1N4383GP THRU 1N4385GP 1N4585GP THRU 1N4586GP 200V-1000V GLASS PASSIVATED JUNCTION RECTIFIER 1.0A FEATURES • Superectifier application structure for high reliability • Cavity-free glass-passivated junction • Low forward voltage drop • Low leakage current • High forward surge capability • Meets environmental standard MIL-S-19500 • Solder dip 275 °C max. 10 s, per JESD 22-B106 • AEC-Q101 qualified • Compliant to RoHS Directive 2002/95/EC accordance to WEEE 2002/96/EC and in MECHANICAL DATA Case: JEDEC DO-204AC molded plastic over glass body Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.015 ounce, 0.4 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS 1N 4383GP 1N 4384GP 1N 4385GP 1N 4585GP 1N 4586GP UNITS Maximum repetitive peak reverse voltage V RRM 200 400 600 800 1000 Volts Maximum RMS voltage V RMS 140 280 420 560 700 Volts Maximum DC blocking voltage V DC 200 400 600 800 1000 Volts Maximum average forward rectified current 0.375" (9.5mm) lead length at TA=100°C I(AV) 1.0 Amp Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) at TA=100°C IFSM 50.0 Amps VF 1.0 Volts IR 5.0 250.0 µA trr 2.0 µs Maximum instantaneous forward voltage at 1.0A TA=25°C TA=150°C Maximum DC reverse current at rated DC blocking voltage (NOTE 1) Maximum full load reverse current full cycle average at 0.375" (9.5mm) lead length at TA=100°C Typical junction capacitance (NOTE 2) Typical thermal resistance (NOTE 3) IR(AV) 275 250 225 200 200 µA CJ 15.0 pF RΘJA 45.0 °C/W -65 to +175 °C J, TSTG NOTES: (1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts (3) Thermal resistance from junction to ambient at 0.375" (9.5mm) lead length, P.C.B. mounted * JEDEC registered values E-mail: [email protected] 1 of 2 Web Site: www.taychipst.com 1N4383GP THRU 1N4385GP 1N4585GP THRU 1N4586GP 200V-1000V GLASS PASSIVATED JUNCTION RECTIFIER ATINGS AND CHARACTERISTIC CURVES 1N4383GP THRU 1N4385GP 1N4585GP,1N4586GP 50 Peak Forward Surge Current (A) Average Forward Rectified Current (A) 1.0 0.8 0.6 0.4 60 Hz Resistive or Inductive Load 0.375" (9.5 mm) Lead Length 0.2 TA = 100 °C 8.3 ms Single Half Sine-Wave 40 30 20 10 0 0 25 50 75 100 125 150 175 1 200 100 Number of Cycles at 60 Hz Fig. 1 - Forward Current Derating Curve Fig. 2 - Maximum Non-repetitive Peak Forward Surge Current 100 Junction Capacitance (pF) Instantaneous Forward Current (A) 10 Ambient Temperature (°C) 100 10 1 TJ = 25 °C Pulse Width = 300 μs 1 % Duty Cycle 0.1 0.01 0.4 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 10 1 0.6 0.8 1.0 1.2 1.4 1 1.6 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 5 - Typical Junction Capacitance 100 Transient Thermal Impedance (°C/W) 10 Instantaneous Reverse Leakage Current (μA) 1.0A TJ = 125 °C 1 TJ = 75 °C 0.1 TJ = 25 °C 20 40 60 80 1 0.1 0.01 0.01 0 10 100 0.1 1 10 100 Percent of Rated Peak Reverse Voltage (%) t - Pulse Duration (s) Fig. 4 - Typical Reverse Characteristics Fig. 6 - Typical Transient Thermal Impedance E-mail: [email protected] 2 of 2 Web Site: www.taychipst.com