AZ699 on tin ue d ! SENSITIVE SUBMINIATURE RELAY FEATURES • • • • • • • • • • Extremely small (5mm) 6 Amp switching capability High sensitivity, 83 mW pickup Dielectric strength 4000 Vrms contact to coil Coils up to 48 VDC Epoxy sealed Clearance greater than 6 mm Creepage greater than 8 mm UL, CUR file E43203 VDE file 40020124 CONTACTS GENERAL DATA Arrangement SPST (1 Form A) SPDT (1 Form C) Ratings Resistive load: Max. switched power: 150 W or 1500 VA Max. switched current: 6 A Max. switched voltage: 300 VDC* or 400 VAC Life Expectancy Mechanical Electrical Minimum operations 1 X 107 operations 1 X 105 at 5 A, 250 VAC Operate Time (typical) 5 ms at nominal coil voltage Release Time (typical) 3 ms at nominal coil voltage (with no coil suppression) * Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. Rated Load UL, CUR VDE Material Resistance COIL Insulation Resistance 100 megohms min. at 20°C, 500 VDC, 50% RH Silver tin oxide, gold plating available Dropout Greater than 5% of nominal coil voltage < 100 milliohms initially (AgSnO2) < 30 milliohms initially (AgSnO2, gold plated) Ambient Temperature Operating Storage At nominal coil voltage -40°C (-40°F) to 85°C (158°F) -40°C (-40°F) to 105°C (221°F) Vibration 5 g at 10–500 Hz Shock 10 g Enclosure P.B.T. polyester 94V-0 6 A at 250 VAC resistive sc Power 6 A at 250 VAC resistive Dielectric Strength 1000 Vrms between open contacts (at sea level for 1 min.) 4000 Vrms contact to coil 6000 V surge, contact to coil At Pickup Voltage (typical) 83 mW Terminals Tinned copper alloy, P.C. Max. Continuous Dissipation 0.9 W at 20°C (68°F) ambient Max. Solder Temp. 260°C (500°F) Max. Solder Time 5 seconds Temperature Rise 20°C (36°F) at nominal coil voltage Max. Solvent Temp. 80°C (176°F) Max. Immersion Time 30 seconds Weight 6 grams Packing unit in pcs 20 per plastic tube / 1000 per carton box Temperature Max. 105°C (221°F) Di NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Minimum permissible contact load: AgSnO2 contact: 100 mA at 12 VDC AgSnO2 contact with gold plating: 10 mA at 5 VDC 4. Specifications subject to change without notice. ZETTLER electronics GmbH Junkersstrasse 3, D-82178 Puchheim, Germany Tel. +49 89 800 97 0 Fax +49 89 800 97 200 [email protected] www.ZETTLERelectronics.com 2007-05-24 AZ699 ! RELAY ORDERING DATA COIL SPECIFICATIONS 12 24 ORDER NUMBER* Must Operate VDC 3.5 Max. Continuous VDC 11.2 Coil Resistance Ôhm ± 10% 147 AgSnO2 Contact AZ699–1C–5DE 8.4 16.8 AgSnO2 with Gold Plated Contact AZ699–1C–5DEA 26.8 848 AZ699–1C–12DE AZ699–1C–12DEA 53.7 3,390 AZ699–1C–24DE AZ699–1C–24DEA on tin ue d Nominal Coil VDC 5 48 33.6 100.0 10,600 (±15%) AZ699–1C–48DE AZ699–1C–48DEA *Substitute “1A” for “1C” to indicate 1 Form A contacts. Add suffix “H” at the end of order number for horizontal mounting. MECHANICAL DATA sc Di Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" ZETTLER electronics GmbH Junkersstrasse 3, D-82178 Puchheim, Germany Tel. +49 89 800 97 0 Fax +49 89 800 97 200 [email protected] www.ZETTLERelectronics.com 2007-05-24