 - for capacitive loads or bulb loads. see Table 1, 2 page 104 www.relpol.com.pl