NS-45/V Single Axis Inclinometer With Analog Voltage Output The NS-45/V single-axis inclinometer is a member of a family of high performance, competitively priced, single and dual-axis inclinometers. The heart of every HL Planartechnik inclinometer is a small, state-of-the-art, inclination sensor. The sensor, which is comprised of a molded, ceramic case bonded, via a glass sealing process, to a ceramic substrate. Thin film, platinum electrodes are deposited on the substrate. Then the chamber is partially filled with electrolytic fluid and hermetically sealed. The molded, ceramic, sensor housing combined with a precise, planar electrode geometry yields excellent performance and consistent part-to-part uniformity. Applications Advantages • Zero point detection • Wide range of application • Alignment and level • Low vibration control sensitivity • Angle • Low price measurement 3 Pinout 4 5 2 Diagram (angle vs. Output signal) 6 1 The V-type sensors have an internal pre-processor and produce a -/+2V analog output. They have a compact sturdy design and a whole range of uses are possible thanks to the possibility of many different external-switching combinations. With their machined, aluminium baseplate and IP 65 housing, they are an ideal choice for a variety of industrial, automotive and aerospace applications. 7 2,5 Output voltage in V around 2.5 V 2,0 1 +Ub Supply Voltage 1,5 2 GND Ground 1,0 3 Erde Earth 0,5 4 GNDx Ground for analogue output Ux 5 n.c. n.c. 6 Ux Voltage output Ux 7 n.c. n.c. Angle in ° 0,0 -50 -40 -30 -20 0 10 20 30 40 50 -0,5 -1,0 -1,5 -2,0 -2,5 Dimensions (mm) Specifications 60 40 1,5 5,5 3,5 1,5 90 75 60 4,3 45 -10 Range: Precision: Resolution: Temperature stability: Zero point: Sensitivity: Analog Output: Operating temp. Range: Storage temp. Range: Supply voltage: Current consumption: Protection class: Connection: ± 45° +/- 0.5° 0.001° 0.1° for 0°C ... +50°C 0.3° for 0°C ... +50°C -2V (-45°) to +2V (+45°) 0°C ... +70°C -40°C …+85°C +12 ... +24 VDC ~ 9mA IP 65 Connector or Pigtail HL-Planartechnik GmbH Hauert 13, D - 44 227 Dortmund, Tel.: +49 (0) 231/97400, Fax.: +49 (0) 231/974020 Internet: http://www.hlplanar.com E-Mail: [email protected] Stand: 28.01.03 Design: Zn