Bicolor 1206 SMD LED VAOL-S12SUR-SYGC-322711-C █ Features： • Package in 8mm tape on 7“ diameter reel. • Compatible with automatic placement equipment. • Compatible with infrared and vapor phase reflow solder process. • Multi-color type. █ Package Dimension： SYG SUR - + █ Description： • The SMD Taping is much smaller than leaded components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. • Besides, lightweight makes them ideal for miniature application, etc. █ Applications： ■ Notes： • Automotive: backlighting in dashboard and switch. • Telecommunication: indicator and backlighting in telephone and fax. • Flat backlight for LCD, switch and symbol. • General use. PART NO VAOL-S12SUR-SYGC322711-C engineered to light up your design Tolerances Unless Dimension ± 0.1mm Angle±0.5° CHIP Material Emitted Color Lens Color AlGaInP Hyper Red Water clear AlGaInP Super Yellow Green www.vcclite.com 1.800.522.5546 02/15 Rev 1 Bicolor 1206 SMD LED VAOL-S12SUR-SYGC-322711-C ■ Package Dimension： ■ Loaded quantity per reel 2000 pcs/reel： engineered to light up your design www.vcclite.com 1.800.522.5546 02/15 Rev 1 Bicolor 1206 SMD LED VAOL-S12SUR-SYGC-322711-C ■ Absolute Maximum Ratings at Ta = 25℃ Parameter Symbol Rating Reverse Voltage Vr Forward Current If Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Soldering Temperature Tsol 260 (for 5 second) ℃ Electrostatic Discharge ESD 2000 V Power Dissipation Pd SUR: 60 SYG: 60 mW Peak Forward Current(Duty 1/10 @ 1KHZ) If(Peak) SUR: 160 SYG: 160 mA 5 SUR: SYG: Unit V 25 25 mA ■ Reliability Test Item And Condition NO Item Test Conditions Test Hours/Cycle Sample Size Ac/Re 1 Solder Heat TEMP : 260℃ ± 5 ℃ 5 SEC 76 Pcs 0/1 50 CYCLE 76 Pcs 0/1 50 CYCLE 76 Pcs 0/1 H : +85℃ 30min ∫ 5 min L : -55℃ 30min H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 2 Temperature Cycle 3 Thermal Shock 4 High Temperature Storage TEMP : 100℃ 1000 HRS 76 Pcs 0/1 5 Low Temperature Storage TEMP : -55℃ 1000 HRS 76 Pcs 0/1 6 DC Operating Life High Temperature / High Humidity If = 20 Ma 1000 HRS 76 Pcs 0/1 85℃/85% RH 1000 HRS 76 Pcs 0/1 7 engineered to light up your design www.vcclite.com 1.800.522.5546 02/15 Rev 1 Bicolor 1206 SMD LED VAOL-S12SUR-SYGC-322711-C ■ Electronic Optical Characteristics : Parameter Luminous intensity Symbol Min. SUR: Iv SYG: Peak Dominant λd Wavelength △λ Forward Vf Reverse Current mcd If=20mA ----- 140 ----- deg If=20mA ----- 632 575 ----- nm If=20mA ----- 624 573 ----- nm If=20mA ----- 20 20 ----- nm If=20mA ----- 2.0 2.0 2.4 2.4 V If=20mA ----- ----- 10 µA Vr=5V SUR: SUR: SUR: SYG: engineered to light up your design If=2mA 15 SUR: Ir mcd 10 SYG: Voltage ----- SYG: SYG: Spectrum Radiation Bandwidth Condition 36 SYG: Wavelength 1 Unit 15 2θ1/2 λp 2 Max. SUR: Viewing Angle ----- Typ. www.vcclite.com ----- 1.800.522.5546 02/15 Rev 1 Bicolor 1206 SMD LED VAOL-S12SUR-SYGC-322711-C ■ Typical Electro-Optical Characteristic Curves SUR engineered to light up your design www.vcclite.com 1.800.522.5546 02/15 Rev 1 Bicolor 1206 SMD LED VAOL-S12SUR-SYGC-322711-C ■ Typical Electro-Optical Characteristic Curves SYG engineered to light up your design www.vcclite.com 1.800.522.5546 02/15 Rev 1 Bicolor 1206 SMD LED VAOL-S12SUR-SYGC-322711-C ■ Test Circuit ■ Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage time 2.1 The operation of temperature and R.H. are : 5℃~35℃, R.H.60%. 2.2 Once the package is opened , the products should be used within a week. Otherwise , they should be keep in a damp proof box with desiccants. Considering the tape life , we suggest our customers to use our products within a year(from production date). 2.3 f opened more than one week in an atmosphere 5℃~35℃, R.H.60%, they should be treated at 60℃±5℃for 15hrs. 2.4 When you discover that the desiccant in the package has a pink color (normal=blue) , you should treat them in the same conditions as 2.3. engineered to light up your design www.vcclite.com 1.800.522.5546 02/15 Rev 1 Bicolor 1206 SMD LED VAOL-S12SUR-SYGC-322711-C ■ Soldering heat reliability ( DIP ) Please refer to the following figure : ■ Soldering Iron Basic spec is ≦5 sec when 260℃.If temperature is higher, time should be shorter (+10℃ - -1sec). Power dissipation of iron should be smaller than 15 W , and temperature should be controllable. Surface temperature of the device should be under 230 ℃. ■ Rework 1. Customer must finish rework within 5 sec under 260℃. 2. Copper foil can not be touched by the head of iron. 3. Twin-head type is preferred. ○ engineered to light up your design www.vcclite.com × 1.800.522.5546 02/15 Rev 1 Bicolor 1206 SMD LED VAOL-S12SUR-SYGC-322711-C ■ Reflow Temp / Time： to rise cooling preheat engineered to light up your design www.vcclite.com 1.800.522.5546 02/15 Rev 1