8 D 5 6 7 4 2 3 NOTES 1. ROHS COMPLIANT. 2. UL 94-HB FLAMMABILITY RATING. -40 C TO 85 C OPERATING TEMPERATURE. 3. 4. SUITABLE FOR LIGHT PIPE WITH 2.2MM JACKET AND OPTICAL CORE NO GREATER THAN 1.5MM. 5. DO NOT WAVE SOLDER WITH THIS DEVICE. FOR BEST RESULTS USE ONLY NARROW VIEWING ANGLE NON-DIFFUSED LEDS WITH 6. OUTPUT POWER GREATER THAN 100mcd. 1 REVISIONS ECN # 388 404 REV. 000 001 DESCRIPTION INITIAL RELEASE REVISED PER ECR 020612KH01 DATE 1/4/12 2/6/12 INITIALS KH KH CHK'D AZ AZ D .06in 1.5mm TRIMMED FIBER OPTIC JACKET .20in 5mm 0.06in±.02 1.5±0.5 .18in 4.6mm A 3 PRESS FIBER OPTIC IN C C .63in 16mm 1 B A CLIP ONTO LED .35in 8.9mm .34in 8.6mm .31in 7.8mm B SECTION A-A SCALE 4 : 1 .20in 5mm 5MM LED CLEARANCE 0.31in 8.0mm 2X .04in 0.9mm 0.04in 1.2mm MAX .23in 5.8mm .21in 5.3mm 2 SOLDER IN PLACE DIMENSION STYLE: INCHES [MM] GENERAL TOLERANCES UNLESS OTHERWISE SPECIFIED .X .XX .XXX A INCHES .010 .005 .001 ANGLE 1/2 MM .250 .127 .025 SURFACE 3.2 BREAK ALL CORNERS AND SHARP TEXTURE: EDGES .030 MAX 7 LIGHT PIPE AS ASSEMBLED 6 DATE KHOWARD 1/4/12 CHECKED AZANELLI 1/10/12 OPTOELECTRONICS 190 BOSSTICK BLVD. SUITE 101 SAN MARCOS, CA 92069 U.S.A PHONE: (760) 560-1300, FAX: (760) 560-1301 EMAIL: [email protected] TITLE: MATERIAL MOUNT, 5mm THROUGHHOLE LED THIRD ANGLE PROJECTION PROPRIETARY AND CONFIDENTIAL FINISH RECOMMENDED PWB DEVICE LAYOUT 5 APPROVAL DRAWN NYLON 6/6, BLACK UL 94-HB 0.10in 2.5mm LIGHT PIPE PREPARATION AND SEQUENCE OF ASSSEMBLY 8 .39in 10mm THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF VISUAL COMMUNICATIONS COMPANY, INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF VISUAL COMMUNICATIONS COMPANY, INC IS PROHIBITED. 4 3 REV SIZE DWG. NO. SEE NOTES B SCALE: 5:1 DO NOT SCALE DRAWING 2 001 THR 5 22 SHEET 1 OF 1 1 A