Discontinuation Notice 31.12.2014 30.06.2014 AZ9481 ! AZ948 Discontinuation date: Date of last order: Recommended replacement: on tin ue d 16 AMP LOW PROFILE POWER RELAY FEATURES • • • • • • • High power switching (4000 VA) High sensitivity, 128 mW pickup Low profile (less than .5" height) SPST (1 Form A) Epoxy sealed version available DC coils up to 100 VDC UL file E44211 CONTACTS GENERAL DATA Arrangement SPST (1 Form A) Ratings Heavy Duty Resistive load: Max. switched power: 480 W, 4000 VA Max. switched current: 16 A Max. switched voltage: 125 VDC* or 250 VAC * Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. Rated Load UL Material Resistance COIL 10 A at 30 VDC, 100k cycles 16 A at 277 VAC, 100k cycles 1/ 10 HP at 125 VAC, 250 VAC or 277 VAC, 100k cycles Life Expectancy Mechanical Electrical Minimum operations 1 x 107 1 x 105 at 16 A 250 VAC Res. Operate Time (typical) 10 ms at nominal coil voltage Release Time (typical) 4 ms at nominal coil voltage (with no coil suppression) Dielectric Strength 1500 Vrms coil to contact (at sea level for 1 min.) 1000 Vrms contact to contact Insulation Resistance 100 megohms min. at 20°C, 500 VDC, 50% RH Dropout Greater than 10% of nominal coil voltage 100 V coil 6 VDC Ambient Temperature Operating At nominal coil voltage -40°C (-40°F) to 70°C (158°F) 3-48 V coils -40°C (-40°F) to 60°C (140°F) 100 V coil Silver tin oxide < 50 milliohms initially Storage -40°C (-40°F) to 105°C (221°F) Vibration 0.062" (1.5 mm) DA at 10–55 Hz Shock 10 g Enclosure P.B.T. polyester Terminals Tinned copper alloy, P.C. Max. Solder Temp. 270°C (518°F) Max. Solder Time 5 seconds Max. Solvent Temp. 80°C (176°F) Max. Immersion Time 30 seconds 2. Relay may pull in with less than “Must Operate” value. Weight 8 grams 3. Specifications subject to change without notice. Packing unit in pcs 20 per plastic tube / 1000 per carton box 128 mW sc Power At Pickup Voltage (typical) Max. Continuous Dissipation 1.8 W at 20°C (68°F) Temperature Rise 16°C (29°F) at nominal coil voltage Temperature Max. 115°C (239°F) NOTES Di 1. All values at 20°C (68°F). ZETTLER electronics GmbH Junkersstrasse 3, D-82178 Puchheim, Germany Tel. +49 89 800 97 0 Fax +49 89 800 97 200 [email protected] www.ZETTLERelectronics.com 2006-12-13 Discontinuation Notice Discontinuation date: Date of last order: Recommended replacement: AZ948 ! RELAY ORDERING DATA 31.12.2014 30.06.2014 AZ9481 on tin ue d COIL SPECIFICATIONS – Standard Coil Nominal Coil VDC 5 Must Operate VDC 4.0 6 9 12 24 48 100 Max. Continuous VDC 15.0 Coil Resistance Ohm ± 10% 125 ORDER NUMBER* AZ948–1AET–5D 4.8 18.0 180 7.2 27.0 405 AZ948–1AET–6D AZ948–1AET–9D 9.6 36.0 720 AZ948–1AET–12D 19.2 72.0 2,880 AZ948–1AET–24D 38.4 144.0 11,520 AZ948–1AET–48D 48.0 180.0 18,000 AZ948–1AET–100D *Add suffix “E” for epoxy sealed version. MECHANICAL DATA PC BOARD LAYOUT .866 (22.0) .700 (17.78) .630 (16.0) 2 .035 (.9) 2 places 1 .500 (12.7) .015 .413 (0.4) (10.5) 3 .051 (1.3) 2 places .157 (4.0) 4 .400 (10.16) Viewed toward terminals 2 WIRING DIAGRAM 1 sc COM .500 (12.7) 3 4 NO 2 1 .400 (10.16) COM 3 NO 4 Viewed toward terminals Di Dimensions in inches with metric equivalents in parentheses. Tolerance: ±0.010" ZETTLER electronics GmbH Junkersstrasse 3, D-82178 Puchheim, Germany Tel. +49 89 800 97 0 Fax +49 89 800 97 200 [email protected] www.ZETTLERelectronics.com 2006-12-13 on tin ue d ! AZ948 Di ZETTLER sc electronics GmbH Junkersstrasse 3, D-82178 Puchheim, Germany Tel. +49 89 800 97 0 Fax +49 89 800 97 200 [email protected] www.ZETTLERelectronics.com 2006-12-13