Formosa MS Bridge Rectifier KBP300G THRU KBP310G List List................................................................................................. 1 Package outline............................................................................... 2 Features.......................................................................................... 2 Mechanical data............................................................................... 2 Maximum ratings ............................................................................. 2 Rating and characteristic curves........................................................ 3 Pinning information........................................................................... 4 Marking........................................................................................... 4 Tube packing & Bulk packing............................................................. 4 Suggested thermal profiles for soldering processes............................. 5 High reliability test capabilities...........................................................6 http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Page 1 Document ID Issued Date DS-242127 2008/02/10 Revised Date - Revision Page. A 6 Formosa MS Bridge Rectifier KBP300G THRU KBP310G 3.0A Glass Passivated Single Phase Bridge Rectifiers - 50 - 1000V Package outline KBP Features 0.125 (3.2)x 45O 0.600(15.24) 0.560(14.22) rectification for switching power supply, home, office equipment and telecommunication applications. • Glass passivated chip junction. • Lead-free parts meet RoHS requirments. • UL recognized file # E321971 + ~ ~ - 0.50 (12.7) MIN. 0.64 (16.25) MIN. Mechanical data 0.060 (1.52) 0.160(4.1) 0.140(3.6) 0.034(0.86) 0.028(0.76) • Epoxy:UL94-V0 rated flame retardant • Case : Molded plastic, KBP • Terminals : Solder plated, solderable per 0.500(12.70) 0.460(11.68) 0.460(11.68) 0.420(10.67) • Ideal for printed circuit board. • High forward surge current capability. • Low reverse leakage, typical IR less than 0.5ìA. • General purpose use in AC-TO-AC bridge full wave 0.053(1.35) 0.045(1.15) 0.200(5.08) 0.180(4.57) Dimensions in inches and (millimeters) MIL-STD-750, Method 2026 • Polarity : marked on body • Mounting Position : Any • Weight : Approximated 1.70 gram Maximum ratings (AT T A=25 oC unless otherwise noted) PARAMETER CONDITIONS Forward rectified current See Fig.1 Forward surge current 8.3ms single half sine-wave superimposed on rate load (JEDEC methode) V R = V RRM T A = 25 OC Reverse current V R = V RRM T A = 125 OC Symbol MIN. TYP. 3.0 A I FSM 60.0 A 5.0 IR I 2t 15 Typical Junction capacitance Note1 CJ 25 R èJC R èJA Storage temperature T STG uA 500 t < 8.3 m s Note2 UNIT IO Rating for fusing Typical thermal resistance per leg MAX. A 2s pF 11.0 O C/W 30.0 O C/W +175 -65 O C Note 1. Measured at 1.0MHz and applied reverse voltage of 4.0 voltage. 2. Thermal resistance from junction to ambient and from junction to lead mounted on P.B.C. with 0.47" X 0.47"(12x12mm) copper pads. *1 V RRM (V) V RMS*2 (V) *3 VR (V) KBP300G 50 35 50 SYMBOLS KBP301G 100 70 100 KBP302G 200 140 200 KBP304G 400 280 400 KBP306G 600 420 600 KBP308G 800 560 800 KBP310G 1000 700 1000 http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 *4 VF (V) Operating temperature T J, ( OC) *1 Repetitive peak reverse voltage *2 RMS voltage *3 Continuous reverse voltage 1.10 -55 to +150 *4 Maximum forward voltage @3.0A Page 2 Document ID Issued Date DS-242127 2008/02/10 Revised Date - Revision Page. A 6 FIG. 2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT FIG.1-OUTPUT RECTIFIED CURRENT DERATING CURVE 3.0 60HZ RESISTIVE OR INDUCTIVE LOAD 2.5 2.0 1.5 1.0 0.5 0 20 40 60 80 100 120 140 PEAK FORWARD SURGE CURRENT, I FSM (A) AVERAGE FORWARD OUTPUT CURRENT, I F(AV) (A) Rating and characteristic curves (KBP300G THRU KBP310G) 60 40 20 1 CYCLE 0 160 1 O 20 O T=25 