ZL60101/2 12 x 2.7 Gbps Parallel Fiber Optic Link Transmitter and Receiver Shortform Data Sheet A full Data Sheet is available to qualified customers. To register, please send an email to [email protected]. March 2007 Ordering Information ZL60101MLDC Parallel Fiber Transmitter ZL60102MLDC Parallel Fiber Receiver ZL6010xMMDC Parallel Fiber Module with EMI gasket 0°C to +80°C Description The ZL60101 and ZL60102 together make a high speed transmitter/receiver pair for parallel fiber applications. Features • • • • • • • • • • • 12 parallel channels, total 32.6 Gbps capacity Data rate up to 2.72 Gbps per channel 850 nm VCSEL array Link reach 300 m with 50/125 µm 500 MHz.km fiber at 2.5 Gbps Channel BER better than 10-12 Industry standard MPO/MTP ribbon fiber connector interface Pluggable MegArray® ball grid array connector Optionally available with EMI shield Laser class 1M IEC 60825-1:2001 compliant Power supply 3.3 V Compatible with industry MSA The ZL60101 transmitter module converts parallel electrical input signals via a laser driver and a VCSEL array into parallel optical output signals at a wavelength of 850 nm. The ZL60102 receiver module converts parallel optical input signals via a PIN photodiode array and a transimpedance and limiting amplifier into electrical output signals. The modules are pluggable each fitted with an industrystandard MegArray® BGA connector. This provides ease of assembly on the host board and enables provisioning of bandwidth on demand. Applications • • • • Reliability assurance is based on Telcordia GR-468CORE and the parts are compliant to the EU directive 2002/95/EC issued 27 January 2003 [RoHS]. High-speed interconnects within and between switches, routers and transport equipment Low cost SONET/SDH VSR (Very Short Reach) OC-192/STM64 connections InfiniBand® connections Interconnects rack-to-rack, shelf-to-shelf, boardto-board, board-to-optical backplane Exemption 6 & 7 1 Zarlink Semiconductor Inc. Zarlink, ZL and the Zarlink Semiconductor logo are trademarks of Zarlink Semiconductor Inc. Copyright 2007, Zarlink Semiconductor Inc. All Rights Reserved. ZL60101/2 Shortform Data Sheet Classified in accordance with IEC 60825-1/A2:2001, IEC 60825-2: 2000 Class 1 M Laser Product Emitted wavelength: 840 nm 1 2 3 4 5 6 7 8 9 10 11 12 DIN1+ DIN1- VCSEL Driver VCSEL Array DIN12+ DIN12- VCSEL Driver Controller VCC VEE RESET Tx_DIS Tx_EN FAULT Figure 1 - ZL60101 Transmitter Block Diagram Front view - MTP key up Ch12 Ch11 Ch10 Ch9 Ch8 Ch7 Ch6 Ch5 Ch4 Host circuit board Table 1 - Transmitter Optical Channel Assignment 2 Zarlink Semiconductor Inc. Ch3 Ch2 Ch1 ZL60101/2 1 2 3 4 5 6 7 8 9 10 11 12 Shortform Data Sheet DOUT1+ DOUT1- TransImpedance and Limiting Amplifier PIN Array DOUT12+ DOUT12- VCC Rx_EN Rx_SD Rx_SD1 Rx_SD12 SQ_EN VEE Figure 2 - ZL60102 Receiver Block Diagram Front view - MTP key up Ch12 Ch11 Ch10 Ch9 Ch8 Ch7 Ch6 Ch5 Ch4 Host circuit board Table 2 - Receiver Optical Channel Assignment 3 Zarlink Semiconductor Inc. Ch3 Ch2 Ch1 NOTES:1. All dimensions in mm. 2. Tolerancing per ASME Y14.5M-1994. Package code © Zarlink Semiconductor 2002. All rights reserved. ISSUE 1 ACN JS004293R1A DATE 12-JUN-03 APPRD. TD/BE Previous package codes MJD Drawing type Package drawing - module layout Title JS004293 NOTES:1. All dimensions in mm. 2. Tolerancing per ASME Y14.5M-1994. Package code © Zarlink Semiconductor 2002. All rights reserved. ISSUE 1 ACN JS004293R1A DATE 12-JUN-03 APPRD. TD/BE Previous package codes MJD Drawing type Package Drawing, Host circuit board footprint layout Title JS004293 For more information about all Zarlink products visit our Web Site at www.zarlink.com Information relating to products and services furnished herein by Zarlink Semiconductor Inc. or its subsidiaries (collectively “Zarlink”) is believed to be reliable. However, Zarlink assumes no liability for errors that may appear in this publication, or for liability otherwise arising from the application or use of any such information, product or service or for any infringement of patents or other intellectual property rights owned by third parties which may result from such application or use. Neither the supply of such information or purchase of product or service conveys any license, either express or implied, under patents or other intellectual property rights owned by Zarlink or licensed from third parties by Zarlink, whatsoever. Purchasers of products are also hereby notified that the use of product in certain ways or in combination with Zarlink, or non-Zarlink furnished goods or services may infringe patents or other intellectual property rights owned by Zarlink. This publication is issued to provide information only and (unless agreed by Zarlink in writing) may not be used, applied or reproduced for any purpose nor form part of any order or contract nor to be regarded as a representation relating to the products or services concerned. The products, their specifications, services and other information appearing in this publication are subject to change by Zarlink without notice. No warranty or guarantee express or implied is made regarding the capability, performance or suitability of any product or service. Information concerning possible methods of use is provided as a guide only and does not constitute any guarantee that such methods of use will be satisfactory in a specific piece of equipment. It is the user’s responsibility to fully determine the performance and suitability of any equipment using such information and to ensure that any publication or data used is up to date and has not been superseded. Manufacturing does not necessarily include testing of all functions or parameters. These products are not suitable for use in any medical products whose failure to perform may result in significant injury or death to the user. All products and materials are sold and services provided subject to Zarlink’s conditions of sale which are available on request. Purchase of Zarlink’s I2C components conveys a licence under the Philips I2C Patent rights to use these components in and I2C System, provided that the system conforms to the I2C Standard Specification as defined by Philips. Zarlink, ZL, the Zarlink Semiconductor logo and the Legerity logo and combinations thereof, VoiceEdge, VoicePort, SLAC, ISLIC, ISLAC and VoicePath are trademarks of Zarlink Semiconductor Inc. TECHNICAL DOCUMENTATION - NOT FOR RESALE