CMF3, CMF6 Power entry modules without line filter www.schurter.com/PG05 IEC Appliance Inlet C6 with Line Switch 1-pole CMF3 C6 70° C Description -Panel Mount: Screw-on mounting on PCB, from top or bottom -2 Functions: Appliance Inlet Protection class I, Line Switch 1‑pole -For PCB mounting Characteristics -Easy mounting with center bolt and snapper or srewed on PCB or housing -Electrical connection done on the PCB -Bi-positioning of the switch from left or right side, Standard CMF with switch on right side -With or without rear-side insulation cover -Suitable for use in equipment according to IEC/UL 60950 Other versions on request -Line switch with other rocker marking -Line switch on left of inlet References Alternative: protection class II version Weblinks pdf-datasheet, html-datasheet, General Product Information, Approvals, CE declaration of conformity, RoHS, CHINA-RoHS, REACH, Mating Connectors, e-Shop, SCHURTER-Stock-Check, Distributor-StockCheck, CAD-Drawings, Accessories, Detailed request for product Technical Data Ratings IEC Ratings UL/CSA Dielectric Strength Allowable Operation Temp. Degree of Protection Protection Class Terminal Material: Housing 2.5 A / 250 VAC; 50 Hz 6 A / 125 VAC; 60 Hz > 2.3 kVAC between L-N > 2.8 kVAC between L/N-PE (1 min/50 Hz) -25 °C to 70 °C from front side IP 40 acc. to IEC 60529 Suitable for appliances with protection class I acc. to IEC 61140 PCB 1.6 mm Additional ground terminal Thermoplastic, black, UL 94V-0 Appliance Inlet Line Switch C6 acc. to IEC 60320, UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 2.5 A, Protection Class I Rocker switch 1-pole, non-illuminated, acc. to IEC 61058-1 Technical Details Connectors 1 CMF3, CMF6 Power entry modules without line filter www.schurter.com/PG05 Dimensions 24.3 53.3 2.3 26.65 22.3 2.3 26.65 0.9 2 3 19 R 1 27.3 9 1.6 4 4 6.75 2.8 4.5 14.15 R 1.05 10 3 -0.1 9.5 7 2.4 1.3 8.15 8.25 5 2.1 0 0.8 0.8 3.8 8 4.15 45 ±0.1 27.55 11 3 25.75 10 With insulation cover The size of the mounting cut-out can be selected as required. Drilling Diagram / CMF3 (C6) Fixation on PCB or housing from below Fixation on PCB or housing from above 9.7 8.25 7 +0.1 0 1) M3x12 21.6 4.2±0.05 13.4 1.6 3.2 0 5.9- 0.1 9 9 ±0.1 10 3 D1 23.4 1) self tapping screw 45±0.1 28.05 1) M3x12 11±0.13 3 9.5 5 5 11 3.81 1.6 3 +0.30 11 +0.15 14.3 +0.1 1.6 0 13 10 1) self tapping screw 29.85 D1 = 6.2 mm mounting from above / D1 = 3.6 mm mounting from below PC Board 1.6 mm / Dimensions without tolerance: ≤ 15 = ± 0.05 / > 15 = ± 0.10 Drilling diagram CMF6 mirror-inverted All Variants Connectors Mounting side Cover C6 from below with cover C6 from below with cover C6 from below with cover C6 from below Ground terminal Ground terminal direction Order Number - - CMF3.1132.12 Solder terminal 2.8 x 0.8 mm angled to pin axis CMF3.1133.12 Solder terminal 2.8 x 0.8 mm straight CMF3.1134.12 without cover - - CMF3.1032.12 C6 from below without cover Solder terminal 2.8 x 0.8 mm angled to pin axis CMF3.1033.12 C6 from below without cover Solder terminal 2.8 x 0.8 mm straight CMF3.1034.12 C6 from top with cover - - CMF3.1112.12 C6 from top with cover Solder terminal 2.8 x 0.8 mm angled to pin axis CMF3.1113.12 C6 from top with cover Solder terminal 2.8 x 0.8 mm straight CMF3.1114.12 2 Connectors CMF3, CMF6 Power entry modules without line filter www.schurter.com/PG05 Connectors Mounting side Cover Ground terminal Ground terminal direction Order Number C6 from top without cover C6 from top without cover - - CMF3.1012.12 Solder terminal 2.8 x 0.8 mm angled to pin axis C6 from top without cover Solder terminal 2.8 x 0.8 mm CMF3.1013.12 straight CMF3.1014.12 Availability for all products can be searched real-time:http://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER 50 Pcs 24.08.2015 Packaging unit The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. Connectors 3