RFM products are now Murata products. RF1401D • • • • • Designed for 433.92 MHz Applications Advanced (Lithium Tantalate) LiTa03 design for Low Insertion Loss Designed for Match to 50Ω, No External LC Required Hermetically Sealed Surface Mount Package Complies with Directive 2002/95/EC (RoHS) 433.92 MHz SAW Filter Pb SM3838-8 Case 3.8 x 3.8 Item Center Frequency @ 25°C FC Minimum I.L. (433.0~434.71 MHz) (MHz) (dB) ILmin Minimum Typical Maximum Units - 433.920 - MHz 2.8 3.8 dB - 0.5 1.0 dB - kHz Pass band (relative to ILmin) 433.0~434.71 MHz (dB) Pass bandwidth (relative to ILmin) BW3 (KHz) Attenuation: (relative to ILmin) (dB) 1000 10~350 MHz (dB) 52 57 - 350~393 MHz (dB) 47 52 - 393~415 MHz (dB) 42 47 - 415~425.5 MHz (dB) 37 45 - 443.5~454 MHz (dB) 12 16 - 454~475 MHz (dB) 34 39 - 475~650 MHz (dB) 50 55 - 650~800 MHz (dB) 45 49 - Temperature Coeff -30 Operating Temperature Range Standard Reel Quantity ppm/k -40 Lid Symbolization (in addition to Lot and/or Date Codes) dB +85 °C 495 // YWWS Reel Size 7 Inch Reel Size 13 Inch Note 7 500 Pieces/Reel 3000 Pieces/Reel CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. NOTES: 1. 2. 3. 4. 5. 6. 7. 8. All specifications apply over the operating temperature range with filter soldered to the specified demonstration board unless noted otherwise. Ultimate rejection is dependent on PCB layout. Specifications subject to change without notice. Electrostatic Sensitive Device. Observe precautions for handling. US and international patents may apply. Murata, stylized Murata logo, and Murata N.A., Inc. are registered trademarks of Murata Manufacturing Co., Ltd. Tape and Reel Standard Per Ansi/EIA 481. This product complies with directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. ©2010-2015 by Murata Electronics N.A., Inc. RF1401D (R) 4/6/15 Page 1 of 2 www.murata.com Rating Input Power Level DC Voltage Storage Temperature 5 Soldering Temperature Value Units 10 dBm 12 VDC -45 to +90 °C 260 °C (10 seconds / 5 cycles max.) Electrical Connections Pin Connection 1 Input Ground 2 Input 3 Ground 4 Case Ground 5 Output Ground 6 Output 7 Ground 8 Case Ground A 1 7 H 7 1 2 6 6 2 3 5 5 3 F Case Dimensions A B C D E F G H 1 7 5 G 4 D Dimension 6 8 4 Matching Circuit to 50Ω Output E C B 8 8 4 2 Input 3 ©2010-2015 by Murata Electronics N.A., Inc. RF1401D (R) 4/6/15 Page 2 of 2 Min 3.6 3.6 1.00 0.95 0.90 0.50 2.39 1.40 mm Nom 3.8 3.8 1.20 1.10 1.0 0.6 2.54 1.75 Max 4.0 4.0 1.40 1.25 1.10 0.70 2.69 2.05 Min 0.14 0.14 0.04 0.033 0.035 0.020 0.090 0.055 Inches Nom 0.15 0.15 0.05 0.043 0.04 0.024 0.100 0.069 Max 0.16 0.16 0.055 0.05 0.043 0.028 0.110 0.080 www.murata.com