FlatPAC-EN MI New Rugged COTS FlatPAC-EN General Specifications Size FlatPAC-EN MI Features Input voltage 90 – 132 / 180 – 264, 47 – 63 Hz 250 – 380 Vdc Up to 4 configurable outputs Vibration: MIL-STD-810 minimum integrity Shock: MIL-STD-810 40 G functional shock Conducted emissions: EN55022 Class A Class B configuration dependent Operating temperature: -20°C to 70°C ambient (see derating curves) -20°C to 90°C case temp -40°C operation optional Maximum output power: 500 W @ 115 / 230 Vac 425 W for EN compliance 9.2 x 5.0 x 1.4 in. (233,7 x 127 x 35,6 mm) Modules complement VI-200, VI-J00, Maxi, Mini, Micro Harmonic distortion EN61000-3-2 / A14, 425 W @ 230 Vac Voltage fluctuations and flicker EN61000-3-3 ESD susceptibility EN61000-4-2, Level 4, Performance Criteria A Radiated susceptibility EN61000-4-3, Level 4, Performance Criteria A EFT/ Burst EN61000-4-4, Level 4, Performance Criteria B Surge immunity EN61000-4-5, Installation Class 3, Performance Criteria B (Configuration dependent) RF common mode EN61000-4-6, Performance Criteria A Voltage dips and interrupts EN61000-4-11, Performance Criteria B Input current 9 A rms max. Input frequency 47 – 500 Hz Inrush current 14 A pk Dielectric withstand Primary to Chassis GND = 2,121 Vdc; Primary to Secondary = 4,242 Vdc; Secondary to Chassis GND = 750Vdc Output ripple and noise Standard 2% or 100 mV whichever is greater Load regulation VI-2 / VI-J ± 0.2%; 10% to full load ± 0.5%; No load to 10% load Load regulation Maxi, Mini, Micro ± 0.1% of Vnom; No load to full load Efficiency >70% typical Weight 3.4 lbs. (1.5 kg) max. Safety agency approvals UL, cTÜVus, CE Marked and CB report Warranty 2 years limited warranty Power factor: >0.70 Conduction / convection cooled Optional conformal coating For more details about any Westcor products, contact the factory at 1-800-735-6200 or go to our website at v i c o r p o w e r. c o m