CRO1050A-LF PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • Test Equipment • Radar Systems • £(f) (dBc/Hz) 14118 Stowe Drive, Suite B Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 1045 Typ Phase Noise @ 10 kHz offset (1 Hz BW) -120 Harmonic Suppression (2nd) -10 Tuning Voltage 0.5 Tuning Sensitivity (avg.) Power Output Max Units 1055 MHz dBc/Hz -8 dBc 4.5 Vdc MHz/V 5 0 6 dBm Input Capacitance 50 pF Pushing .5 MHz/V Pulling (12 dB Return Loss, Any Phase) .5 MHz 85 °C Max Units Load Impedance Operating Temperature Range 50 -40 Package Style Power Supply Requirements Supply Voltage (Vcc, nom.) Supply Current (Icc) 3 MINI-16HL-SM Min Typ 5 25 Vdc 30 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B Voltage-Controlled Oscillator Surface Mount Module CRO1050A-LF Rev A1 Tuning Curve, typ. FREQUENCY (MHz) 1062 1057 1052 85 °C 25 °C -40 °C 1047 1042 1037 1032 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT 6 SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 5 4 3 2 0.030 MIN. CUTBACK FROM LIVE PADS 1 0 1034 1039 1042 1045 1048 1050 1053 1055 1058 1060 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions SOLDER MASK GOLD PLATED PADS PIN CONFIGURATION BOTTOM Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B