AC-DC 60 Watts xppower.com PDM60 Series • Medical & Industrial/IT Approvals • 4000 VAC Isolation • Class II Construction • Single Outputs from 12 V to 48 V • High Efficiency • Non-standard Connectors Available • Operation to +60 °C Specification Input Input Voltage Input Frequency Input Current Inrush Current Power Factor Input Protection General • • • • 85-264 VAC 47-63 Hz 1.5 A rms max at 85 VAC 30/60 A max at 115/230 VAC cold start at +25 ºC • Compliant with EN61000-3-2 Class A equipment • Internal fuse in live line Output Output Voltage Initial Set Accuracy Minimum Load Start Up Delay Start Up Rise Time Hold Up Time Drift Line Regulation Load Regulation Transient Response • • • • • • • • • • Ripple & Noise Overvoltage Protection Overload Protection Short Circuit Protection Temperature Coefficient • • • • • See table ±1% at 50% load No minimum load required <500 ms 40 ms typical 12 ms min at 115 VAC & 100% load <±0.2% after 20 minute warm up ±0.5% ±3% 4% max. deviation, recovery to within 1% in 500 µs for a 25% load change at 1 A/µs 1% pk-pk, 20 MHz BW (see note 2) 115-150%, recycle input to reset 120-170%, auto recovery Trip and restart (Hiccup mode) indefinite ±0.05%/ºC Efficiency Isolation Switching Frequency Power Density MTBF • • • • • 80% typical 4000 VAC Input to Output 55 kHz typical 2.7 W/in3 >420 kHrs per MIL-HDBK-217F, +40 ºC ground benign Environmental Operating Temperature • -10 ºC to +60 ºC, derate above +40 ºC by 2.5%/ºC to 50% load at +60 ºC Operating Humidity • 5-95% RH, non-condensing Storage Temperature • -20 ºC to +85 ºC Operating Altitude • 3000 m max Shock • 30 g pk, half sine, 6 axes Vibration • 2 g, 5-500 Hz, 3 axes EMC & Safety Emissions Harmonic Currents Voltage Flicker ESD Immunity Radiated Immunity EFT/Burst Surge Conducted Immunity Dips & Interruptions Safety Approvals • EN55022, level B conducted EN55022, level B radiated, EN60601-1-2, EN61204-3, FCC 20780 level B • EN61000-3-2, class A • EN61000-3-3 • EN61000-4-2, level 3 Perf Criteria A • EN61000-4-3, 10 V/m, 80% mod Perf Criteria A • EN61000-4-4, level 3 Perf Criteria A • EN61000-4-5, level 3 Perf Criteria A • EN61000-4-6, 10 Vrms, 80% mod Perf Criteria A • EN61000-4-11, 70% UT 10 ms, 40% UT 100 ms, <5% UT 5000 ms Perf Criteria A, B, B • EN60601-1-1, UL60601-1-1:2003, CSA60601-1, EN60950-1:2001, UL/cUL60950, CE Mark, CCC Mark Output Power 55 W 60 W 60 W 60 W 60 W 60 W 60 W Output Voltage 12 V 15 V 18 V 24 V 30 V 36 V 48 V Output Current 4.60 A 4.00 A 3.30 A 2.50 A 2.00 A 1.70 A 1.25 A Model Number(1) PDM60US12 PDM60US15 PDM60US18 PDM60US24 PDM60US30 PDM60US36 PDM60US48 Notes 1. IEC320-C18 input connector fitted as standard. For IEC320-C8 input connector add suffix ‘-C8’ to model number. 2. Measured at output connector, decoupled by 0.47 µF capacitor. Mechanical Details 1.61 (41.0) AC INPUT IEC 320-C18 INLET 5.31 (135.0) 2.56 (65.0) LED AC INPUT IEC 320-C8 INLET 2.75±0.20 (70.0±5.0) 0.37±0.01 (9.5±0.3) ø0.10 (ø2.5) CORE ø0.22 (ø5.5) DC OUTPUT POLARITY Notes 1. 2. 3. 4. Dimensions shown in inches (mm). Tolerance specified is ±0.04 (1.0). Cable length is 72” (1830mm) approx. Weight 1.28 lbs (580 g). Derating Curve Load (%) 100 80 60 40 20 0 -10 0 10 20 30 40 50 60 70 Ambient Temp (˚C) 17-Apr-07 AC-DC PDM60 Models and Ratings