SSF212X100-14G Compact Horizontal Stainless Steel Floatswitch 1/2” NPT External Fitting Stainless Steel External Mount (1/2” NPT) N/O or N/C switching action o Operating Temp up to 120 C G1/4 thread for attaching junction box The SSF212 series are externally mounted float switches via 1/2NPT thread. This particular version has a G1/4 thread at the cable entry to enable attachment of a suitable junction box. The switches can be fitted to a tank without requiring access to the inside of the tank, as they are screwed in from the outside. The float switch can be fitted to achieve either N/O (make on rise) or N/C (make on fall) switching action by simply rotating through 180º when fitting. Technical Specification Mounting style Mounting thread Float/Stem material Maximum Temperature Maximum Pressure Float SG Minimum Fluid SG External 1/2” NPT 316/304 grade 120 oC 10 bar 0.7 0.75 Cable length - standard Cable size Cable conductor material Cable sheath material Cable temperature rating Sealing gasket Tightening torque for fixing Electrical Specification Contact Form 100cm 17/0.10 - A WG22 Tinned copper XLPE 125 oC N/A 2.0kg/cm N/O or N/C Switching Power Max. VA 50 Switching Current Max. Switching Voltage Max AC Switching Voltage Max DC A V 0.5 300 V 350 All ratings are for resistive load only. Leadouts 100cm XLPE wires Cynergy3 Part SSF212X100-14G Mechanical Dimensions (mm) 94 47 21.5 24 8 15 é17 x47 12.7 é17 ON 15ë Cynergy3 Components Ltd. 7 Cobham Road Ferndown Industrial Estate Wimborne, Dorset BH21 7PE Telephone +44 (0) 1202 897969 24 Hex Email:[email protected] ISO 9001C E R T I F IED www.cynergy3.com © 2014 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.