NS-45/P2 Dual Axis Inclinometer The NS-45/P2 dual-axis inclinometer is a member of a family of high performance, competitively priced, single and dual-axis inclinometers. The heart of every HL Planartechnik inclinometer is a small, state-of-the-art, inclination sensor. The sensor, which is comprised of a molded, ceramic case bonded, via a glass sealing process, to a ceramic substrate. Thin film, platinum electrodes are deposited on the substrate. Then the chamber is partially filled with electrolytic fluid and hermetically sealed. Applications Advantages • Zero point detection • Wide range of application • Aligning and level • Low vibration control sensitivity • Angle • Higher Precision measurement Pinout 3 4 6 1 7 Supply Voltage Ground Earth n.c. n.c. RxD Specifications TxD 60 Dimensions (mm) 40 1,5 5,5 3,5 1,5 90 75 45 4,3 Range: Percision: digital: Resolution: Temperature stability: Zero point: Sensitivity (up to ±30°): Output signal: Digital RS 232 Transmission rate: Format: Operating temp. Range: Storage temp. Range: Supply voltage: Current consumption: Protection class: Connection: ± 45° ±0.05° 0.003° -3 < 2*10 °/K -3 < 5*10 °/K In degrees 2400 or 9600 Baud ASCII -25°C ... +85°C -40°C …+85°C + 7 ...+ 24VDC ca. 35 mA IP 65 Connector or Pigtail 60 7 +Ub GND Earth n.c. n.c. Input digital RS232 Output digital RS232 All dual axis P-type inclinometers are microprocessor controlled transducers capable of producing a linearized RS-232 digital output. With their machined, aluminum baseplate and IP 65 housing, they are an ideal choice for a variety of industrial, automotive and aerospace applications. . 5 2 1 2 3 4 5 6 The molded, ceramic, sensor housing combined with a precise, planar electrode geometry yields excellent performance and consistent part-to-part uniformity. HL-Planartechnik GmbH Hauert 13, D - 44 227 Dortmund, Tel.: +49 (0) 231/97400, Fax.: +49 (0) 231/974020 Internet: http://www.hlplanar.com E-Mail: [email protected] Stand: 19.02.03 Design: Zn