ANALOG CROSSPOINT SWITCH PRODUCT OVERVIEW Zarlink’s high-performance analog crosspoint switches are used in a variety of telecom, medical and video applications. The switch arrays range from 8x4 and 8x16 and can be cascaded to increase the matrix size. Performance characteristics include fast hold and setup times, minimum feedthrough, low crosstalk High-Performance Analog Crosspoint Switches Internal control latches and address decoder Short setup and hold times and maximum on-stage resistance of 65 ohms at 12 V. For added flexibility, the Wide operating voltage: 4.5 V to 13.2 V switches are designed to operate over a wide range of voltages, typically from 12 Vpp analog signal capability Full CMOS switch for low distortion 4.5 V to 13.2 V. Minimum feedthrough and crosstalk MT8816 8x16 Analog Switch Array Separate analog and digital reference supplies The MT8816 is fabricated in ISO-CMOS technology, providing low power dis- Low power consumption ISO-CMOS technology sipation and high reliability. The device contains a 8x16 array of crosspoint switches along with a 7 to 128 line decoder and latch circuits. Any one of the Typical Applications Key systems 128 switches can be addressed by selecting the appropriate seven address bits. PBX systems The selected switch can be turned on or off by applying a logical one or zero to Mobile radio the data input. Test equipment/instrumentation Analog/digital multiplexers Audio/video switching Subscriber Loop Analog Phones Analog PBX Subscriber Loop Interface Circuit (SLIC) 8x8 Analog Crosspoint Switch MT8816 Subscriber Loop Interface Circuit (SLIC) Subscriber Loop Interface Circuit (SLIC) Subscriber Loop Analog Phones Subscriber Loop Interface Circuit (SLIC) 8x8 Analog Crosspoint Switch MT8816 Integrated DTMF Transceiver MT8885 To Central Office Central Office Interface Circuit (COIC) PBX CPU ANALOG CROSSPOINT SWITCH Part # Features l l >10 l l l l l l l l l l >10 >10 >10 >10 >10 >10 >10 >10 >10 >10 >10 >10 10 >10 >10 >10 >10 >10 10 >10 >10 >10 10 10 >10 >10 65 65 65 65 10 >10 +/- 12 8x4 4.5 -13.2 14 65 10 45 MT8806 8x8 4.5 -13.2 45 +/- 12 65 >10 4.5 -13.2 MT8808 8x8 4.5 -14.5 45 +/- 12 >10 +/- 12 MT8809 8x12 4.5 -13.2 45 65 >10 45 MT8812 8x12 4.5 -13.2 +/- 12 65 >10 12 MT8814 8x12 45 3.5 10 45 MT8815 4.5 -13.2 45 MT093 is a variation of the MT8812. The part is a drop in replacement of the M093 from SGS Thompson. 8x16 Chip select MT8816 Master reset >20 Data hold ns >20 Data setup ns >20 Address hold ns >20 Address setup ns 10 Max _Ron 4.5 -14.5 Max Ron 8x12 Analog input VP-P MT093 Max frequency MHz Packaging 24 pin PDIP, 28 pin PLCC 28 pin PDIP, 28 pin PLCC 28 pin PDIP, 28 pin PLCC 40 pin PDIP, 44 pin PLCC 40 pin PDIP, 44 pin PLCC 40 pin PDIP, 44 pin PLCC 40 pin PDIP, 44 pin PLCC 40 pin PDIP, 44 pin PLCC www.ZARLINK.com © 2010, Zarlink Semiconductor Inc. All Rights Reserved. Publication Number 10ZS059 Supply voltage VDC Array Information relating to products and services furnished herein by Zarlink Semiconductor Inc. or its subsidiaries is believed to be reliable. The products, their specifications, services and other information appearing in this publication are subject to change by Zarlink without notice. ZARLINK, ZL, ZLE and the Zarlink logo are trademarks of Zarlink Semiconductor Inc.