TFS90D

Filename: tfs 90d.doc
Version 1.2
VI TELEFILTER
04.01.2007
Filter specification
TFS 90D
1/5
Measurement condition
Ambient temperature:
Input power level:
Terminating impedance: *
Input:
Output:
25
0
°C
dBm
155 Ω || -55,5 pF
200 Ω || -40,3 pF
Characteristics
Remark:
The reference level for the relative attenuation arel of the TFS 90D is the minimum of the pass band attenuation. This value is defined as the insertion loss
ae. The nominal frequency fN is fixed at 90,0 MHz without any tolerance. The values of relative attenuation arel are guaranteed for the whole operating
temperature range. The frequency shift of the filter in the operating temperature range is included in the production tolerance scheme.
Data
typ. value
Insertion loss
(reference level)
ae
7,7
Nominal frequency
fN
-
dB
PB
Passband
p-p
Pass band ripple
tolerance / limit
max.
fN
±
10,0
dB
90,0
MHz
1,025 MHz
0,2
dB
max.
1,0
dB
0,2
0,25
dB
dB
max.
max.
0,5
1,0
dB
dB
55
48
dB
dB
min.
min.
40
40
dB
dB
20
ns
max.
300
ns
arel
Relative attenuation
fN
fN
±
0,3
… fN
MHz … fN
±
±
fN
fN
+
89,7
4,5
MHz … fN
MHz … fN
+
0,3
MHz
1,025 MHz
4,5
410
MHz
MHz
Group delay ripple within PB
Operating temperature range
OTR
Storage temperature range
Temperature coefficient of frequency
TCf **
-
- 20 °C ... + 70 °C
-
- 40 °C ... + 85 °C
-18
ppm/K
-
*) The terminating impedances depend on parasitics and q-values of matching elements and the board used, and are to be understood as reference values
only. Should there be additional questions do not hesitate to ask for an application note or contact our design team.
**) ∆f(Hz) = TCf(ppm/K) x (T-T0) x fTo(MHz)
Generated:
Checked / Approved:
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: tfs 90d.doc
Version 1.2
VI TELEFILTER
04.01.2007
Filter specification
TFS 90D
2/5
0
3.01
-1
2.77
-12
-2
2.53
-18
-3
2.29
-24
-4
2.05
-5
1.81
-6
1.57
-42
-7
1.33
-48
-8
1.09
-54
-9
0.85
-30
-36
-60
70
74
78
82
86
90
frequency in MHz
94
98
102
106
-10
88
110
88.4
88.8
89.2
89.6
90
90.4
frequency in MHz
90.8
91.2
91.6
delay in µs
0
-6
magnitude in dB
magnitude in dB
Filter characteristic
0.61
92
Construction and pin connection
(All dimensions in mm)
10
+0,20
6,50 - 0,10
6
TFS 90D
●
V01
Date code
1,02
2,31
1
5
+0,20
19 - 0,10
2,0 Max.
1
1,91
7,62
1
2
3
4
5
6
7
8
9
10
Input RF Return
Ground
Ground
Ground
Output
Output RF Return
Ground
Ground
Ground
Input
Date code:
V
W
X
...
Year + week
2007
2008
2009
50 Ohm Test circuit
L1
10
1
5
SAW
L2
6
C2
C1
2, 3, 4, 7, 8, 9
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: tfs 90d.doc
Version 1.2
VI TELEFILTER
04.01.2007
Filter specification
TFS 90D
3/5
Stability characteristics, reliability
After the following tests the filter shall meet the whole specification:
1. Shock:
500g, 1 ms, half sine wave, 3 shocks each plane;
DIN IEC 68 T2 - 27
2. Vibration:
10 Hz to 500 Hz, 0,35 mm or 5 g respectively, 1 octave per min, 10 cycles per plan, 3 plans;
DIN IEC 68 T2 - 6
3. Change of
temperature:
4. Resistance to
solder heat (reflow):
-55 °C to 125°C / 30 min. each / 10 cycles
DIN IEC 68 part 2 – 14 Test N
reflow possible: three times max.;
for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4;
This filter is RoHS compliant (2002/95/EG, 2005/618/EG)
Packing
Tape & Reel:
IEC 286 – 3, with exception of value for N and minimum bending radius;
tape type II, embossed carrier tape with top cover tape on the upper side;
max. pieces of filters per reel:
reel of empty components at start:
reel of empty components at start including leader:
trailer:
Pull Off Direction
Po
Date Code
P1
P2
Ao
Ct
Bo
So
Do
E
t
Ko
W
Tape (all dimensions in mm)
W
: 32,00 ± 0,3
Po
: 4,00 ± 0,1
Do
: 1,50 +0,1/-0
E
: 1,75 ± 0,1
F
: 14,20 ± 0,1
P2
: 2,00 ± 0,1
P1
: 12,00 ± 0,1
D1(min)
: 2,00
Ao
: 7,10 ± 0,1
Bo
: 19,60 ± 0,1
So
: 28,40 ± 0,1
Ct
: 25,5 ± 0,1
2000
min. 300 mm
min. 500 mm
min. 300 mm
Type
Reel (all dimensions in mm)
A
: 330
W1
: 32,4 +2/-0
W2(max) : 38,4
N(min)
: 100
C
: 13,0 +0,5/-0,2
PIN Marker
D1
W2
C
A
N
W1
The minimum bending radius is 45 mm.
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: tfs 90d.doc
Version 1.2
VI TELEFILTER
04.01.2007
Filter specification
TFS 90D
4/5
Air reflow temperature conditions
Conditions
Average ramp-up rate (30°C to 217°C)
> 100°C
> 150°C
> 217°C
Peak temperature
Time within 5°C of actual peak temperature
Cool-down rate (Peak to 50°C)
Time from 30°C to Peak temperature
Exposure
less than 3°C/second
between 300 and 600 seconds
between 240 and 500 seconds
between 30 and 150 seconds
max. 260°C
between 10 and 30 seconds
less than 6°C/second
no greater than 300 seconds
Chip-mount air reflow profile
Temperature / °C
max. 260°C
217°C
max. 300 s
10 ... 30 s
Time / s
30 ... 150 s
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: tfs 90d.doc
VI TELEFILTER
Version 1.2
Filter specification
04.01.2007
TFS 90D
5/5
History
Version
Reason of Changes
Name
Date
1.0
- Generation of development specification
Strehl
20.09.2006
1.1
- Change relative attenuation
Strehl
28.09.2006
1.2
- terminating impedances, typical values, filter characteristics and matching configuration added
Pfeiffer
04.01.2007
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.