ZRO1000A-LF PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • Digital Radio Equipment • Instrumentation Equipment £(f) (dBc/Hz) 14118 Stowe Drive, Suite B Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] • Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 1000 Typ Phase Noise @ 10 kHz offset (1 Hz BW) -129 Harmonic Suppression (2nd) -18 Tuning Voltage 1.5 Max Units 1000 MHz dBc/Hz -16 dBc 3.5 Vdc MHz/V 2 Tuning Sensitivity (avg.) 9 dBm 100 pF Pushing .2 MHz/V Pulling (12 dB Return Loss, Any Phase) .5 MHz 85 °C Max Units Power Output 5 Load Impedance 7 50 Input Capacitance Operating Temperature Range -40 Package Style Power Supply Requirements ZMX-14-SM Min Typ Supply Voltage (Vcc, nom.) 8 Supply Current (Icc) 25 Vdc 30 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B Voltage-Controlled Oscillator Surface Mount Module ZRO1000A-LF Rev A1 Tuning Curve, typ. FREQUENCY (MHz) 1004 1002 1000 85 °C 25 °C 998 -40 °C 996 994 992 0 0.5 1 1.5 2 2.5 3 3.5 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint 8 RECOMMENDED FOOTPRINT 7 SEVERAL HOLES OF o 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 6 5 0.030 MIN. CUTBACK FROM LIVE PADS 4 3 993 995 996 998 999 1000 1001 1002 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions GOLD PLATED PADS SOLDER MASK PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B