C J PULSE WIDTH=300ìS 1% DUTY CYCLE 10 1.0 0.1 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 INSTANTANEOUS REVERSE CURRENT, IR (uA) INSTANTANEOUS FORWARD CURRENT, I F(A) FIG. 3-TYPICAL INSTANTANEOUR FORWARD CHARACTERISTICS (PER LEG) 100 FIG. 4-TYPICAL REVERSE CHARACTERISTICS PER LEG 100 O TJ=125C O TJ=100C 10 1.0 0.1 TJ=25 OC 0.01 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE ( %) INSTANTANEOUS FORWARD VOLTAGE, VF (V) JUNCTION CAPACITANCE, C J (pF) 10 NUMBER OF CYCLES AT 60 HZ AMBIENT TEMPERATURE, TA ( C) 100 10 1 0.1 1 10 100 REVERSE VOLTAGE, V R (V) http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Page 3 Document ID Issued Date DS-242127 2008/02/10 Revised Date - Revision Page. A 6 Formosa MS Bridge Rectifier KBP300G THRU KBP310G Pinning information Simplified outline + ~ ~ Symbol + - ~ ~ Marking Type number Marking code KBP300G KBP301G KBP302G KBP304G KBP306G KBP308G KBP310G KBP300G KBP301G KBP302G KBP304G KBP306G KBP308G KBP310G Tube packing PACKAGE KBP TUBE (pcs) 30 TUBE SIZE (m/m) 470*37.4*7.4 BOX (pcs) INNER BOX (m/m) 1200 490*145*100 CARTON SIZE (m/m) CARTON (pcs) 505*325*235 APPROX. GROSS WEIGHT (kg) 17.0 4,800 Bulk packing DEVICE Q'TY 1 INNER CASE (PCS / BOX) BOX SIZE TYPE KBP CARTON Q'TY 2 SIZE (PCS / CARTON) (m/m) 500 http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 200 * 200 * 35 Page 4 CROSS WEIGHT(kg) (m/m) 445 * 215 * 260 APPROX. 6,000 Document ID Issued Date DS-242127 2008/02/10 15.0 Revised Date - Revision Page. A 6 Formosa MS Bridge Rectifier KBP300G THRU KBP310G Suggested thermal profiles for soldering processes 1.Storage environment: Temperature=10 oC~35 oC Humidity=65%±15% 2.Reflow soldering of surface-mount devices Critical Zone T L to T P tP TP Ramp-up TL tL Temperature T smax T smin TS ts Preheat 25 Ramp-down t25 oC to Peak Wave Soldering IR Reflow Time 3.Flow (wave)soldering (solder dipping) Profile Feature Soldering Condition Average ramp-up rate(T L to TP ) <3oC/sec Preheat -Temperature Min(Tsmin) -Temperature Max(Tsmax) -Time(min to max)(t s ) 100oC 150oC 60~120sec Tsmax to TL -Ramp-upRate <3oC/sec Time maintained above: -Temperature(TL ) -Time(tL ) 183oC 60~150sec 255oC-0/+5 oC Peak Temperature(T P ) Time within 5 oC of actual Peak Temperature(tP ) 10~30sec Ramp-down Rate <6 oC/sec Time 25oC to Peak Temperature <6minutes http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Page 5 Document ID Issued Date DS-242127 2008/02/10 Revised Date - Revision Page. A 6 Formosa MS Bridge Rectifier KBP300G THRU KBP310G High reliability test capabilities Item Test Conditions Reference O 1. Solder Resistance at 260±5 C for 10±2sec. immerse body into solder 1/16"±1/32" MIL-STD-750D METHOD-2031 2. Solderability at 245±5 OC for 5 sec. MIL-STD-202F METHOD-208 3. High Temperature Reverse Bias V R=80% rate at T A=150 OC for 168 hrs. MIL-STD-750D METHOD-1026 4. Forward Operation Life Rated average rectifier current at T=25 OC for 500hrs. MIL-STD-750D METHOD-1027 T A = 25 OC, I F = I O On state: power on for 5 min. off state: power off for 5 min. on and off for 500 cycles. MIL-STD-750D METHOD-1036 5. Intermittent Operation Life 6. Pressure Cooker 15P SIG at TA=121 OC for 4 hrs. 7. Temperature Cycling -55 OC to +125OC dwelled for 30 min. and transferred for 5min. total 10 cycles. 8. Thermal Shock 9. Forward Surge 10. Humidity 11. High Temperature Storage Life 12. Solvent Resistance http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 MIL-STD-750D METHOD-1051 MIL-STD-750D METHOD-1056 0 OC for 5 min. rise to 100 OC for 5 min. total 10 cycles. MIL-STD-750D METHOD-4066-2 8.3ms single half sine-wave superimposed on rated load, one surge. at TA=65 OC, RH=98% for 1000hrs. MIL-STD-750D METHOD-1038 at 175OC for 1000 hrs. MIL-STD-750D METHOD-1031 Dip into Freon at 25OC for 1 min. MIL-STD-202F METHOD-215 Page 6 Document ID Issued Date DS-242127 2008/02/10 Revised Date - Revision Page. A 6