UNISONIC TECHNOLOGIES CO., LTD U2429 CMOS IC SERIAL DATA CONTROL DUAL ELECTRONIC VOLUME DESCRIPTION The UTC U2429 is a dual channel electronic volume controlled with 2-wire serial data. The built-in reference circuit can compose of an electronic volume with less external parts. DIP-8 FEATURES SOP-8 * Built-in reference circuit * Control with serial data Volume 0 ~ -83dB (1dB/step), -∞ (Independent control is allowed in each channel) * Low noise and low distortion VNO = 5µVrms (ATT = -∞) THD = 0.01% Typ. (V0 = 0.5Vrms) ORDERING INFORMATION Ordering Number Lead Free U2429L-D08-T - Halogen Free U2429G-D08-T U2429G-S08-R Package Packing DIP-8 SOP-8 Tube Tape Reel MARKING DIP-8 www.unisonic.com.tw Copyright © 2015 Unisonic Technologies Co., Ltd SOP-8 1 of 6 QW-R502-031.C U2429 CMOS IC PIN CONFIGURATION PIN DESCRIPTION PIN NO 1 2 3 4 5 6 7 8 PIN NAME VIN 1 VOUT1 GND DATA CLOCK VCC VOUT2 VIN2 DESCRIPTION 1-ch input pin 1-ch output pin Ground pin Control data input pin. Inputs data in synchronization with clock. Clock input pin for transferring serial data. Power supply pin. Stabilize the pin with decoupling capacitor. 2-ch output pin 1-ch input pin BLOCK DIAGRAM UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 6 QW-R502-031.C U2429 CMOS IC ABSOLUTE MAXIMUM RATING PARAMETER SYMBOL VCC, VDD RATINGS UNIT 6.0 V SOP-8 440 mW Power Dissipation PD DIP-8 625 mW Junction Temperature TJ 125 °C Operating Temperature TOPR -20 ~ +85 °C Storage Temperature TSTG -40 ~ +150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. Supply Voltage RECOMMENDED OPERATING CONDITIONS PARAMETER Supply voltage range Rated supply voltage Output noise voltage Total harmonic distortion Channel separation UNIT V V SYMBOL ICC ATT ATT VIM VOM VNO1 VNO2 THD CS TEST CONDITIONS ATT=-∞ ATT=0 THD=1%, ATT=-6dB THD=1% ATT=0, Rg=0 ATT=-∞, Rg=0 f=1kHz, VO=0.5Vrms, ATT=0 f=1kHz MIN -2.0 1.5 0.8 TYP 8 -90 0 1.7 1.3 4 5 0.01 -80 MAX 16 -80 2.0 10 10 0.05 -70 UNIT mA dB dB Vrms Vrms μVrms μVrms % dB DC CHARACTERISTICS OF DIGITAL BLOCK PARAMETER "L" level input voltage "H" level input voltage "L" level input current "H" level input current RATINGS 4.5 ~ 5.5 5 ELECTRICAL CHARACTERISTICS (VCC = 5V, TA= 25°C, unless otherwise noted) PARAMETER Circuit current Maximum attenuation Attenuation error Maximum input voltage Maximum output voltage SYMBOL VCC VCC SYMBOL VIL VIH IIL IIH TEST CONDITIONS Data, clock pin VI=0 VI=5V Data, clock pin MIN 0 0.8×VCC -10 TYP MAX UNIT 0.2×VCC V VCC V 10 μA 10 μA AC CHARACTERISTICS OF DIGITAL BLOCK PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT Cycle time of clock tcr VDD=5V 4 μs Pulse width of clock ("H" level) tWHC VDD=5V 1.6 μs Pulse width of clock ("L" level) tWLC VDD=5V 1.6 μs Clock rising time tr VDD=5V 0.4 μs Clock falling time tf VDD=5V 0.4 μs Data setup time tSD VDD=5V 0.8 μs Data hold time tHD VDD=5V 0.8 μs Note: UTC products on power start, DATA conversion or IC first start are all without delay time. When DATA reading is completed, the output immediately respond. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 6 QW-R502-031.C U2429 CMOS IC RELATIONSHIP BETWEEN DATA AND CLOCK CLOCK DATA D0 D1 D2 D3 Reads data signal at the rising edge of clock signal SYSTEM CONFIGURATION UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 of 6 QW-R502-031.C U2429 CMOS IC CLOCK AND DATA TIMING DATA INPUT FORMAT UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 6 QW-R502-031.C U2429 CMOS IC VOLUME CODE ATT1 0dB -4dB -8dB -12dB -16dB -20dB -24dB -28dB -32dB -36dB -40dB -44dB -48dB -52dB -56dB -60dB -64dB -68dB -72dB -76dB -80dB D2 H L H L H L H L H L H L H L H L H L H L H L D3 L L H H L L H H L L H H L L H H L L H H L L D4 H H L L L L H H H H L L L L H H H H L L L L D5 L L L L L L H H H H H H H H L L L L L L L L D6 H H H H H H L L L L L L L L L L L L L L L L ATT2 0dB -1dB -2dB -3dB D7 H L H L D8 H H L L UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 6 of 6 QW-R502-031.C