NS-45/PI Inclinometer Inclinometer ± 45° Theory of Operation Applications • Zero point detection • Machine Tool Alignment • Level Control Advantages • IP 65 Housing • Low vibration sensitivity • High Precision 3 Pinout 6 7 5 2 +Ub GND Earth GNDx Output Analogue Ix Input digital RS232 Output digital RS232 7 Supply Voltage Ground Earth Ground for analogue current output signal Ix ≈ 20 mA (-45°) to ≈ 4 mA (+45°) RxD TxD Dimensions (mm) 60 40 1,5 5,5 3,5 1,5 90 75 Range: Percision (up to ± 30°): analogue: digital: Resolution: Temperature stability: Zero point: Sensitivity ( up to ± 30°): Analog Output: Analog current: (*) Digital Output: Transmission rate: Format: Operating temp. Range: Storage temp. Range: Supply voltage: Current consumption: Protection class: Connection: ± 45° ± 0.05° ± 0.05° 0.003° -3 < 2*10 °/K -3 < 5*10 °/K ≈ 20mA(-45°) to ≈ 4mA(+45°) RS-232 in degrees 2400 or 9600 Baud ASCII -25°C ... +85°C -40°C …+85°C + 7 ...+ 24VDC ca. 35 mA IP 65 Connector or Pigtail (*) Impedance: 40 4,3 25 All PI-type inclinometers are microprocessor controlled transducers capable of producing a linearized RS-232 digital and analog current output. With their machined, aluminum base plate and IP 65 housing, they are an ideal choice for a variety of industrial, automotive and aerospace applications. Specifications 6 1 1 2 3 4 5 4 The NS-45/PI single-axis inclinometer is a member of a family of high performance, competitively priced, single and dual-axis inclinometers. The heart of every HL Planartechnik inclinometer is a small, state-of-the-art, inclination sensor. The sensor, which is comprised of a molded, ceramic case bonded, via a glass sealing process, to a ceramic substrate with deposited thin film, platinum electrodes. The chamber is partially filled with electrolytic fluid and then hermetically sealed. The molded, ceramic, sensor housing combined with a precise, planar electrode geometry yields excellent performance and consistent part-to-part uniformity. Type NS-45/PI Standard version ZA<150 Ohm, Order-no. 200454102100 Type NS-45/PI-260 Special version ZA< 260 Ohm, Order-no. 200454108100 HL-Planartechnik GmbH Hauert 13, 44 227 Dortmund, Tel.: +49 (0) 231/97400, Fax.: +49 (0) 231/974020 Internet: http://www.hlplanar.com E-Mail: [email protected] Stand: 06.06.05 Design: Zn