AZ832P POLARIZED DIP RELAY BISTABLE (LATCHING) FEATURES • • • • • • • • • • High sensitivity, 42 mW pickup Low profile DIP package Meets FCC Part 68.302 1500 V lightning surge Meets FCC Part 68.304 1000 V dielectric Single and dual coil versions DC coils to 24 VDC High switching capacity, 60 W, 250 VA Fits standard 16 pin IC socket Epoxy sealed UL, CUR file E43203 CONTACTS GENERAL DATA Arrangement DPDT (2 Form C) Bifurcated crossbar contacts Ratings Resistive load: Life Expectancy Mechanical Electrical Minimum operations 2 x 107 1 x 105 at 2 A, 30 VDC or 1 A, 125 VAC 2 x 106 at 1 A, 30 VDC or .5 A, 125 VAC Max. switched power: 60 W or 250 VA Max. switched current: 5 A Max. switched voltage: 250 VDC or 250 VAC Set Time (typical) 3 ms at nominal coil voltage Reset Time (typical) 3 ms at nominal coil voltage *Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. Bounce (typical) 3 ms Dielectric Strength (at sea level) 1500 Vrms contact to coil 1000 Vrms between contact sets 1000 Vrms across contacts Meets FCC Part 68.302 lightning surge Meets FCC Part 68.304 V dielectric Insulation Resistance 1000 megohms min. at 20°C, 500 VDC, 50% RH Ambient Temperature Operating Storage At nominal coil voltage -40°C (-40°F) to 85°C (185°F) -40°C (-40°F) to 105°C (221°F) Vibration 50 g at 10–500 Hz Rated Load UL Material Resistance 2 A at 25 VDC resistive 1 A at 120 VAC resistive Gold plated silver against palladium silver. Gold plated palladium silver against palladium silver (Suffix “A”) < 50 milliohms initially COIL Power Shock 50 g At Pickup Voltage (typical) Standard coil: 128 mW Sensitive coil: 96 mW Enclosure P.B.T. polyester Max. Continuous Dissipation 0.9 W at 20°C (68°F) Terminals Tinned copper alloy, P.C. Max. Solder Temp. 270°C (518°F) Max. Solder Time 5 seconds Max. Solvent Temp. 80°C (176°F) Max. Immersion Time 30 seconds Weight 5 grams Temperature Max. 115°C (239°F) NOTES 1. 2. 3. 4. All values at 20°C (68°F). Relay may pull in with less than “Must Operate” value. Relay has fixed coil polarity. For complete isolation between the relay’s magnetic fields, it is recommended that a .197" (5.0 mm) space be provided between adjacent relays. 5. Relay adjustment may be affected if undue pressure is exerted on relay case. 6. Specifications subject to change without notice. ZETTLER electronics GmbH Junkersstrasse 3, D-82178 Puchheim, Germany Tel. +49 89 800 97 0 Fax +49 89 800 97 200 [email protected] www.ZETTLERelectronics.com 2003-04-29 AZ832P RELAY ORDERING DATA STANDARD SINGLE COIL COIL SPECIFICATIONS Nominal Coil VDC 3 Max. Continuous VDC 9.0 Coil Resistance ± 10% 90 Set Reset VDC 2.25 ORDER NUMBER* AZ832P1-2C-3DE 5 15.0 250 3.75 AZ832P1–2C–5DE 12 36.0 1,440 9.0 AZ832P1–2C–12DE 24 60.0 4,000 18.0 AZ832P1–2C–24DE SENSITIVE SINGLE COIL 3 10.4 120 2.25 AZ832P1-2C-3DSE 5 17.2 330 3.75 AZ832P1–2C–5DSE 12 41.6 1,920 9.0 AZ832P1–2C–12DSE 24 83.1 7,680 18.0 AZ832P1–2C–24DSE STANDARD DUAL COIL COIL SPECIFICATIONS Nominal Coil VDC 3 Max. Continuous VDC 6.4 Coil Resistance ± 10% 45 Set Reset VDC 2.25 ORDER NUMBER* AZ832P2-2C-3DE 5 10.6 125 3.75 AZ832P2–2C–5DE 12 25.5 720 9.0 AZ832P2–2C–12DE 24 42.8 2,040 18.0 AZ832P2–2C–24DE SENSITIVE DUAL COIL 3 7.3 60 2.25 AZ832P2-2C-3DSE 5 12.3 167 3.75 AZ832P2–2C–5DSE 12 29.4 960 9.0 AZ832P2–2C–12DSE 24 58.8 3,840 18.0 AZ832P2–2C–24DSE *Add suffix “A” for gold plated palladium silver against palladium silver contact material. MECHANICAL DATA PC BOARD LAYOUT MECHANICAL DATA TWO COIL VERSION .048 [1.21] .394 MAX. [10.00] .795 MAX. [20.20] 1 .026 [0.66] .118 [3.00] .048 [1.21] 10 x ø.039 [ø1.0] 10x .012±.005 [0.30±0.12] 10x .024±.005 [0.61±0.12] SINGLE COIL LATCHING 4 6 8 6 8 13 11 9 3 x .200 [5.08] WIRING DIAGRAM + 4 .300 [7.62] 16 15 TWO COIL LATCHING 1 2 2 .419 MAX. [10.65] WIRING DIAGRAM + .047 [1.19] .100 [2.54] NOTE: 1 4 6 8 16 13 11 9 + DIAGRAMS SHOW THE "RESET" POSITION BEFORE ENERGIZED - 16 15 SET - WITH POLARITY AS SHOWN 13 11 9 RESET (WATCH FOR POLARITY) (WATCH FOR POLARITY) Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" ZETTLER electronics GmbH Junkersstrasse 3, D-82178 Puchheim, Germany Tel. +49 89 800 97 0 Fax +49 89 800 97 200 [email protected] www.ZETTLERelectronics.com 2003-04-29