SH-5 series ANSI 150RF Flange mount SPDT switch 1 ½”, 2” & 3” x ANSI 150RF Flange mount SS 316L float material SS 304 other wetted parts material Available in direct switching version for use at up to 100ºC or low power switching at up to 200ºC Aluminium enclosure with screw on lid and cable gland Technical Specification The SH-5 series are ANSI 150RF flange mount float operated level switches. This design uses a pivoted float arm with a magnet on the inboard end. This magnet when moved by the rising float arm interacts with another magnet in the switch enclosure to give a snap action operation. Two switching options are available using either microswitches or reed switches, for different switching power and operating temperature ranges. There are also two float sizes available of either 150x50mm or 150x41mm. Mechanical Dimensions in mm SH-5052 250 Mounting style Float material Maximum Temperature Maximum pressure Float SG Minimum fluid SG External via flange 316L grade SS 100ºC / 200ºC 10 bar 0.55 or 0.65 0.60 or 0.70 Electrical Specification Contact Form Switching Voltage AC Max V Switching Voltage DC Max V Switching Current Max A SH-5052/SH-5051 SPDT 250 120 5 1 ½”, 2” & 3” 150lb SS 304 ½”BSP IP65 Not supplied SH-5052RH/SH-5151RH SPDT 400 400 1 All ratings are for resistive load only. RH version should be limited to maximum power 60VA Standard Parts Material SH-5052 SH-5052RH SS 316L/304 SS 316L/304 SS 316L/304 SS 316L/304 SS 316L/304 SS 316L/304 SH-5151 SH-5151RH SH-5653 SH-5653RH Max Current Temperature Range Min SG 5 0 - 100ºC 0.60 1 0 - 200ºC 0.60 5 0 - 100ºC 0.70 1 0 - 200ºC 0.70 5 0- 100ºC 0.40 1 0 - 200ºC 0.40 Mount 1 ½” 1 ½” 2” 2” 3” 3” Other flange types and pressure ratings may be possible. Please contact Cynergy3 with your requirements. 17.5 70 (112 for RH) SH-5151 19.1 70 (112 for RH) 250 150 150 Ø75 Ø127 Ø41 Flange size Flange rating Other wetted parts Cable entry Enclosure rating Sealing gasket Ø75 Ø50 14 14 1-1/2” 150lb flange Ø152 2” 150lb flange ½”BSP ½”BSP 23.9 230 70 120 Cynergy3 Components Ltd. 7 Cobham Road Ferndown Industrial Estate Wimborne, Dorset BH21 7PE Telephone +44 (0) 1202 897969 Email:[email protected] ISO9001 C E R T I F I E D Ø75 Ø75 14 3" 150lb flange Ø190 ½”BSP www.cynergy3.com © 2012 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.