E M C C o m p o n e n t s February 2015 Common Mode Filters For power line ACP Series ACP3225 Type ACP3225 [1210 inch]* * Dimensions Code JIS[EIA] (2/8) E M C C o m p o n e n t s REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using these products. REMINDERS The storage period is less than 6 months. Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RH or less). If the storage period elapses, the soldering of the terminal electrodes may deteriorate. Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature does not exceed 150°C. Soldering corrections after mounting should be within the range of the conditions determined in the specifications. If overheated, a short circuit, performance deterioration, or lifespan shortening may occur. When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions. Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal design. Carefully lay out the coil for the circuit board design of the non-magnetic shield type. A malfunction may occur due to magnetic interference. Use a wrist band to discharge static electricity in your body through the grounding wire. Do not expose the products to magnets or magnetic fields. Do not use for a purpose outside of the contents regulated in the delivery specifications. The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth in the each catalog, please contact us. (1) Aerospace/Aviation equipment (2) Transportation equipment (cars, electric trains, ships, etc.) (3) Medical equipment (4) Power-generation control equipment (5) Atomic energy-related equipment (6) Seabed equipment (7) Transportation control equipment (8) Public information-processing equipment (9) Military equipment (10) Electric heating apparatus, burning equipment (11) Disaster prevention/crime prevention equipment (12) Safety equipment (13) Other applications that are not considered general-purpose applications When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing protection circuit/device or providing backup circuits in your equipment. 20150203 / cmf_commercial_power_acp3225_en.fm (3/8) E M C C o m p o n e n t s Common Mode Filters Product compatible with RoHS directive Halogen-free Compatible with lead-free solders For power line Overview of ACP3225 Type FEATURES Chip type common mode filter for DC power supply lines. Can reduce power consumption and improve EMC suppression because of low direct current resistance and excellent common mode impedance. Compatible with high-density portable devices, which are always being made smaller and lighter, because the height has been reduced. APPLICATION Power line noise countermeasure for various electronic equipment. Noise countermeasure for AC adapter lines and battery lines for note book PCs, portable game machines, and mobile phones. PART NUMBER CONSTRUCTION ACP Series name 3225 - L×W×H Dimensions (mm) 3225 3.2×2.5×1.9 102 - Impedance (:) at 100MHz 102 1000 2P - T Number of lines 2P 2 lines Packaging style T TL - □□□ Internal code ø180mm reel ø330mm reel OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT Temperature range Type ACP3225 Operating temperature （°C） Storage temperature （°C） –40 to +85 –40 to +85 Reel diameter Package quantity Individual weight （mm） ø180 ø330 (pieces/reel) 1,000 5,000 （g） 60 The Storage temperature range is for after the circuit board is mounted. RoHS Directive Compliant Product: See the following for more details related to RoHS Directive compliant products. http://product.tdk.com/en/environment/rohs/ Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150203 / cmf_commercial_power_acp3225_en.fm (4/8) E M C C o m p o n e n t s ACP3225 Type RECOMMENDED REFLOW PROFILE Preheating Soldering Natural cooling Peak T: Temperature T4 T3 T2 T3 t3 T1 t1 t2 t: Time Preheating Temp. T1 T2 150°C 180°C Time t1 60 to 120s Soldering Temp. Time T3 t2 230°C 10 to 30s Peak Temp. T4 245°C Time t3 5s max. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150203 / cmf_commercial_power_acp3225_en.fm (5/8) E M C C o m p o n e n t s ACP3225 Type SHAPE & DIMENSIONS (0.4) 1.9±0.1 3.2±0.2 (1.9) (0.3) (0.65) (0.3) (0.9) 2.5±0.2 (0.3) (0.3) (0.65) Dimensions in mm 0.9 1.9 CIRCUIT DIAGRAM 0.9 0.75 0.4 RECOMMENDED LAND PATTERN 1 4 2 3 0.4 • No polarity Dimensions in mm Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150203 / cmf_commercial_power_acp3225_en.fm (6/8) E M C C o m p o n e n t s ACP3225 Type ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE Common mode impedance [at 100MHz] (: ) 1000 500 Tolerance ±25% ±25% DC resistance Rated current Rated voltage Insulation resistance (m: )typ. 50 40 (A)max. 1.5 2 (V)max. 60 60 (M: )min. 10 10 Part No. ACP3225-102-2P-△□□□ ACP3225-501-2P-△□□□ Temperature derating was considered for the rated current. △ : Includes packaging style indication (T: ø180mm reel, TL: ø330mm reel). ○ Measurement equipment Measurement item Product No. Common mode impedance 4991A DC resistance 4338A Insulation resistance 4339A ＊ Equivalent measurement equipment may be used. Manufacturer Agilent Technologies Agilent Technologies Agilent Technologies TEMPERATURE CHARACTERISTICS (DERATING) ACP3225-102-2P ACP3225-501-2P 3.0 2.5 2.5 Current (A) Current (A) 2.0 1.5 1.0 0.5 0.0 2.0 1.5 1.0 0.5 0 10 20 30 40 50 Temperature (°C) 60 85 0.0 0 10 20 30 40 50 Temperature (°C) 60 85 Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150203 / cmf_commercial_power_acp3225_en.fm (7/8) E M C C o m p o n e n t s ACP3225 Type ELECTRICAL CHARACTERISTICS IMPEDANCE VS. FREQUENCY CHARACTERISTICS 10000 Impedance (Ω) 1000 102 Common mode 100 102 Differential mode 10 1 1 10 100 Frequency (MHz) 1000 10000 ○ Measurement equipment Product No. Manufacturer 4991A Agilent Technologies ＊ Equivalent measurement equipment may be used. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150203 / cmf_commercial_power_acp3225_en.fm (8/8) E M C C o m p o n e n t s ACP3225 Type PACKAGING STYLE REEL DIMENSIONS 2.0±0.5 E Type W1 9.5±0.5 9+1/–0 W2 13.5±1 13±1 N 100±1 60+1/–0 E 2 typ. 2 typ. N ACP3225 A ø330±2 ø180±3 1.0 ø13.0±0.2 W1 ø21.0±0.8 W2 A Dimensions in mm TAPE DIMENSIONS P2 t P0 W B F E øD0 A K P1 Dimensions in mm Type ACP3225 A 2.90±0.1 B 3.60±0.1 øD0 1.5+0.1/0 E 1.75±0.1 F 3.50±0.1 P0 4.0±0.1 P1 4.0±0.1 P2 2.0±0.1 W 8.00±0.1 K 2.35 t 0.25±0.05 500 to 560min. 160min. Drawing direction Taping 440min. Dimensions in mm Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150203 / cmf_commercial_power_acp3225_en.fm