CMF1, CMF4 Power entry modules without line filter www.schurter.com/pg05 IEC Appliance Inlet C8 with Line Switch 1-pole CMF1 C8 70° C Description Characteristics -Panel Mount: Screw-on mounting on PCB, from top or bottom -2 Functions: Appliance Inlet Protection class II, Line Switch 1‑pole -For PCB mounting -Alternative: polarized version or protection class I CMF2, CMF5; CMF3, CMF6 -Easy mounting with center bolt and snapper or srewed on PCB or housing -Electrical connection done on the PCB -Bi-positioning of the switch from left or right side, Standard CMF with switch on right side -With or without rear-side insulation cover -Qualified for use in equipment according IEC/EN 60950 Other versions on request -Line switch with other rocker marking -Line switch on left of inlet References General Product Information Weblinks Approvals, RoHS, CHINA-RoHS, Mating Connectors, e-Store, Distributor-Stock-Check, Accessories Technical Data Ratings IEC Ratings UL/CSA Dielectric Strength Allowable Operation Temp. Degree of Protection Protection Class Terminal Material: Housing 2.5 A / 250 VAC; 50 Hz 6 A / 125 VAC; 60 Hz > 2.3 kVAC between L-N > 2.8 kVAC between L/N-PE (1 min/50 Hz) -25 °C to 70 °C from front side IP 40 acc. to IEC 60529 Suitable for appliances with protection class 2 acc. to IEC 61140 PCB 1.6 mm Thermoplastic, black, UL 94V-0 Appliance Inlet Line Switch Connectors C8 acc. to IEC/EN 60320-1, UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 2.5 A, Protection Class 2 Rocker switch 1-pole, non-illuminated, acc. to IEC 61058-1 Technical details CMF1, CMF4 Power entry modules without line filter www.schurter.com/pg05 Dimensions 53.3 mm 24.3 53.3 2.3 26.65 26.65 22.3 2.3 0.9 2 3 19 R 1 2.8 1.6 N 4 4 3 9 18 R L 0 0.8 1.05 3 -0.1 2.8 8.6 18.45 0.8 7 8.15 6.16 8 4.15 10 45 ±0.1 27.55 11 3 25.75 2.4 1.3 10.2 8.25 with insulation cover The size of the mounting cut-out can be selected as required. Fixation on PCB or housing from below Fixation on PCB or housing from above +0.30 11 +0.15 14.3 1) M3x12 1) M3x12 0 5.9- 0.1 1) self tapping screw 13 1.6 13.4 9 9 ±0.1 4.2±0.05 11±0.13 1) self tapping screw Drilling diagrams CMF1 and CMF2 (C8) 10.2 8.25 7 +0.1 0 1.6 11 +0.1 0 D1 21.6 10 3 3 1.6 5.3 6.16 8.6 3.2 23.4 45±0.1 28.05 29.85 Variants Standard CMF with switch on right side Connectors Mounting side C8 from below C8 from below C8 from top C8 from top Packaging unit Cover l l Ground terminal Ground terminal direction Order Number - - CMF1.1031.12 - - CMF1.1131.12 - - CMF1.1011.12 - - CMF1.1111.12 50 Pcs Connectors Power entry modules without line filter CMF1, CMF4 www.schurter.com/pg05 Mating Outlets/Connectors Category / Description Power Cord Overview complete Power Cord with IEC Connector C7, Straight 70°C 2510 Power Cord with IEC Connector C7, Angled 2511 Power Cord with IEC Plug C7, Angled 2514 Power Cord with IEC Connector C7, Straight 70°C 4810 Power Cord further types to CMF1, CMF4 The specifications, descriptions and illustrations indicated in this document are based on Connectors current information. All content is subject to modifications and amendments.