VER : A_5 update : 2015.05.15 LED Power QLF60 SERIES 60 Watts KEY FEATURES IP66/67 Design for Indoor or LED Outdoor Installations With Constant Current & Constant Voltage (C.C+C.V mode) With P.F.C. Function, PF>0.9 High Efficiency up to 90% Free Air Convection Protections: Over Load / Over Voltage / Short Circuit High Reliability & Double Layered PCB Suitable for LED lighting and moving sign applications Ultra Compact Size: 4.72 x 2.36 x 1.38 Inches 3-Year Product Warranty ELECTRICAL SPECIFICATIONS All specifications valid at normal input voltage, full load and +25°C after warm-up time unless otherwise stated. Model No. QLF60-24S Max output wattage (W) (Note2) 50 / 60 Hz Power factor PF>0.9 at Full load (115 VAC / 230 VAC) Current (Full load) 0.8A (115 VAC) / 0.4A (230 VAC) (at 230 VAC) < 0.7 mA max at 240 VAC Voltage (V.DC.) 24V 36V 48V 54V 22 ~ 26.5V 33 ~ 39.5V 44 ~ 51.5V 49 ~ 55V Constant Current Operation Voltage (max) (CC Mode) (Note3) (CV Mode) 15.6~ 24 VDC 23.4~36 VDC 36~48 VDC 35.1~54 VDC Voltage Tolerance Preset Current (mA) (at IP66) (CC Mode) (at 230 VAC) Current Adjustment Range (mA) (CC Mode) Preset Current (mA) (at IP67) (CC Mode) (fixed) (Note4) (at 230 VAC) Minimum Load (mA) ±10% 2450 1750 1050 1050 2000~2500 1350~1750 1000~1300 900~1150 2450 (2000~2500) 1750 (1350~1750) 1250 (1000~1300) 1050 (900~1150) 2000 1350 1000 900 Line Regulation (typ.) ±4% (110-240 VAC) Load Regulation (Min-Max) (typ.) Isolation 45 A max. Leakage Current Voltage ADJ Range Setup Protection QLF60-54S 90-295 VAC Frequency (Hz) Inrush current Output QLF60-48S 60W Voltage Input QLF60-36S ±5% Ripple & Noise (typ.) (Note1) 2.7Vp-p Efficiency (at 230VAC / Full Load)(typ) 89% Over current protection Auto recovery Over voltage protection Zener diode clamp Short circuit protection Auto recovery Input-Output (V.AC) 3750V Input-FG (V.AC) 1880V Output-FG .(V.AC) Operating temperature 5Vp-p 500V -30°C…+70°C (with derating) Storage temperature -40°C…+85°C Temperature coefficient 0.02%/°C Humidity 95% RH MTBF >450,000 h @ 25°C (MIL-HDBK-217F) Dimension (L x W x H) 4.72 x 2.36 x 1.38 Inches Weight 600 g Cooling method Free air convection Safety Agency Approvals UL8750、IEC / EN 61347-2-13、 IEC / EN 61347-1 EMC EMI (Conducted & Radiated Emission) EMS (Noise Immunity) EN 61547 Harmonic Current EN 61000-3-2(at Full Load)、EN 61000-3-3 Surge 2KV L-N, 4KV L N-FG Environment Physical http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 ( 120.0 x 60.0 x 35.0 mm ) Tolerance 2mm EN 55015 -1- VER : A_5 update : 2015.05.15 LED Power QLF60 SERIES 60 Watts Note: 1. Ripple & Noise are measured at 20MHz of bandwidth with 0.1uF & 47uF parallel capacitor. 2. Please check the derating curve for more details. 3. Input Voltage=115 or 230 VAC。This is the suitable operation region for LED related application.but please reconfirm special electrical requirements for some specific system design. 4. Please contact us for more information. 5. It's recommended to add Varistor 14S561K at L / N input side in parallel. 6. This driver is suggested for LED application only. 7. Direct connection to LEDs is suggested. Connecting additional drivers would not be appropriate. This series has IP66 and IP67, when you place order, please be noted as ordering Part No. Model No. Ordering Part No MECHANICAL DIMENSION QLF60-24S QLF60-36S QLF60-48S QLF60-54S IP66 QLF60-24S-IP66 QLF60-36S-IP66 QLF60-48S-IP66 QLF60-54S-IP66 IP67 QLF60-24S-IP67 QLF60-36S-IP67 QLF60-48S-IP67 QLF60-54S-IP67 ( Top View ) BLOCK DIAGRAM ASSEMBLY INSTRUCTIONS *U Case T=2.0mm Customer screws into the length of the case no higher than 0.5mm (Namely screw length for load plate thickness plus 2.5mm DERATING http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 -2-