S2AA THRU S2MA 50V-1000V 2.0A SURFACE MOUNT GLASS PASSIVATED STANDARD DIODE FEATURES ! ! ! ! ! ! ! Glass Passivated Die Construction Ideally Suited for Automatic Assembly Low Forward Voltage Drop Surge Overload Rating to 60A Peak Low Power Loss Built-in Strain Relief Plastic Case Material has UL Flammability Classification Rating 94V-O MECHANICAL DATA ! ! ! ! ! ! Case: SMA/DO-214AC, Molded Plastic Terminals: Solder Plated, Solderable per MIL-STD-750, Method 2026 Polarity: Cathode Band or Cathode Notch Marking: Type Number Weight: 0.064 grams (approx.) Lead Free: For RoHS / Lead Free Version, Add “-LF” Suffix to Part Number, See Page 4 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current @TL = 110°C Symbol S2AA S2BA S2DA S2GA S2JA S2KA S2MA Unit VRRM VRWM VR 50 100 200 400 600 800 1000 V VR(RMS) 35 70 140 280 420 560 700 V IO 2.0 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) IFSM 60 A Forward Voltage @IF = 2.0A VFM 1.10 V @TA = 25°C @TA = 125°C IRM 5.0 200 µA Reverse Recovery Time (Note 1) trr 2.5 µS Typical Junction Capacitance (Note 2) Cj 30 pF RJL 16 °C/W Tj, TSTG -55 to +150 °C Peak Reverse Current At Rated DC Blocking Voltage Typical Thermal Resistance (Note 3) Operating and Storage Temperature Range Note: 1. Measured with IF = 0.5A, IR = 1.0A, Irr = 0.25A, 2. Measured at 1.0 MHz and applied reverse voltage of 4.0 V DC. 3. Mounted on P.C. Board with 8.0mm2 land area. E-mail: [email protected] 1 of 2 Web Site: www.taychipst.com S2AA THRU S2MA 50V-1000V 2.0A SURFACE MOUNT GLASS PASSIVATED STANDARD DIODE IAV, AVERAGE FORWARD CURRENT (A) 2.5 2.0 1.5 1.0 0.5 Resistive or inductive load 0 20 40 60 80 100 120 140 160 IF, INSTANTANEOUS FORWARD CURRENT (A) RATINGS AND CHARACTERISTIC CURVES 0.1 Tj = 25°C IF PULSE WIDTH = 300 µS 0.01 0.5 0.9 1.1 1.3 1.5 Fig. 2 Typical Forward Characteristics Single Half-Sine-Wave JEDEC Method IR, INSTANTANEOUS REVERSE CURRENT ( A) IFSM , PEAK FORWARD SURGE CURRENT (A) 0.7 VF, INSTANTANEOUS FORWARD VOLTAGE (V) 60 50 40 30 20 10 0 1000 100 Tj = 125°C 10 1.0 Tj = 25°C 0.1 0.01 100 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) NUMBER OF CYCLES AT 60 Hz Fig. 3 Forward Surge Current Derating Curve E-mail: [email protected] S2MA 1.0 Fig. 1 Forward Current Derating Curve 10 THRU 10 TL , LEADTEMPERATURE (ºC) 1 S2AA Fig. 4 Typical Reverse Characteristics 2 of 2 Web Site: www.taychipst.com