VER : A_3 update : 2015.05.15 LED Power PSF60 SERIES 60 Watts KEY FEATURES Fully Isolated Plastic Case with IP67 Level With Constant Current & Constant Voltage (C.C+C.V mode) With P.F.C. Function, PF>0.9 High Efficiency up to 89% Free Air Convection Protections: Over Load / Over Voltage / Short Circuit High Reliability & Double Layered PCB Suitable for LED lighting and moving sign applications Isolation Class II 3-Year Product Warranty ELECTRICAL SPECIFICATIONS All specifications valid at normal input voltage, full load and +25°C after warm-up time unless otherwise stated. Model No. PSF60-24S Max output wattage (W) (Note2) 50 / 60 Hz Power factor PF>0.9 at Full load (115 VAC / 230 VAC) Current (Full load) 0.8A (115 VAC) / 0.4A (230 VAC) (at 230 VAC) < 0.7 mA max at 240 VAC Voltage (V.DC.) 24V 36V 48V 54V 22 ~ 26.5V 33 ~ 39.5V 44 ~ 51.5V 49 ~ 55V Constant Current Operation Voltage (max) (CC Mode) (Note3) 15.6~ 24 VDC 23.4~36 VDC 36~48 VDC 35.1~54 VDC Voltage Tolerance Preset Current (mA) (CC Mode) (fixed) Minimum Load (mA) ±10% 2450 (2000~2500) 1750 (1350~1750) 1250 (1000~1300) 1050 (900~1150) 2000 1350 1000 900 Line Regulation (typ.) (CV Mode) (at 230 VAC) (110-240 VAC) Load Regulation (Min-Max) (typ.) Isolation 45 A max. Leakage Current Voltage ADJ Range Setup Protection PSF60-54S 90-295 VAC Frequency (Hz) Inrush current Output PSF60-48S 60W Voltage Input PSF60-36S ±4% ±5% Ripple & Noise (typ.) (Note1) 2.7Vp-p Efficiency (at 230VAC / Full Load)(typ) 89% Over current protection Auto recovery Over voltage protection Zener diode clamp 5Vp-p Short circuit protection Auto recovery Input-Output (V.AC) 3750V Operating temperature -30°C…+70°C (with derating) Storage temperature -40°C…+85°C Temperature coefficient 0.02%/°C Humidity 95% RH MTBF >450,000 h @ 25°C (MIL-HDBK-217F) Dimension (L x W x H) 5.67 x 2.76 x 1.48 Inches Weight 640 g Cooling method Free air convection Safety Agency Approvals UL8750、IEC / EN 61347-2-13、 IEC / EN 61347-1 EMC EMI (Conducted & Radiated Emission) EMS (Noise Immunity) EN 61547 Harmonic Current EN 61000-3-2(at Full Load)、EN 61000-3-3 Surge 2KV L-N Environment Physical http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 ( 144.0 x 70.0 x 37.5 mm ) Tolerance 2mm EN 55015 -1- VER : A_3 update : 2015.05.15 LED Power PSF60 SERIES 60 Watts Note: 1. Ripple & Noise are measured at 20MHz of bandwidth with 0.1uF & 47uF parallel capacitor. 2. Please check the derating curve for more details. 3. Input Voltage=115 or 230 VAC。This is the suitable operation region for LED related application.but please reconfirm special electrical requirements for some specific system design. 4. Please contact us for more information. 5. It's recommended to add Varistor 14S561K at L / N input side in parallel. 6. This driver is suggested for LED application only. 7. Direct connection to LEDs is suggested. Connecting additional drivers would not be appropriate. MECHANICAL DIMENSION ( Top View ) DERATING BLOCK DIAGRAM http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 -2-