SAW filters for infrastructure systems

SAW filters for infrastructure systems
Series/Type:
B3607
The following products presented in this data sheet are being withdrawn.
Ordering Code
Substitute Product
Date of Withdrawal
B39141B3607Z510
B39141B5093Z510
2011-04-01
Deadline Last
Orders
2011-06-30
Last Shipments
2011-09-30
For further information please contact your nearest EPCOS sales office, which will also support you in selecting a
suitable substitute. The addresses of our worldwide sales network are presented at www.epcos.com/sales.
 EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information
contained therein without EPCOS' prior express consent is prohibited.
EPCOS AG is a TDK Group Company.
SAW Components
B3607
Low-Loss Filter
140,00 MHz
Data Sheet
Ceramic package QCC12
Features
● High performance IF bandpass filter
● Constant group delay
● Hermetically sealed ceramic package
Terminals
● Gold plated
Dimensions in mm, approx. weight 0,4 g
Pin configuration
11
1
5
7
2, 6, 8, 12
3, 9
4, 10
Input
Input - ground
Output
Output - ground
Case - ground
Shield - ground
To be grounded
Type
Ordering code
B3607
B39141-B3607-Z510
Marking and Package
according to
C61157-A7-A55
Packing
according to
F61074-V8163-Z000
Electrostatic Sensitive Device (ESD)
Maximum ratings
Operable temperature range
Storage temperature range
DC voltage
Source power
T
Tstg
VDC
Ps
– 40/+ 85
– 40/+ 85
0
10
2
˚C
˚C
V
dBm
source impedance 50 Ω
Nov 29, 2002
SAW Components
B3607
Low-Loss Filter
140,00 MHz
Data Sheet
Characteristics
Operating temperature:
Terminating source impedance:
Terminating load impedance:
Group delay aperture
T = 25 ˚C
ZS = 50 Ω and matching circuit
ZL = 50 Ω and matching circuit
200 kHz
min.
Center frequency
(Center between 6dB points)
Insertion attenuation at fC
fC
Amplitude ripple (p-p)
∆α
αC
137,50 ... 142,50 MHz
139,75
typ.
140,00
max.
140,25 MHz
—
6,0
7,5
dB
—
0,7
1,0
dB
—
5
∆ϕ
Phase ripple (p-p)
137,50 ... 142,50 MHz
10
˚
Pass bandwidth
αrel ≤ 1 dB
αrel ≤ 3 dB
αrel ≤ 40 dB
B1dB
B3dB
B40dB
Relative attenuation (relative to αC)
αrel
100,00 ... 134,00 MHz
146,00 ... 180,00 MHz
5,8
6,9
—
6,1
7,1
10,5
—
—
11,1
MHz
MHz
MHz
40
40
47
46
—
—
dB
dB
—
µs
ns
τC
—
Group delay ripple (p-p)
∆τ
137,50 ... 142,50 MHz
—
80
150
—
– 87
—
Group delay at fC
TCf
Temperature coefficient of frequency
1,35
Matching circuit:
Note: Component values depend upon PCB layout
LP1 = 47 nH
LS2 = 27 nH
LS3 = 39 nH
LP4 = 68 nH
3
Nov 29, 2002
ppm/K
SAW Components
B3607
Low-Loss Filter
140,00 MHz
Data Sheet
Normalized frequency response
Normalized frequency response
4
Nov 29, 2002
SAW Components
B3607
Low-Loss Filter
140,00 MHz
Data Sheet
Attachment
1) Pyroelectric pulse amplitude < 50 mV.
5
Nov 29, 2002
SAW Components
B3607
Low-Loss Filter
140,00 MHz
Data Sheet
Published by EPCOS AG
Surface Acoustic Wave Components Division, SAW MC IS
P.O. Box 80 17 09, 81617 Munich, GERMANY
 EPCOS AG 2002. Reproduction, publication and dissemination of this brochure and the information contained therein without EPCOS’ prior express consent is prohibited.
Purchase orders are subject to the General Conditions for the Supply of Products and Services of
the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic
Manufacturers’ Association), unless otherwise agreed.
This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or
the international Representatives.
Due to technical requirements components may contain dangerous substances. For information on
the type in question please also contact one of our Sales Offices.
6
Nov 29, 2002