Discontinuation Notice ! 31.12.2012 30.06.2012 AZ832 on tin ue d AZ830 Discontinuation date: Date of last order: Recommended replacement: POLARIZED DIP RELAY SINGLE SIDE STABLE FEATURES • • • • • • • • • • Low profile for compact board spacing DC coils to 48 VDC High sensitivity, 100 mW pickup Meets FCC Part 68.302 1500 V lightning surge Meets FCC Part 68.304 1000 V dielectric Life expectancy to 100 million operations High switching capacity, 60 W, 125 VA Fits standard 16 pin IC socket Epoxy sealed UL file E43203 (UL1950); CSA file LR 88413 Life Expectancy Mechanical Electrical Minimum operations 1 x 108 1 x 105 at 2 A, 30 VDC or 1 A, 125 VAC 2 x 106 at 1 A, 30 VDC or .5 A, 125 VAC (see table for additional figures) Operate Time (typical) 3 ms at nominal coil voltage DPDT (2 Form C) Bifurcated crossbar contacts Release Time (typical) 2 ms at nominal coil voltage (with no coil suppression) Resistive load: Capacitance Contact to contact: 1.0 pF Contact set to contact: 1.0 pF Contact to coil: 2.0 pF Bounce (typical) At 10 mA contact current 1.5 ms at operate N.O. side 2.5 ms at operate N.C. side Dielectric Strength (at sea level) 1500 Vrms contact to coil 1000 Vrms between contact sets 1000 Vrms across contacts Meets FCC Part 68.302 lightning surge Meets FCC Part 68.304 V dielectric Insulation Resistance 1000 megohms min. at 20°C, 500 VDC, 50% RH Dropout Greater than 10% of nominal coil voltage Ambient Temperature Operating At nominal coil voltage Standard: -40°C (-40°F) to 70°C (158°F) Sensitive: -40°C (-40°F) to 85°C (185°F) Both: -40°C (-40°F) to 105°C (221°F) CONTACTS Arrangement Ratings Max. Max. Max. Max. Rated Load UL Material Resistance COIL Power GENERAL DATA switched power: 60 W or 125 VA switched current: 2 A switched voltage: 250 VDC or 300 VAC carry current: 3A 2 A at 30 VDC 1 A at 120 VAC Silver alloy, gold clad. Silver palladium, gold clad available upon request (not recommended for current greater than 1 Amp). < 50 milliohms initially Standard coil: 200 mW Sensitive coil: 100 mW Max. Continuous Dissipation 1.0 W at 20°C (68°F) 0.9 W at 40°C (104°F) Vibration 0.062" (1.5 mm) DA at 10–55 Hz Temperature Rise Standard: 38°C (68°F) at nominal coil voltage Sensitive: 21°C (38°F) at nominal coil voltage Shock 40 g Enclosure P.B.T. polyester Terminals Tinned copper alloy, P.C. Max. Solder Temp. 270°C (518°F) Max. Solder Time 5 seconds Max. Solvent Temp. 80°C (176°F) Max. Immersion Time 30 seconds Weight 5 grams sc At Pickup Voltage (typical) Temperature Max. 115°C (239°F) NOTES All values at 20°C (68°F). Relay may pull in with less than “Must Operate” value. Relay has fixed coil polarity. For complete isolation between the relay’s magnetic fields, it is recommended that a .197" (5.0 mm) space be provided between adjacent relays. 5. Relay adjustment may be affected if undue pressure is exerted on relay case. 6. Specifications subject to change without notice. Di 1. 2. 3. 4. ZETTLER Storage electronics GmbH Junkersstrasse 3, D-82178 Puchheim, Germany Tel. +49 89 800 97 0 [email protected] Discontinuation Notice Discontinuation date: Date of last order: Recommended replacement: ! AZ830 TYPICAL CONTACT LIFE EXPECTANCY on tin ue d RELAY ORDERING DATA NUMBER OF OPERATIONS STANDARD COIL COIL SPECIFICATIONS Nominal Max. Coil Must Coil Continuous Resistance Operate ORDER NUMBER* VDC VDC ± 10% VDC 5 7.5 62.5 3.5 AZ830–2C–5DE 6 9.0 12 18.0 24 36.0 48 72.0 90 4.2 AZ830–2C–6DE 360 8.4 AZ830–2C–12DE 1440 16.8 AZ830–2C–24DE 5760 33.6 AZ830–2C–48DE 125 3.5 AZ830–2C–5DSE 180 4.2 AZ830–2C–6DSE 720 8.4 AZ830–2C–12DSE SENSITIVE RELAYS 5 11.0 6 13.0 12 26.0 24 53.0 48 106.0 2880 16.8 AZ830–2C–24DSE 11520 33.6 AZ830–2C–48DSE * Add suffix “R” to indicate reversed polarity. VOLTAGE POWER 50 mV 30 VDC 30 VDC 30 VDC 60 VDC 60 VDC 60 VDC 30 VAC 30 VAC 30 VAC 60 VAC 60 VAC 60 VAC 125 VAC 125 VAC 125 VAC 50 µW 60 W 40 W 20 W 60 W 40 W 20 W 120 VA 80 VA 40 VA 120 VA 80 VA 40 VA 125 VA 80 VA 40 VA .788 (20.0) .044 (1.1) REF 0.03 DIA (0.8) (8 HOLES) .015 (0.38) .386 (9.8) .200 (5.07) .300 (7.61) INDUCTIVE LOAD 5 x 107 15 x 104 3 x 105 1 x 106 — — — 15 x 104 3 x 105 1 x 106 15 x 104 3 x 105 1 x 106 15 x 104 3 x 105 1 x 106 .200 (5.07) (.024 ± .005) (0.6 ± 0.13) TYP Maximum Switching Capacity .044 (1.1) REF .044 (1.1) RESISTIVE LOAD 5x 107 5 x 105 1 x 106 3 x 106 5 x 105 1 x 106 3 x 106 5 x 105 1 x 106 3 x 106 5 x 105 1 x 106 3 x 106 5 x 105 1 x 106 3 x 106 NOTES: 1. Relays operated at nominal coil voltage. 2. Inductive load tests are at 0.7 power factor. 3. Table represents typical life figures and are not guaranteed minimums. MECHANICAL DATA .138 (3.5) 31.12.2012 30.06.2012 AZ832 9.0 8.0 7.0 6.0 5.0 4.0 3.0 0.1 (2.54) .390 (9.9) + 1 4 6 2.0 .9 .8 .7 .6 .5 8 .4 .3 – 16 .012 ± .005 (0.3 ± 0.13) TYP 13 11 9 .2 sc Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" Coil Temperature Rise Di ZETTLER electronics GmbH Junkersstrasse 3, D-82178 Puchheim, Germany Tel. +49 89 800 97 0 [email protected]