GP10A THRU GP10Y 70V-100V SINTERED GLASS PASSIVATED JUNCTION RECTIFIER 2.0A FEATURES * * * * GPRC (Glass Passivated Rectifier Chip) inside Glass passivated cavity-free junction Capable of meeting environmental standards of MIL-S-19500 o o 1.0 Ampere operation at TA=75 C and 55 C with no thermal runaway * Typical IR less than 0.1uA o * High temperature soldering guaranteed: 260 C/10 seconds, 0.375" (9.5mm) lead length, 5lbs. (2.3 kg) tension * Plastic package has Underwriters Laboratory Flammability Classification 94V-0 MECHANICAL DATA Case : JEDEC DO-204AL molded plastic over glass body Terminals : Plated axial leads , solderable per MIL-STD-750, Method 2026 Polarity : Color band denotes cathode end Mounting Position : Any Weight : 0.012 ounes , 0.3 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Maximum Ratings & Thermal Characteristics Parameter Symbol A B D G J K M N Q T V W Y Unit Maximum repetitive peak reverse voltage VRRM 50 to 1600V Maximum average forward rectified current 0.375" (9.5mm) lead length (See fig. 1) IF(AV) 1.0 Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM Maximum full load reverse current, full cycle average, 0.375" (9.5mm) lead lengths at TA = 75¡C IR(AV) 30 µA Typical thermal resistance (Note 1) RθJA 55 ¡C/W Operating junction and storage temperature range TJ, TSTG V (See Fig. 5) A 30 25 Ð65 to +175 Ð65 to +150 A ¡C Electrical Characteristics Parameter Symbol A B D G J V W Y 1.2 1.3 Unit Maximum instantaneous forward voltage at 1.0A VF Maximum DC reverse current at rated DC blocking voltage IR 5.0 50 µA trr 3.0 µs TA = 25¡C TA = 125¡C Typical reverse recovery time at IF = 0.5A, IR = 1.0A, Irr = 0.25A Typical junction capacitance at 4.0V, 1MHz CJ 1.1 K M N Q T 8.0 7.0 5.0 V pF NOTES : (1) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts (2) Thermal resistance from junction to ambient at 0.375" (9.5mm) lead lengths, P.C.B. mounted. E-mail: [email protected] 1 of 2 Web Site: www.taychipst.com GP10A THRU GP10Y 70V-100V SINTERED GLASS PASSIVATED JUNCTION RECTIFIER RATINGS AND CHARACTERISTIC CURVES GP10A THRU GP10Y FIG.1 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT FIG.2 - FORWARD CURRENT DERATING CURVE 30 1.0 AVERAGE FORWARD RECTIFIED CURRENT, AMPERES PEAK FORWARD SURGE CURRENT, AMPERES 2.0A TJ=TJ max. 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 25 20 GP10A~GP10M 15 GP10N~GP10Y 10 RESISTIVE OR INDUCTIVE LOAD GP10A~GP10M GP10N~GP10Y 0.5 0.375" (9.5mm) LEAD LENGTH 5.0 1 10 0 100 0 NUMBER OF CYCLES AT 60Hz 25 50 75 100 125 150 175 o AMBIENT TEMPERATURE, C FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG. 4 - TYPICAL REVERSE CHARACTERISTICS 10.0 10 Instantaneous Reverse Current (µA) INSTANTANEOUS FORWARD CURRENT, AMPERES 20.0 GP10A~GP10M 1.00 o TJ = 25 C PULSE WIDTH=300uS 1% DUTY CYCLE GP10N~GP10Y 0.01 0.01 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 INSTANTANEOUS FORWARD VOLTAGE, VOLTS TJ = 125°C 1 TJ = 75°C 0.1 0.01 TJ = 25°C 0.001 0 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) FIG.5- TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE.(pF) 20 Tj=250C f=1.0MHz Vsig=50mVp-p 10 8 6 4 2 1 0.1 0.4 1 4 10 40 100 REVERSE VOLTAGE. (V) E-mail: [email protected] 2 of 2 Web Site: www.taychipst.com