product details QT-FC 1x55/230-240 S Product description: Product code: Quantity: QT-FC 1x55/230-240 S 4050300526096 Unpacked (UNV) contains 1 Piece (PCE) You can find this product in the eCatalog: http://catalog.myosram.com?~language=EN&~country=COM&it_p=4050300526096 Applications Suitable f. fixtures with prot. class class I and class II Dimmable No Certificates & Standards Approval marks - approval ENEC 10 | VDE | VDE-EMC EEI - Energy Label A2 Standards acc. to EN 61347-2-3 | acc. to EN 60929 | acc. to EN 55015:2006 + A1:2007 | acc. to EN 61000-3-2 | acc. to EN 61547 General Description Design / version ECG standard Logistical Data Product weight 271.500 g Relative humidity 5...85 % 1) Temperature range at storage -40...85 °C Technical - Electrical Data Inrush current 28 A Nominal voltage 230-240 V Mains frequency 50 Hz DC voltage 154...276 V Operating frequency 40...50 kHz Dielectric strength 300 V | 320 V | 350 V 2) Max. no. of ECGs on circuit breaker 10 A 8 Max. no. of ECGs on circuit breaker 16 A 13 TH full width at half maximum 230 µs Technical - Geometries Cable cross-section, input side 0.5...1.5 mm² Length 123.00 mm Width 79.00 mm Height 33.00 mm Mounting hole spacing, length 129.5 mm Mounting hole spacing, width 67 mm Wire preparation length, input side 8.5...9.5 mm Wire preparation length, output side 8.5...9.5 mm Technical - Light Technical Data Rated starting time warm start Technical - Temperatures Ambient temperature range -20...+50 °C Operating temperature 70 °C Max. casing temp. in case of fault 110 °C 01.04.2011 Subject to change without notice. Errors and omission excepted. © 2011 OSRAM GmbH Page 1 of 3 product details QT-FC 1x55/230-240 S Packaging units Product code Packaging type and content Dimensions in h x w x l Gross weight Volume 4050300526096 Unpacked contains 1 Piece 79,000 mm x 33,000 mm x 123,000 mm 218,571 g (0,000 g) 0,326 Cubic dec. 4050300526102 Shipping carton box contains 20 Piece 275,000 mm x 95,000 mm x 425,000 mm 4.771,857 g (0,000 g) 11,103 Cubic dec. General • For ECGs for operating FC 22 W and 40 W see QUICKTRONIC PROFESSIONAL QTP-M, -D/E, -T/E for CFL OSRAM DULUX D/E, T/E • Supply voltage: 230 - 240 V • Line frequency: 0, 50 - 60 Hz • Line voltage: 198 - 254 V • Suitable for use in emergency lighting systems as per EN 50172/DIN VDE 0108-100 • Same luminous flux with direct and alternating current • The battery voltage may drop to 176 V. Ignition must take place above 198 V • Lamp start: Start within 1.5 s with optimum filament preheating • Automatic safety shutdown of lamps in the event of a defect or at end of life (EoL) • Automatic restart of replacement lamps • Energy Efficiency Index EEI=A2 • Approval marks: VDE Sign EMV Sign • Additional features: Cut off Sign EoL • Safety: to EN 61347-2-3 • Lamp operation: to EN 60929 • RI suppression: to EN 55015:2006+A1:2007/CISPR 15 • Line harmonics: to EN 61000-3-2 • Immunity: to EN 61547 1) Maximum 56 days/year at 85 % 2) Permanent | 48 h | 2 h 01.04.2011 Subject to change without notice. Errors and omission excepted. © 2011 OSRAM GmbH Page 2 of 3 product details QT-FC 1x55/230-240 S Lampenverdrahtung / Lamp wiring: Max. zulässige Leitungslänge zwischen EVG und Lampe: 2,0 m (PIN 1;2); 1,0 m (PIN 3;4) Max. permitted cable length in between ECG and lamp: 2.0 m (PIN 1;2); 1.0 m (PIN 3;4) 01.04.2011 Subject to change without notice. Errors and omission excepted. © 2011 OSRAM GmbH Page 3 of 3