product details QTI 1X26-120/220-240 Product description: EAN/ Product: Quantity: QTI 1X26-120/220-240 4008321040893 Unpacked (UNV) contains 1 Piece (PCE) You can find this product in the eCatalog: http://catalog.myosram.com?~language=EN&~country=US&it_p=4008321040893 Applications Dimmable No IP code IP20 General Description Design / version ECG multiwatt SEG no. 7980268 Standards acc. to EN 55015, CISPR 15 | acc. to EN 61547 | acc. to EN 61000-3-2 Energy Label - EEI A2 Technical - Electrical Data Operating frequency 42...65 kHz Mains frequency 50-60 Hz TH full width at half maximum 210 µs Lamp wattage 120 W Power factor c 0.98 ... 0.99 Nominal voltage 220-240 V DC voltage 176...254 V Max. no. of ECGs on circuit breaker 10A 17 Max. no. of ECGs on circuit breaker 16A 28 Technical - Geometries Mounting hole spacing, length 169 mm Width 88 mm Height 39 mm Length 163 mm Technical - Temperatures Max. casing temp. in case of fault 75 °C Max. operating temp. at the Tc point 70 °C Ambient temperature range -20...+50 °C Storage temperature -40...85 °C Relative humidity 5...85 % 1) Packaging units EAN Packaging type and content Dimensions in h x w x l Gross weight Volume 4008321040893 Unpacked contains 1 Piece 88,000 mm x 38,000 mm x 162,000 mm 352,000 g (0,000 g) 0,542 Cubic dec. 4008321040909 Shipping carton box contains 6 Piece 180,000 mm x 105,000 mm x 280,000 mm 2.326,000 g (0,000 g) 5,292 Cubic dec. 1) max. 56 d/y at 85% product details QTI 1X26-120/220-240 Lampenverdrahtung / Lamp wiring: Max. zulässige Leitungslänge zwischen EVG und Lampe: 2,0 m (PIN 1; 2); 1,0 m (PIN 3; 4) Max. permissible cable length between ECG and lamp 2.0 m (PIN 1; 2); 1.0 m (PIN 3; 4)