CMF2, CMF5 Power entry modules without line filter www.schurter.com/pg05 IEC Appliance Inlet C8 polarized with Line Switch 1-pole CMF2 C8 polarized 70° C Description Characteristics -Panel Mount: Screw-on mounting on PCB, from top or bottom -2 Functions: Appliance Inlet Protection class II, Line Switch 1‑pole -For PCB mounting -Alternative: unpolarized version or protection class I CMF1, CMF4; CMF3, CMF6 -Easy mounting with center bolt and snapper or srewed on PCB or housing -Electrical connection done on the PCB -Bi-positioning of the switch from left or right side, Standard CMF with switch on right side -With or without rear-side insulation cover -Qualified for use in equipment according IEC/EN 60950 Other versions on request -Line switch with other rocker marking -Line switch on left of inlet References General Product Information Weblinks Approvals, RoHS, CHINA-RoHS, Mating Connectors, e-Store, Distributor-Stock-Check, Accessories Technical Data Ratings IEC Ratings UL/CSA Dielectric Strength Allowable Operation Temp. Degree of Protection Protection Class Terminal Material: Housing 2.5 A / 250 VAC; 50 Hz 6 A / 125 VAC; 60 Hz > 2.3 kVAC between L-N > 2.8 kVAC between L/N-PE (1 min/50 Hz) -25 °C to 70 °C from front side IP 40 acc. to IEC 60529 Suitable for appliances with protection class 2 acc. to IEC 61140 PCB 1.6 mm Thermoplastic, black, UL 94V-0 Appliance Inlet Line Switch Connectors C8p following IEC/EN 60320-1, UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 2.5 A, Protection Class 2 Rocker switch 1-pole, non-illuminated, acc. to IEC 61058-1 Technical details CMF2, CMF5 Power entry modules without line filter www.schurter.com/pg05 Dimensions 53.3 mm 24.3 53.3 2.3 26.65 26.65 22.3 2.3 0.9 2 3 19 R 1 2.8 1.6 N 4 4 3 9 18 R L 0 0.8 1.05 3 -0.1 2.8 8.6 18.45 0.8 7 8.15 6.16 8 4.15 10 45 ±0.1 27.55 11 3 25.75 2.4 1.3 10.2 8.25 with insulation cover The size of the mounting cut-out can be selected as required. Fixation on PCB or housing from below Fixation on PCB or housing from above +0.30 11 +0.15 14.3 1) M3x12 1) M3x12 0 5.9- 0.1 1) self tapping screw 13 1.6 13.4 9 9 ±0.1 4.2±0.05 11±0.13 1) self tapping screw Drilling diagrams CMF1 and CMF2 (C8) 10.2 8.25 7 +0.1 0 1.6 11 +0.1 0 D1 21.6 10 3 3 1.6 5.3 6.16 8.6 3.2 23.4 45±0.1 28.05 29.85 Variants Connectors Mounting side C8p from below C8p from below C8p from top C8p from top Packaging unit Cover l l Ground terminal Ground terminal direction Order Number - - CMF2.1031.12 - - CMF2.1131.12 - - CMF2.1011.12 - - CMF2.1111.12 50 Pcs Connectors Power entry modules without line filter CMF2, CMF5 www.schurter.com/pg05 Mating Outlets/Connectors Category / Description Power Supply or Interconnection Cord Overview complete Divers Power Supply and Interconnection Cords 2.5 A CS02.0221.150 Power Supply or Interconnection Cord further types to CMF2, CMF5 The specifications, descriptions and illustrations indicated in this document are based on Connectors current information. All content is subject to modifications and amendments.